GB/T 23299-2009 English PDFUS$154.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 23299-2009: Ships and marine technology -- Hydrostatic release units Status: Valid
Basic dataStandard ID: GB/T 23299-2009 (GB/T23299-2009)Description (Translated English): Ships and marine technology -- Hydrostatic release units Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: U27 Classification of International Standard: 47.020.50 Word Count Estimation: 8,878 Date of Issue: 2009-03-09 Date of Implementation: 2009-11-01 Quoted Standard: ISO 9227-1990 Adopted Standard: ISO 15734-2001, IDT Regulation (derived from): National Standard Approval Announcement 2009 No.2 (Total No.142) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the free- floating with life-saving equipment (including inflatable liferaft and EPIRB, a short EPIRB) is connected to the hydrostatic release unit (referred to as the releaser, HRU) performance and test requirements. Compliance with this standard and has been approved by the competent authorities hydrostatic release unit, can be considered in line with the 1974 International Convention for the Safety of Life at Sea and the International Maritime Organization (IMO) life-saving equipment (LSA) rules. GB/T 23299-2009: Ships and marine technology -- Hydrostatic release units---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Ships and marine technology. Hydrostatic release units ICS 47.020.50 U27 National Standards of People's Republic of China GB/T 23299-2009/ISO 15734.2001 Ships and marine technology hydrostatic release unit (ISO 15734.2001, IDT) Posted 2009-03-09 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard is equivalent to using ISO 15734.2001 "Ships and marine technology hydrostatic release unit" (in English). This standard is equivalent translation ISO 15734.2001. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete international standards foreword. The standard proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee outfitting the ship lifesaving equipment Technical Committee (SAC/TC129/SC1) centralized. This standard was drafted. Technical and Economic Research Institute of China Shipbuilding Industry. The main drafters of this standard. Gao Feng, Wang Lei. GB/T 23299-2009/ISO 15734.2001 Ships and marine technology hydrostatic release unit1 ScopeThis standard specifies the formula connected with the free-floating life-saving equipment (including inflatable liferaft and EPIRB device, referred EPIRB) Then the hydrostatic release unit (referred to as the releaser, HRU) performance and test requirements. Compliance with this standard and has been recognized as the competent authorities of hydrostatic Pressure release, can be regarded as in line with 1974 International Convention for the Safety of Life at Sea and the International Maritime Organization (IMO) life-saving equipment (LSA) rule.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ISO 9227.1990 artificial atmosphere corrosion test salt spray test3 General requirements3.1 Manufacturing Hydrostatic release unit for survival craft EPIRB or free-floating equipment shall meet the following requirements. --- Should use appropriate means to avoid material failure; the coating is damaged may affect the performance of the device should not be used metal parts coating; --- Should have a drainage device, to avoid hydrostatic release unit when the water chamber in the hydrostatic normal working condition; --- Hand and cable means connected to each structural member should have a strength of not less than hand cable required; --- Hydrostatic release unit should be easy to replace or annual maintenance; --- Materials and components should be corrosion-resistant, not water, oil and detergents influence; --- After temperature cycling -30 ℃ ~ 65 ℃ can still work properly; --- Should be able to work within -1 ℃ ~ 30 ℃ seawater temperature range; --- Should be no more than 4m depth automatically released at the free-floating life-saving equipment; --- Under the impact of the sea should not be prematurely released. 3.2 mark Surface should be permanently marked in the following products. --- Manufacturer, type, serial number; ---Production Date; --- If the hydrostatic release unit is equipped with liferafts to have capacity constraints, liferaft shall be marked with the maximum capacity; --- If the hydrostatic release unit is disposable and should indicate the expiration date. Nameplate 3.3 Maintenance Record If the hydrostatic release annual maintenance needs, maintenance records should be fixed on its flag. 3.4 Operation and Maintenance Guide Operation and Maintenance Guide should be expressed in simple language and contains the following information. ---product description; ---Installation Guide; --- Shipping maintenance requirements; --- Maintenance requirements. GB/T 23299-2009/ISO 15734.2001 ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 23299-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 23299-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 23299-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 23299-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
