GB/T 23561.4-2009 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23561.4-2009: Methods for determining the physical and mechanical properties of coal and rock -- Part 4: Methods for calculating the porosity of coal and rock Status: Valid
Basic dataStandard ID: GB/T 23561.4-2009 (GB/T23561.4-2009)Description (Translated English): Methods for determining the physical and mechanical properties of coal and rock -- Part 4: Methods for calculating the porosity of coal and rock Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: D04 Classification of International Standard: 73.010 Word Count Estimation: 8,871 Date of Issue: 2009-04-08 Date of Implementation: 2009-12-01 Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the terms and definitions of coal and rock porosity calculated, coal and rock total porosity (ie, including the opening and closing pores in two parts) calculation, coal and rock effective porosity (ie open porosity) calculation. This section applies to the calculation of coal and rock porosity, which applies to calculate the effective porosity and water do not disintegrate specimen volume change does not occur. GB/T 23561.4-2009: Methods for determining the physical and mechanical properties of coal and rock -- Part 4: Methods for calculating the porosity of coal and rock---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. National Standards of People's Republic of China GB/T 23561.4-2009 Methods for determination of physical and mechanical properties of coal and rock Part 4.Calculation method of coal and rock porosity General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Issued by the Standardization Administration of China forewordGB/T 23561 "Methods for Determination of Physical and Mechanical Properties of Coal and Rock" is released by parts and is divided into 16 parts. --- Part 1.General provisions on sampling; --- Part 2.Determination of true density of coal and rock; --- Part 3.Determination method of coal and rock block density; --- Part 4.Calculation method of coal and rock porosity; --- Part 5.Determination of water absorption of coal and rock; --- Part 6.Coal and rock moisture content determination method; --- Part 7.Determination of uniaxial compressive strength and calculation method of softening coefficient; --- Part 8.Determination methods of coal and rock deformation parameters; --- Part 9.Coal and rock triaxial strength and deformation parameters determination method; --- Part 10.Determination of tensile strength of coal and rock; --- Part 11.Coal and rock shear test methods; --- Part 12.Determination method of coal firmness coefficient; --- Part 13.Determination method of coal and rock point load strength; --- Part 14.Method for determination of rock expansion rate; --- Part 15.Determination method of rock expansion stress; --- Part 16.Determination method of rock disintegration resistance index. This Part is Part 4 of GB/T 23561. Appendix A of this section is a normative appendix. This part is proposed and managed by China Coal Industry Association. This part is drafted by. Coal Research Institute Mining Design Research Branch and Coal Research Institute Detection Research Branch. The main drafters of this section. Qi Qingxin, Li Jiqing, Mao Debing, Fu Jingyu, Zhang Xueliang. GB/T 23561.4-2009 Methods for determination of physical and mechanical properties of coal and rock Part 4.Calculation method of coal and rock porosity1 ScopeThis part of GB/T 23561 specifies the terms and definitions for the calculation of coal and rock porosity, the total porosity of coal and rock (that is, including the opening The calculation method of coal and rock effective porosity (that is, open porosity). This part is applicable to the calculation of coal and rock porosity, and the calculation of effective porosity is applicable to the conditions that do not disintegrate when exposed to water and do not change in volume. of test pieces.2 Normative referencesThe terms in the following documents become the terms of this part through the reference of this part of GB/T 23561.All dated citations documents, all subsequent amendments (excluding errata content) or revisions do not apply to this section, however, it is encouraged to reach The parties to the agreement research the availability of the latest versions of these documents. For undated reference documents, the latest version applies to this part. GB/T 23561.2-2009 Determination of physical and mechanical properties of coal and rock Part 2.Determination of true density of coal and rock GB/T 23561.3-2009 Methods for Determination of Physical and Mechanical Properties of Coal and Rock Part 3.Determination of Density of Coal and Rock Blocks GB/T 23561.5-2009 Determination of physical and mechanical properties of coal and rock Part 5.Determination of water absorption of coal and rock3 Terms and DefinitionsThe following terms and definitions apply to this part of GB/T 23561.4 Calculation method of coal or rock total porosityCalculate the total porosity of coal or rock according to formula (1).5 Determination of coal or rock effective porositySince the value of effective porosity of coal or rock is equal to the value of forced (saturated) water absorption of coal or rock, it can be calculated according to GB/T 23561.5- 2009 to measure the forced water absorption q of coal or rock, then there is formula (2). ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23561.4-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23561.4-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23561.4-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23561.4-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
