GB/T 23563.2-2009 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23563.2-2009: Ball-bearing guide steel-plate die sets of stamping dies -- Part 2: Diagonal-pillar die sets
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23563.2-2009	279	Add to Cart	3 days	Ball-bearing guide steel-plate die sets of stamping dies -- Part 2: Diagonal-pillar die sets	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 23563.4   GB/T 23562.1   GB/T 23563.3   

Basic data

Standard ID: GB/T 23563.2-2009 (GB/T23563.2-2009)
Description (Translated English): Ball-bearing guide steel-plate die sets of stamping dies -- Part 2: Diagonal-pillar die sets
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 12,187
Date of Issue: 2009-04-02
Date of Implementation: 2010-01-01
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the die rolling guide plate mold mold diagonal pillar of sizes and markings. This section applies to die rolling guide plate mold diagonal pillar mold.

GB/T 23563.2-2009: Ball-bearing guide steel-plate die sets of stamping dies -- Part 2: Diagonal-pillar die sets

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Ball-bearing guide steel-plate die sets of stamping dies Part 2. Diagonal-pillar die sets ICS 25.120.30 J46 National Standards of People's Republic of China Steel mold die rolling guide Part 2. diagonal pillar sets Posted 2009-04-02 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23563 "rolling guide die steel mold" is divided into four parts. --- Part 1. the rear pillar sets; --- Part 2. diagonal pillar sets; --- Part 3. intermediate pillar sets; --- Part 4. 4 post mold. This is Part 2 GB/T 23563 of. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Zhenjiang Chuanshan mold factory, Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision molds standard Quasi Factory, Nanhai District of Foshan City, Guangdong-metal plastic mold Limited. The main drafters of this section. Qi Wei root, WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Liang Da Zhi, Feng double. Steel mold die rolling guide Part 2. diagonal pillar sets

1 Scope

GB/T 23563 provisions of this part of the guide plate mold die roll diagonal pillar sets of dimensions and markings. This section applies to the die roll guide plate mold diagonal pillar sets.

2 Normative references

The following documents contain provisions which, through reference GB/T 23563 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T in the 70.1 hexagon socket head cap screws GB/T 2861.2 Part 2 die guide. rolling guide pillar GB/T 2861.4 die guide Part 4. rolling guide bushings GB/T 2861.5 Part 5 die guides. Ball retainer GB/T 2861.6 Part 6 die guides. cylindrical helical compression spring GB/T Part 11 2861.11 die guide. plate GB/T 23564.2 die roll on the guide plate mold base - Part 2. diagonal guide post mold base GB/T 23562.2 lower die plate mold base - Part 2. diagonal pillar lower die JB/T 8050 Die mold technical conditions

3 Dimensions

Rolling guide diagonal pillar mold structure and dimensions shown in Figure 1, Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23563.2-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23563.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23563.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23563.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.