GB/T 23615.2-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23615.2-2017: Thermal barrier materials for architectural aluminum alloy profiles-- Part 2: Thermal barrier polyurethane Status: Valid GB/T 23615.2: Historical versions
Basic dataStandard ID: GB/T 23615.2-2017 (GB/T23615.2-2017)Description (Translated English): Thermal barrier materials for architectural aluminum alloy profiles-- Part 2: Thermal barrier polyurethane Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H30 Classification of International Standard: 91.100.60 Word Count Estimation: 18,138 Date of Issue: 2017-10-14 Date of Implementation: 2018-05-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 23615.2-2017: Thermal barrier materials for architectural aluminum alloy profiles-- Part 2: Thermal barrier polyurethane---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Thermal barrier materials for architectural aluminum alloy profiles─ Part 2. Thermal barrier polyurethane ICS 91.100.60 H30 National Standards of People's Republic of China Replacing GB/T 23615.2-2012 Aluminum alloy building profiles with insulation materials Part 2. Polyurethane thermal insulation Part 2.Thermalbarrierpolyurethane 2017-10-14 Published 2018-05-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China China National Standardization Administration released ForewordGB/T 23615 "insulating aluminum building profiles with" divided into two parts. --- Part 1. Polyamide profiles; --- Part 2. Polyurethane thermal adhesive. This section GB/T 23615 Part 2. This section drafted in accordance with GB/T 1.1-2009 given rules. This Part Replaces GB/T 23615.2-2012 "Aluminum Alloy Building Auxiliary Materials Part 2. Polyurethane thermal adhesive." This section and GB/T 23615.2-2012 compared to editorial changes in addition to the main technical changes are as follows. --- Increasing the normative references GB/T 1040.1, GB/T 2013, GB/T 10297, GB/T 12008.1, GB/T 12008.2, GB/T 12008.3, GB/T 22313 (see Chapter 2); --- Modify the original plastic type, code, the main components and instructions (see 4.1.1,.2012 version 4.1); --- Modify the thermal insulation performance level, the characteristics of the original plastic components and typical uses (see 4.1.2,.2012 version 4.1); --- Added insulation tape marks and examples (see 4.1.3); --- Increase the harmful substances in the original plastic limit (see 4.2.1); --- Increasing the moisture content of the original rubber performance requirements (see 4.2.2); --- Increase the viscosity of the original plastic performance requirements (see 4.2.2); --- Increasing the density of the original gel (see 4.2.2); --- Increasing the original rubber hydroxyl value requirements (see 4.2.2); --- Increasing the purity requirements of the original gum (see 4.2.4); --- Modify the load deflection temperature rating (see 4.3,.2012 edition 4.3.1); --- Modify the notched Izod impact strength at room temperature (see 4.3,.2012 edition 4.3.1); --- Increased the notched Izod impact strength of low temperature (see 4.3); --- Modify the Shore hardness rating (see 4.3,.2012 edition 4.3.1); --- Modify the tensile strength at room temperature specified value (see 4.3,.2012 Edition 4.3.1); --- Modify the room temperature elongation at break the provisions of (see 4.3,.2012 Edition 4.3.1); --- Modify the provisions of low temperature tensile strength (see 4.3,.2012 edition 4.3.1); --- Increased the provisions of high temperature tensile strength (see 4.3); --- Modify the UV aging properties at room temperature cantilever notched impact strength provisions (see 4.3,.2012 Edition 4.3.1); --- Modify the UV aging properties of tensile strength at room temperature specified value (see 4.3,.2012 Edition 4.3.1); --- Modify the thermal conductivity of the specified value, given the typical thermal conductivity (see 4.3,.2012 Edition 4.3.1); --- Increasing the typical linear expansion coefficient (see 4.3); --- Increasing the curing heat release temperature typical (see 4.3); --- Remove the wet shrinkage (see.2012 version 4.5); --- Remove the insulation profile standard sample requirements (see.2012 version 4.6); --- Increased ambient temperature (see 5.1); --- Increased test temperature (see 5.2); --- Modify the plastic mold size (see 5.4.1,.2012 Edition 5.3.1); --- Modify the tensile specimen size (see 5.4.7.1,.2012 Edition 5.3.8.1); --- Modify the curing temperature of the test method (see 5.4.12,.2012 5.4); --- Increased adaptive test methods (see 5.5); --- Increased pendulum impact test machine schematic (see B.2.1); --- Modify the notched Izod specimen size (see B.3.1,.2012 edition B.4.1); --- Increased notched Izod impact notches schematic (see B.4.2). This part is proposed by China Nonferrous Metal Industry Association. This part of the National Non-ferrous Metal Standardization Technical Committee (SAC/TC243) centralized. This section drafted unit. Ason Polyurethane (Shanghai) Co., Ltd., the State Chemical Building Materials Testing Center, Guangdong Province, industrial analysis and testing Center, Dalian Gurui Polyurethane Co., Ltd., Huzhou Beckman New Materials Co., Ltd., Guangzhou Thun Chemical Materials Co., Ltd., Buddha High-tech Materials Co., Ltd. Hill City, the National Nonferrous Metals Quality Supervision and Inspection Center, Fujian Nanping Aluminum Co., Ltd., Guangdong Jian Aluminum Profile Factory (Group) Co., Ltd., Guangdong Guangya Aluminum Co., Ltd., BASF Polyurethane Specialty Products (China) Co., Ltd., Aluminum Co., Ltd., Suzhou Robertson Aluminum Co., Ltd. The main drafters of this section. He Zhencheng, Ding Jinhai, Liu Tao, Yu Youping, Dong Ming Quan, Hou Zhao Branch, Xia Jianjun, Liu Yanbin, Zhang Hongju, Feng Dongsheng, Dai Yuexing, Pan Xuezhu, Zhou Yangchun, Qi Jinxing, Zhou Jianmin. This part replaces the standards previously issued as. --- GB/T 23615.2-2012. Aluminum alloy building profiles with insulation materials Part 2. Polyurethane thermal insulation1 ScopeGB/T 23615 provisions of this part of the polyurethane insulation requirements, test methods, inspection rules and signs, packaging, transportation, storage And quality certificate and purchase order (or contract) content. This section applies to isocyanate compounds and polyol combinations (hereinafter referred to as the original plastic) made by the cross-linking reaction of aluminum building profiles Insulation materials (ie, polyurethane insulation adhesive, hereinafter referred to as insulation).2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version applies to this article Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 1033.1-2008 Plastics - Determination of density of non-foamed plastics - Part 1. Immersion method, liquid pyknometer method and titration method GB/T 1036 Plastics - 30 ℃ ~ 30 ℃ linear expansion coefficient of determination Quartz dilatometer GB/T 1040.1 Determination of plasticity - Part 1. General GB/T 1040.2 Determination of tensile properties of plastics - Part 2. Test conditions for molding and extrusion of plastics GB/T 1634.1 Plastics - Determination of load deflection temperature - Part 1. General test methods Determination of GB/T 1843 plastic Izod impact strength GB/T 2013 Liquid petroleum chemical product densitometry GB/T 2411-2008 Plastics and hard rubbers Determination of indentation hardness (Shore hardness) using a durometer Aluminum alloy building profiles - Part 1. Substrates Aluminum alloy building profiles - Part 6. Thermal insulation profiles Determination of steady - state thermal resistance of insulation materials and related properties GB/T 10295 Heat flow meter method GB/T 10297 Determination of thermal conductivity of non-metallic solid materials Hot-wire method GB/T 12008.1 Plastics - Polyether polyols - Part 1. Nomenclature system GB/T 12008.2 Plastics polyether polyols - Part 2. Specifications GB/T 12008.3 Plastics - Polyether polyols - Part 3. Determination of hydroxyl value GB/T 12008.7 Plastics - Polyether polyols - Part 7. Determination of viscosity Laboratory exposure methods for plastic laboratories - Part 3. Fluorescent UV lamps GB/T 21189-2007 Testing of plastic simply supported beams, cantilevers and tensile impact tests with pendulum impact testing machine GB/T 22313 Plastics Polyurethanes for the production of water - Determination of water content GB/T 28289 aluminum alloy insulation profiles composite performance test methods3 Terms and definitionsThe following terms and definitions apply to this document. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23615.2-2017_English be delivered?Answer: Upon your order, we will start to translate GB/T 23615.2-2017_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23615.2-2017_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23615.2-2017_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 23615.2-2017?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23615.2-2017 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
