GB/T 23539-2009 English PDF

US$149.00 · In stock
Delivery: <= 2 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23539-2009: Coated abrasives -- Flap wheels with shaft
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23539-2009	149	Add to Cart	2 days	Coated abrasives -- Flap wheels with shaft	Valid

Similar standards

GB/T 2493   GB/T 2480   GB/T 23541   GB/T 23538   GB/T 23536   GB/T 23537   

Basic data

Standard ID: GB/T 23539-2009 (GB/T23539-2009)
Description (Translated English): Coated abrasives -- Flap wheels with shaft
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J43
Classification of International Standard: 25.100.70
Word Count Estimation: 5,538
Date of Issue: 2009-04-23
Date of Implementation: 2009-12-01
Adopted Standard: ISO 3919-2005, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard provides a common wheel with shaft sizes and page limit deviations. This standard applies to use on hand-held grinding machines with shaft rounds.

GB/T 23539-2009: Coated abrasives -- Flap wheels with shaft

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coated abrasives. Flap wheels with shaft ICS 25.100.70 J43 National Standards of People's Republic of China Coated abrasives with wheel axis (ISO 3919.2005, MOD) Posted 2009-04-23 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 3919.2005 "Coated Abrasives spool wheel" (in English). This standard is based on ISO 3919.2005 redrafted. Because of the special needs and requirements of the development of industry standards at the time of adoption of this international standard has been modified. These technical differences with Vertical single-line identification in which they are involved in terms of margin. This standard ISO 3919.2005 The main technical differences are as follows. --- The shaft diameter tolerance h9 Sd to 0 ~ -0.10; --- Wheel diameter increases the size of 25mm; --- Wheel width increased by 25mm size. For ease of use, this standard also made the following editorial changes. --- "This International Standard" be replaced by "this standard"; --- Remove the foreword to international standards. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee Abrasives (SAC/TC139) centralized. This standard was drafted. Foshan Datang grinding Materials Co., Ltd. The main drafters. Zhang celebrate, Liu Jun Tian. Coated abrasives with wheel axis

1 Scope

This standard specifies the wheel axle with common dimensions and limit deviations. This standard is applicable for use on the handheld grinder with wheel axle.

2 Requirements

Figure 1 and Table 1. Figure 1 Table 1 spool wheel size in millimeters T ± 1 10152025304050 Sd -0.10 ± 3 25 - - - × - - - 30 × × × × - - - 40 - × × × × - - 3 or 6 50 - - × × × - - 60 - × × × × × - 80 - - - × × × × 30 or 40

3 Mark

Compliance with this standard content with a wheel axle should be marked as follows. a) "take-up spool wheel"; b) No product performance standards. GB/T 23539-2009; c) wheel diameter D, in millimeters; d) wheel width T, in millimeters; e) shaft diameter Sd, in millimeters; f) the free shaft length L, in millimeters. Example. diameter D = 60mm, width T = 20mm, shaft diameter Sd = 6mm, free length L = 30mm axle with wheel axle according to the following tag. Wheel axle with GB/T 23539-2009 60 × 20 × 6 × 30

4 Flag

Content with wheel axle shall be identified as follows. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23539-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23539-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 2 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23539-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23539-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.