GB/T 23460.1-2009 English PDF

US$139.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23460.1-2009: Test methods of ceramic glazes -- Part 1: Determination of fluidity behaviour -- Fusion flow test
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23460.1-2009	139	Add to Cart	3 days	Test methods of ceramic glazes -- Part 1: Determination of fluidity behaviour -- Fusion flow test	Valid

Similar standards

GB 25502   GB/T 23447   GB/T 23448   GB/T 23458   

Basic data

Standard ID: GB/T 23460.1-2009 (GB/T23460.1-2009)
Description (Translated English): Test methods of ceramic glazes -- Part 1: Determination of fluidity behaviour -- Fusion flow test
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Q31
Classification of International Standard: 81.060.10
Word Count Estimation: 6,617
Date of Issue: 2009-03-28
Date of Implementation: 2010-01-01
Adopted Standard: ISO 4534-1980, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.4 (Total No.144)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the high-temperature ceramic glaze melt fluidity test methods flow method. This section applies to building and sanitary ceramics and high-temperature ceramic glaze daily liquidity tests. This section is a relative method. According to the test results obtained in this section, only under the same experimental enamel glaze and the conditions of the reference test case was comparable.

GB/T 23460.1-2009: Test methods of ceramic glazes -- Part 1: Determination of fluidity behaviour -- Fusion flow test

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Test methods of ceramic glazes Part 1. Determination of fluidity behaviour Fusion flow test ICS 81.060.10 Q31 National Standards of People's Republic of China Ceramic glaze Performance Test Method Part 1. High-temperature flow test melt flow method (ISO 4534-1980 (E), Vitreousandporcelainenamels- Determinationoffluiditybehaviour-Fusionflowtest, MOD) Posted 2009-03-28 2010-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23460 "ceramic glazes performance test method" is currently divided into the following three parts. --- Part 1. High-temperature flow test melt flow method. --- Part 2. Thermal expansion coefficient test. --- Part 3. Color Burning Performance Test. This section GB/T Part of 123,460. The partial modification of the use of ISO 4534-1980 (E) "enamel and enamel - Determination of flow - a melt flow test" (in English). The main difference between this part and ISO 4534-1980 follows. --- Standard name "enamel and enamel - Determination of flow - a melt flow test" to "high temperature ceramic glaze melt fluidity test Flow method "; --- Deleted international standards foreword; --- The 1 "This International Standard specifies" this part of GB/T ×××× provision of high-temperature ceramic glaze flow was changed to " Test Method melt flow method. Under comparable "; --- Added "ceramic glazes, glazes and reference melt flow" is defined; --- According to the practical application of the industry and operating convenience, modify the support frame sample preparation methods and test samples; --- Based on actual operating experience, the maximum width measured at the bottom of the glaze modified to measure the maximum width of the root, and so calculate the width of the flow coefficient. This part is proposed by the China Building Materials Federation. This part of the National Building sanitary ceramics Standardization Technical Committee (SAC/TC249) centralized. This section is responsible for drafting. Guangdong Che-hung glaze Ltd. Sanshui, Guangdong Province Institute of Standardization. Participated in the drafting of this section. plumbing and sanitary ceramics National Product Quality Supervision and Inspection Center, Xianyang Ceramics Research and Design Institute, Guangdong million Hing Co. inorganic pigments. The main drafters of this section. Yin Hong, Linren Jun, Li Duo, Tsai years, Zhengyuan Yao, He guides Yan, Huang Jianping, who Thynne, Yang Yuanyuan, Leung flow Zhouzhan Ming, noble friendship. This section first release. Ceramic glaze Performance Test Method Part 1. High-temperature flow test melt flow method

1 Scope

This section GB/T 23460 specifies the high-temperature ceramic glaze melt fluidity test method flow method. This section applies to the building and sanitary ceramics and daily high temperature ceramic glaze flowability tests. This section is a relative method, according to test results obtained in this section only in the test and reference enamel glazes the conditions the same situation Under test conditions was comparable.

2 Terms and definitions

The following terms and definitions apply to this part of the GB/T 23460 of. 2.1 After processing refined, applied in the body surface of the glass layer or glass crystal mixed layer from the cover or decorative effect is formed by melting materials. 2.2 After the parties acknowledge and experiment with nature and glaze melting temperature range similar ceramic glaze, as per test purposes determine. 2.3 Glaze during melting viscous flow. 3 equipment, machinery and materials 3.1 mill pot, a ball mill, electronics, standard sieve. 3.2 steel ring. high 15mm, inner diameter of 15mm. 3.3 biscuit. size not less than 100mm × 100mm, deformation at test temperature. 3.4 Oven. hot air circulation, the maximum temperature of 300 ℃. 3.5 box-type furnace. Maximum temperature not lower than 1300 ℃. 3.6 45 ° tilt refractory bracket (see Figure 1). its dimensions a and b face surface is not less than 100mm × 100mm, 1400 ℃ high temperature resistance required Not deformed. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23460.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23460.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23460.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23460.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.