GB/T 23312.7-2009 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23312.7-2009: Enamelled round aluminium winding wire -- Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23312.7-2009	114	Add to Cart	3 days	Enamelled round aluminium winding wire -- Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200	Valid

Similar standards

GB/T 4074.21   GB/T 4074.3   GB/T 7095.1   GB/T 23312.3   GB/T 23312.4   GB/T 23312.2   

Basic data

Standard ID: GB/T 23312.7-2009 (GB/T23312.7-2009)
Description (Translated English): Enamelled round aluminium winding wire -- Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K12
Classification of International Standard: 29.060.10
Word Count Estimation: 6,689
Date of Issue: 2009-03-19
Date of Implementation: 2009-12-01
Adopted Standard: IEC 60317-25-1997, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 3, 2009 (No. 143 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the double paint layer 200 enamelled round aluminum wire requirements. Primer layer of polyester or polyester -imide resin-based, such as to retain the original chemical properties of the resin and meets all the requirements for enameled wire, the resin can be modified. Topcoat layer is made of polyamide-imide resin as the base. Note: The modified resin is a chemical change through, or contain one or more additives to improve their performance or the use of properties of a resin. 200 of the heat level, requires a minimum temperature index of 200, thermal shock temperature of at least 220��C. Corresponds to the temperature in Celsius temperature index is not recommended use temperature enameled wire, because it depends on factors including the type of equipment, including a number of factors. This section provides a nominal conductor diameter range: -1 Level: 0. 400mm and 3. 150mm above and below, -2 Grade: 0. 400mm and 5. 000mm above and below. Conductor nominal diameters see GB/T 23312. 1-2009 in Chapter 4.

GB/T 23312.7-2009: Enamelled round aluminium winding wire -- Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Enamelled round aluminium winding wire Part 7. Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 ICS 29.060.10 K12 National Standards of People's Republic of China GB/T 23312.7-2009/IEC 60317-25.1997 Enameled round aluminum winding wire Section 7.200 polyester or polyester-imide/polyamide Imide enamelled round aluminum wire (IEC 60317-25.1997, Specificationsforparticulartypesofwinding wires-Part 25. Polyesterorpolyesterimideovercoatedwith polyamide-imideenameledroundaluminiumwire, class200, IDT) Posted 2009-03-19 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 23312 "enamelled round aluminum winding wire" is divided into seven parts. --- Part 1. General requirements; --- Part 2. 120 acetal enamelled round aluminum wire; --- Part 3. Polyester enamelled round aluminum wire; --- Part 4. 155 polyester enameled round aluminum wire; --- Part 5. 180 polyester enamelled round aluminum wire; --- Part 6. 180 polyester or polyester-imide/polyamide composite enameled round aluminum wire; --- Part 7.200 polyester or polyester-imide/polyamide-imide enamelled round aluminum wire. This is Part 7 GB/T 23312 of. This section identical with IEC 60317-25.1997 "product standards of winding wires - Part 25. Polyester or polyesterimide 200 / Polyamide-imide enamelled round aluminum wire "2.2 version (in English). For ease of use, this section made the following editorial changes. --- Remove the foreword and introduction of international standards; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Increased by 3.2 "look and feel"; --- Increased Chapter 23, "pinhole" test. This part identical with IEC 60317-25.1997 "product standards of winding wires - Part 25.200 polyester or polyester Asia When the amine/polyamide-imide enamelled round aluminum wire, "amended several original editorial errors, which amended as follows. --- The Chapter 18 "thermal bonding and solvent bonding" with "thermal bonding." This part is proposed by the China Electrical Equipment Industrial Association. This part of the National Standardization Technical Committee Wire and Cable (SAC/TC213) centralized. This section is drafted. Shanghai Electric Cable Research Institute, Tongling fine Xun special enameled wire limited liability company, Foshan Electrical Sandwich Material Co., Secretary, Galanz (Zhongshan) Electrical Wire Co., Ltd. Wuxi Jufeng composite wires, Zhuji exposed laugh specialty lines, Ltd., Shanghai Yusheng Special Species Wire Co., Ltd., Xuzhou Bao Sheng Industrial Co., Ltd., Huang Yang Copper Co., Ltd., Tianjin and double metal wire Co., Ltd., Sea Chongming special Electromagnetic Wire Factory, Zhejiang first board Electrical Equipment Co., Ltd., Zhejiang Hongbo Cable Co., Ltd., Zhejiang Great Wall Electronics Division Technology Group, Zhejiang Honglei Copper Co., Ltd., Fuzhou Chase Electrical Co., Ltd. The main drafters of this section. Chen Hui-min, Shen Jun, Wang Huifeng, Lijing Kang, Cai Lin, Lu were small, Panlie Jun Yan Benjamin, the Yellow River, Zhang Chunlong, Huang Xiaodong, Mengxiang Fu, Cao Hengtai, Yao Guihua, Zhejiang Wei Qiang, Liu, Li Fu. This section first formulated. GB/T 23312.7-2009/IEC 60317-25.1997 Enameled round aluminum winding wire Section 7.200 polyester or polyester-imide/polyamide Imide enamelled round aluminum wire

1 Scope

This section GB/T 23312 200 specifies the requirements of enamelled round aluminum wire double coat of paint. A primer layer of polyester or polyester imide resin Based, chemical properties such as to retain the original resin and meet all the requirements of the provisions of enameled wire, the resin can be modified. Topcoat layer is poly Polyamideimide resin matrix. NOTE. chemically-modified resin is a variation of, or contain one or more additives to improve certain properties of the resin or its usage characteristics. 200 represents the thermal level, requires a minimum temperature index of 200, the thermal shock temperature of at least 220 ℃. Corresponding to the temperature index temperature in Celsius is not recommended wire temperature, because it depends on the type of equipment used include Many factors within. Conductor nominal diameter range specified in this standard are. --- Level 1. 0.400mm and 3.150mm above and below; --- Level 2. 0.400mm and 5.000mm above and below. Conductor nominal diameter see GB/T 23312.1-2009 in Chapter 4.

2 Normative references

The following documents contain provisions which, through reference GB/T 23312 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 23312.1-2009 enameled round aluminum winding wire - Part 1. General requirements (IEC 60317-0-3.2004, Specificationsfor particulartypesofwindingwires-Part0-3. Generalrequirements-Enameledroundaluminiumwire, IDT) 3 Definitions, test methods and General Appearance 3.1 Definitions, test methods - General General definitions and test methods see GB/T 23312.1-2009 in Chapter 3. If GB/T 23312.1-2009 in this section are contradictory to this section shall prevail. 3.2 Appearance See GB/T 23312.1-2009 Chapter 3.

4 Dimensions

See GB/T 23312.1-2009 in Chapter 4.

5 resistance

See GB/T 23312.1-2009 in Chapter 5.

6 Elongation

See GB/T 23312.1-2009 in Chapter 6. GB/T 23312.7-2009/IEC 60317-25.1997 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23312.7-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23312.7-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23312.7-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23312.7-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.