GB/T 23564.1-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23564.1-2009: Ball-bearing guide steel-plate punch holders of stamping dies -- Part 1: Rear-pillar punch holders
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23564.1-2009	139	Add to Cart	3 days	Ball-bearing guide steel-plate punch holders of stamping dies -- Part 1: Rear-pillar punch holders	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 23564.4   GB/T 23562.1   GB/T 23564.3   

Basic data

Standard ID: GB/T 23564.1-2009 (GB/T23564.1-2009)
Description (Translated English): Ball-bearing guide steel-plate punch holders of stamping dies -- Part 1: Rear-pillar punch holders
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 6,616
Date of Issue: 2009-04-02
Date of Implementation: 2010-01-01
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the die rolling guide plate on the rear side of the guide pillar mold mold base seat dimensions and markings. This section applies to die rolling guide plate on the rear seat mold guide pillar mold base.

GB/T 23564.1-2009: Ball-bearing guide steel-plate punch holders of stamping dies -- Part 1: Rear-pillar punch holders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ball-bearing guide steel-plate punch holders of stamping dies Part 1. Rear-pillar punch holders ICS 25.120.30 J46 National Standards of People's Republic of China Die rolling guide plate punch holder Part 1. The rear side of the guide post mold base Posted 2009-04-02 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23564 "die rolling guide plate punch holder" is divided into four parts. --- Part 1. rear side of the guide post mold base; --- Part 2. diagonal guide post mold base; --- Part 3. intermediate guide post mold base; --- Part 4. four guided column punch holder. This section GB/T 23564 Part 1. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory Nanhai District of Foshan City, Guangdong-metal plastic mold Limited. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Liang Da Zhi, Feng double. Die rolling guide plate punch holder Part 1. The rear side of the guide post mold base

1 Scope

This section GB/T 23564 specifies the die roll guide plate on the rear side of the guide pillar die mold base seat dimensions and markings. This section applies to the die roll guide plate on the rear side of the punch holder guide pillar die holder.

2 Normative references

The following documents contain provisions which, through reference GB/T 23564 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8050 Die mold technical conditions JB/T 8070-2008 die mold parts and technical conditions

3 Dimensions

Rolling guide the rear guide post mold base structure and dimensions shown in Figure 1, Table 1. Note. No Note the surface roughness R Rao 6.3μm. Lifting screw position size is determined by the manufacturer. Figure 1 rolling guide the rear guide post mold base ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23564.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23564.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23564.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23564.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.