GB/T 23562.2-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23562.2-2009: Steel-plate die holders of stamping dies -- Part 2: Diagonal-pillar die holders
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23562.2-2009	139	Add to Cart	3 days	Steel-plate die holders of stamping dies -- Part 2: Diagonal-pillar die holders	Valid

Similar standards

GB/T 45677   GB/T 6110   JB/T 3943   GB/T 23562.4   GB/T 23563.1   GB/T 23562.3   

Basic data

Standard ID: GB/T 23562.2-2009 (GB/T23562.2-2009)
Description (Translated English): Steel-plate die holders of stamping dies -- Part 2: Diagonal-pillar die holders
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J46
Classification of International Standard: 25.120.30
Word Count Estimation: 6,671
Date of Issue: 2009-04-02
Date of Implementation: 2010-01-01
Quoted Standard: JB/T 8050; JB/T 8070-2008
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the lower die die steel diagonal pillar of the lower die sizes and markings. This section applies to die sliding guide and rolling guide plate lower die diagonal pillar lower die.

GB/T 23562.2-2009: Steel-plate die holders of stamping dies -- Part 2: Diagonal-pillar die holders

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Steel-plate die holders of stamping dies Part 2. Diagonal-pillar die holders ICS 25.120.30 J46 National Standards of People's Republic of China Lower die plate mold base Part 2. diagonal pillar lower die Posted 2009-04-02 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23562 "die lower die plate" is divided into four parts. --- Part 1. the rear pillar lower die; --- Part 2. diagonal pillar lower die; --- Part 3. Center pillar lower die; --- Part 4. 4 post lower die. This is Part 2 GB/T 23562 of. This part of the National Standardization Technical Committee mold (SAC/TC33) and focal points. This section is drafted. Guilin Institute of Electrical Science, Guilin University of Electronic Technology, Hangzhou Xiaoshan precision mold standard factory, Zhenjiang Chuanshan Mold factory Nanhai District of Foshan City, Guangdong-metal plastic mold Limited. The main drafters of this section. WENG Shi Zhen, Liao Wang Yi, Zhang Yuqin, Qi Wei root, Liang Da Zhi, Feng double. Lower die plate mold base Part 2. diagonal pillar lower die

1 Scope

This section GB/T 23562 specifies the lower die plate mold base diagonal pillar of the lower die sizes and markings. This section applies to the die guide plate sliding guide and rolling the die holder diagonal pillar lower die.

2 Normative references

The following documents contain provisions which, through reference GB/T 23562 in this section constitute provisions of this section. For dated references, All subsequent amendments (excluding corrections) or revisions do not apply to this section, however, encourage an agreement under this section Parties to study the latest versions of these documents. For undated reference documents, the latest versions apply to this section. JB/T 8050 Die mold technical conditions JB/T 8070-2008 die mold parts and technical conditions

3 Dimensions

Diagonal pillar lower die structure and dimensions shown in Figure 1, Table 1. Note. No Note the surface roughness R Rao 6.3μm. Figure 1 diagonal pillar mold base ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23562.2-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23562.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23562.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23562.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.