GB/T 23567.1-2009 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23567.1-2009: Reliability evaluation for numeric control machine tools -- Part 1: General rule
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23567.1-2009	369	Add to Cart	3 days	Reliability evaluation for numeric control machine tools -- Part 1: General rule	Valid

Similar standards

GB/T 28615   GB/T 24343   GB/T 24344   GB/T 23567.3   GB/T 23567.2   GB/T 23571   

Basic data

Standard ID: GB/T 23567.1-2009 (GB/T23567.1-2009)
Description (Translated English): Reliability evaluation for numeric control machine tools -- Part 1: General rule
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J50
Classification of International Standard: 25.040.20
Word Count Estimation: 16,120
Date of Issue: 2009-04-13
Date of Implementation: 2010-01-01
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the CNC machine (hereinafter referred to as Machine) performing reliability verification, determination, trouble determining when the principles of assessment, sampling principles, test methods, data processing, outcome assessment of the total requirement. This section applies to verify the reliability of CNC machine tool products, determination, identification and assessment. Preparation of all types of CNC machine tools can complement the corresponding reliability evaluation method based on the principles and requirements of this section.

GB/T 23567.1-2009: Reliability evaluation for numeric control machine tools -- Part 1: General rule

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Reliability evaluation for numercal control machine tools Part 1. General rule ICS 25.040.20 J50 National Standards of People's Republic of China Reliability Evaluation of CNC machine tools Part 1. General Posted 2009-04-13 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions Failure determination 2 4 5 3 Sampling 6 Test mode 3 7 Test Condition 3 8 Test Method 4 5 9 Fault Monitoring 10 data collection 5 11 reliability assessment index 6 12 results found 7 Appendix A (normative) on the reliability of the correction coefficient k 8 Annex B (informative) reliability test run record 9 Annex C (informative) Reliability Test Fault Record 10 Annex D (informative) Failure Analysis Report 11

Foreword

GB/T 23567 "CNC machine tools' reliability assessment" is divided into eight sections. --- Part 1. General; --- Part 2. machining centers; --- Part 3. CNC lathe; --- Part 4. CNC milling machine; --- Part 5. CNC grinder; --- Part 6. CNC gear cutting machine; --- Part 7. five-axis machine tools; --- Part 8. multitasking machine. This section GB/T Part of 123,567. Appendix A of this section is normative appendix, Appendix B, Appendix C and Appendix D is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the National Metal Cutting Machine Standardization Technical Committee (SAC/TC22) centralized. This section is drafted. Beijing Machine Tool Research Institute, the National Machine Products Quality Supervision and Inspection Center. The main drafters of this section. Zhang, Lixiang Wen, Zhao Qin Zhi, the official Dragon Boat Festival. Reliability Evaluation of CNC machine tools Part 1. General

1 Scope

This section GB/T 23567 specifies the CNC machine tools (hereinafter referred to as the machine) during the reliability verification, measurement, fault judgment when assessing Fixed principles, principles of sampling, test methods, data processing, evaluation of the results of the overall requirements. This section applies to verify the reliability of CNC machine tools, measuring, identification and assessment. All types of CNC machine tools can complement the preparation of the corresponding reliability assessment method based on the principles and requirements of this section.

2 Normative references

The following documents contain provisions which, through reference GB/T 23567 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 3187-1994 reliability, maintainability terms

3 Terms and Definitions

GB/T 3187 and established the following terms and definitions apply to this part of the GB/T 23567 of. 3.1 The product can not perform the specified functions of the state. Except in the case of preventive maintenance or other planned activities or lack of external resources. Failure is usually after the failure of the state of the product itself, but may also fail before existed. [GB/T 3187-1994,4.2.1] 3.2 Or work in the interpretation of test results must be included in the calculation of the reliability values \u200b\u200bat or fault. Guidelines should be included in the regulations. [GB/T 3187-1994,4.1.13] 3.3 Or in the interpretation of the test results of the work or the reliability of the calculation values \u200b\u200bshould be excluded faults. [GB/T 3187-1994,4.1.14] 3.4 Products allow use beyond the scope of failure caused. [GB/T 3187-1994,4.2.6] 3.5 Due to careless or improper operation of the product failure. [GB/T 3187-1994,4.2.7] ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23567.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23567.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23567.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23567.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.