GB/T 2348-2018 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 2348-2018: Fluid power systems and components -- Cylinder bores and piston rod diameters
Status: Valid

GB/T 2348: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 2348-2018	139	Add to Cart	3 days	Fluid power systems and components -- Cylinder bores and piston rod diameters	Valid
GB/T 2348-1993	279	Add to Cart	3 days	Fluid power systems and components. Cylinder bores andpiston rod diameters	Obsolete

Similar standards

GB/T 2351   GB/T 2350   GB/T 3766   

Basic data

Standard ID: GB/T 2348-2018 (GB/T2348-2018)
Description (Translated English): Fluid power systems and components -- Cylinder bores and piston rod diameters
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Classification of International Standard: 23.100.20
Word Count Estimation: 7,745
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Older Standard (superseded by this standard): GB/T 2348-1993
Quoted Standard: GB/T 321; GB/T 9094; GB/T 17446
Adopted Standard: ISO 3320-2013, MOD
Regulation (derived from): National Standard Announcement No. 17 of 2018
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the cylinder bore of the hydraulic cylinder and cylinder, the diameter of the piston rod and the ratio of the two chambers. This standard applies to hydraulic cylinders and cylinders in fluid transmission systems.

GB/T 2348-2018: Fluid power systems and components -- Cylinder bores and piston rod diameters

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Fluid power systems and components--Cylinder bores and piston rod diameters ICS 23.100.20 J20 National Standards of People's Republic of China Replace GB/T 2348-1993 Fluid drive system and component bore and piston rod diameter (ISO 3320.2013, Fluidpowersystemsandcomponents-Cylinderboresand Pistonroddiametersandarearatios-Metricseries, MOD) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 2348-1993 "Hydraulic and pneumatic systems and component cylinder inner diameter and piston rod outer diameter", and GB/T 2348- Compared with.1993, the main technical changes are as follows. ---"Cylinder inner diameter" was changed to "caliber diameter", "piston rod outer diameter" was changed to "piston rod diameter" (see Chapter 1, Chapter 4, Chapter 5,.1993 edition) Chapter 1, Chapter 2); --- Added normative references (see Chapter 2); --- Added terms and definitions (see Chapter 3); --- Added symbols and units (see Chapter 4); --- Added schematic diagram of cylinder diameter and piston rod diameter (see Figure 1); --- Increased cylinder diameter 60, removed the brackets of cylinder diameters 90, 140, 220, 280 (see Table 2, Table 1 of the.1993 edition); --- Increased piston rod diameters (30), (60), (120), 400, 450 (see Table 3, Table 2 of the.1993 edition); --- Increased the ratio of the two chambers (see Chapter 6); --- Added labeling instructions (see Chapter 7). This standard uses the redrafting method to modify the ISO 3320.2013 "fluid drive system and component bore and piston rod diameter and surface The product is more than a series of meters. The technical differences between this standard and ISO 3320.2013 and their reasons are as follows. ---About the normative reference documents, this standard has made technical adjustments to adapt to China's technical conditions, adjustments The situation is reflected in Chapter 2, “Regulatory Citations”, and the specific adjustments are as follows. ● Replace ISO 3 with GB/T 321 equivalent to the international standard; ● Replace ISO 6099 with GB/T 9094 equivalent to the international standard; ● Replace ISO 5598 with GB/T 17446, which is equivalent to the international standard. --- Cylinder diameters 90, 140, 220, 280 cancel the brackets to meet the actual production needs of China (see Table 2 and Table 4). ---ISO 3320.2013 Table 2 Note 1 and Note 2 are changed to paragraphs and notes, delete "should be used only for special occasions"; Table 3 Note 1 and Note 2 change For paragraphs and notes, delete "should be used only for special occasions". --- Increase the bore diameter 60 and the corresponding data (see Table 4). ---ISO 3320.2013 Formula 1 (1) and formula (2) are deleted in Chapter 4, adding "×10-2" to the unit conversion. (See Chapter 4). --- Remove the definition of area ratio in 6.1 of ISO 3320.2013, simplifying the contents of 6.2 and 6.3 in ISO 3320.2013. This standard also made the following editorial changes. --- Modified the standard name; --- The symbol is changed to italic (see Chapter 4, Chapter 5, Chapter 6). This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Hydraulic and Pneumatic Standardization Technical Committee (SAC/TC3). This standard was drafted. Xuzhou Xugong Hydraulic Parts Co., Ltd., Bosch Rexroth (Changzhou) Co., Ltd., Hefei Changyuan Hydraulic Co., Ltd. Company, Yangzhou Jiangdu Yongjian Co., Ltd., Jiangyin Hongteng Machinery Co., Ltd., Wuhan University of Science and Technology, Sichuan Changjiang Hydraulic Parts Co., Ltd. the company. The main drafters of this standard. Liu Qingjiao, Zhang Qingshan, Yao Hongxiang, Lin Hougen, Zhang Hongyi, Yu Yandong, Chen Xinyuan, Wang Dehua, Chen Wanyong. The previous versions of the standards replaced by this standard are. ---GB/T 2348-1980, GB/T 2348-1993. Fluid drive system and component bore and piston rod diameter

1 Scope

This standard specifies the cylinder bore of the hydraulic cylinder and cylinder, the diameter of the piston rod and the ratio of the two chambers. This standard applies to hydraulic cylinders and cylinders in fluid transmission systems.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 321 priority number and priority number system (GB/T 321-2005, ISO 3.1973, IDT) GB/T 9094 hydraulic cylinder cylinder installation size and installation type symbol (GB/T 9094-2006, ISO 6099.2001, IDT) GB/T 17446 fluid drive system and component vocabulary (GB/T 17446-2012, ISO 5598.2008, IDT)

3 Terms and definitions

The terms and definitions defined in GB/T 17446 apply to this document.

4 symbols and units

Symbols and units shall comply with the provisions of GB/T 9094, see Table 1. Table 1 Symbols and units Name symbol unit Bore diameter AL mm Piston rod diameter MM mm Rodless cavity effective area A1 cm2 Rod cavity effective area A2 cm2 Two cavity area ratio φ - among them. A1=πAL2×10-2/4 (1) A2=π(AL2-MM2)×10-2/4 (2) φ=A1/A2 (3)

5 size

5.1 The cylinder bore is shown in Figure 1. The specific values are shown in Table 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 2348-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 2348-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 2348-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 2348-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 2348-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2348-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.