GB/T 23564.4-2009 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23564.4-2009: Die steel plate rolling die holder guide -- Part 4: Four die holder guide post
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23564.4-2009	189	Add to Cart	3 days	Die steel plate rolling die holder guide -- Part 4: Four die holder guide post	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 23564.3   GB/T 23562.1   GB/T 23564.2   

Basic data

Standard ID: GB/T 23564.4-2009 (GB/T23564.4-2009)
Description (Translated English): Die steel plate rolling die holder guide -- Part 4: Four die holder guide post
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 8,814
Date of Issue: 2009-04-02
Date of Implementation: 2010-01-01
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the die roll guide on the guide plate mold base four- pillar molding seat dimensions and markings. This section applies to rolling guide die mold base plate on the four guide pillar mold base.

GB/T 23564.4-2009: Die steel plate rolling die holder guide -- Part 4: Four die holder guide post

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Die steel plate rolling die holder guide Part 4. Four die holder guide post ICS 25.120.30 J46 National Standards of People's Republic of China Die rolling guide plate punch holder Part 4. Four die holder guide post Posted 2009-04-02 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23564 "die rolling guide plate punch holder" is divided into four parts. --- Part 1. rear side of the guide post mold base; --- Part 2. diagonal guide post mold base; --- Part 3. intermediate guide post mold base; --- Part 4. four guided column punch holder. This section GB/T Part of 423,564. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory Nanhai District of Foshan City, Guangdong-metal plastic mold Limited. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Liang Da Zhi, Feng double. Die rolling guide plate punch holder Part 4. Four die holder guide post

1 Scope

This section GB/T 23564 specifies the die roll on the guide plate mold base four guided column punch holder dimensions and markings. This section applies to the die roll on the guide plate mold base four-pillar guide die holder.

2 Normative references

The following documents contain provisions which, through reference GB/T 23564 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8050 Die mold technical conditions JB/T 8070-2008 die mold parts and technical conditions

3 Dimensions

Four guided rolling guide pillar mold base structure and dimensions shown in Figure 1, Table 1. Note. No Note the surface roughness R Rao 6.3μm. Figure 1 four rolling guide die holder guide post ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23564.4-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23564.4-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23564.4-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23564.4-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.