GB/T 23288-2023 English PDF

US$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23288-2023: General technical requirements for ligneous cinerary casket
Status: Valid

GB/T 23288: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23288-2023	269	Add to Cart	3 days	General technical requirements for ligneous cinerary casket	Valid
GB/T 23288-2009	319	Add to Cart	3 days	General technical requirements for ligneous cinerary caskets	Obsolete

Similar standards

GB/T 21737   GB/T 29632   GB/T 35966   GB/T 26354   GB/T 18760   

Basic data

Standard ID: GB/T 23288-2023 (GB/T23288-2023)
Description (Translated English): General technical requirements for ligneous cinerary casket
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: A12
Classification of International Standard: 13.030.40
Word Count Estimation: 14,152
Date of Issue: 2023-09-07
Date of Implementation: 2023-09-07
Older Standard (superseded by this standard): GB/T 23288-2009
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 23288-2023: General technical requirements for ligneous cinerary casket

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
ICS 13.030.40 CCSA12 National Standards of People's Republic of China Replace GB/T 23288-2009 General technical conditions for wooden urns Published on 2023-09-07 Implemented on 2023-09-07 State Administration for Market Regulation Released by the National Standardization Administration Committee

Table of contents

Preface III 1 Scope 1 2 Normative reference documents 1 3 Terms and Definitions 1 4 Requirements 2 4.1 Material 2 4.2 Operating environment conditions 3 4.3 Appearance 3 4.4 Size 3 4.5 Form and position tolerances 3 4.6 Usage performance 3 4.7 Physical and chemical properties 4 4.8 Limits of Hazardous Substances 4 5 Test method 4 5.1 Material 4 5.2 Operating environment conditions 5 5.3 Appearance 5 5.4 Size 5 5.5 Form and position tolerances 5 5.6 Usage performance 5 5.7 Physical and chemical properties 6 5.8 Limits of Hazardous Substances 6 6 Inspection Rules 6 6.1 Inspection Category 6 6.2 Factory inspection 6 6.3 Type inspection 6 6.4 Evaluation of inspection results7 6.5 Retest rules 7 7 logo 7 8 Packaging, transportation and storage7 8.1 Packaging 7 8.2 Transportation and storage7 Reference 8

Foreword

This document complies with the provisions of GB/T 1.1-2020 "Standardization Work Guidelines Part 1.Structure and Drafting Rules of Standardization Documents" Drafting. This document replaces GB/T 23288-2009 "General Technical Conditions for Wooden Urns". Compared with GB/T 23288-2009, except for the structure In addition to adjustments and editorial changes, the main technical changes are as follows. a) The terminology definitions of "wooden urn" and "box" have been changed (see 3.1, 3.5, 3.2, 3.9 of the.2009 version); b) The terms and definitions of “urn” and “blank” are deleted (see 3.1 and 3.6 of the.2009 edition); c) Added the terms and definitions of “main components of the urn”, “card strips”, “accessories” and “main materials” (see 3.11, 3.12, 3.13, 3.14); d) Changed material requirements (see 4.1, 4.5 of the.2009 version); e) Changed the performance requirements (see 4.6, 4.2 of the.2009 version); f) Added appearance, size, shape and position tolerance requirements (see 4.3, 4.4, 4.5); g) The physical and chemical performance requirements have been changed (see 4.7, 4.3 of the.2009 version); h) The process requirements, mechanical properties and specification requirements are deleted (see 4.6, 4.7 and 4.8 of the.2009 edition); i) Change "environmental protection requirements" to "hazardous substance limits" (see 4.8, 4.4 of the.2009 version); j) Added testing methods for materials and environmental conditions of use (see 5.1 and 5.2); k) The appearance inspection method has been changed (see 5.3, 5.1 of the.2009 version); l) The main dimensional measurements have been changed (see 5.4, 5.2 of the.2009 version); m) Added shape and position tolerance measurement methods (see 5.5); n) Changed the measurement method of service performance (see 5.6, 5.3 of the.2009 version); o) Changed the measurement method of physical and chemical properties (see 5.7, 5.5 of the.2009 version); p) Added the method for determining the limit of hazardous substances (see 5.8); q) Changed the "Inspection Rules" chapter (see Chapter 6, Chapter 6 of the.2009 edition); r) Added a chapter on "Identification" (see Chapter 7); s) Changed the "Packaging, Transportation and Storage" chapter (see Chapter 8, Chapter 7 of the.2009 edition). Please note that some content in this document may be subject to patents. The publisher of this document assumes no responsibility for identifying patents. This document is proposed by the Ministry of Civil Affairs of the People's Republic of China. This document is under the jurisdiction of the National Funeral Standardization Technical Committee (SAC/TC354). This document was drafted by. 101 Research Institute of the Ministry of Civil Affairs, Dongyang Fushan Woodcarving Co., Ltd., Shanxi Linyi Lacquer Craft Co., Ltd., Zhejiang Jiangsanmao Redwood Crafts Co., Ltd., China Funeral Association, Meishan Funeral Home, Zhejiang Academy of Forestry Sciences, Guangdong Tanlin Industrial Co., Ltd. Company, Tianjin Yufuxiang Life Culture International Group Co., Ltd. The main drafters of this document. Gao Yuan, Meng Hao, Sun Chenglong, Wang Yingchao, Fang Xiang, Du Chengsan, Zhang Yiping, Tian Lin, Guo Chan, Qian Gao, Mou Yu, Yong Guoxiang, Guo Lei, Li Bingjie, Li Yuguang, Fu Huiqun, Pan Xiangdang, Li Zhengang, Fang Chongrong, Wang Lizhuan, Huang Yu, Liu Kemin, Hou Jianping, Zhang Yongqiang, Lu Weihai, Liang Wei, Gou Yunfei, Cao Dong. The previous versions of this document and the documents it replaces are as follows. ---First published as GB/T 23288-2009 in.2009; ---This is the first revision. General technical conditions for wooden urns

1 Scope

This document specifies the requirements, inspection rules, marking, packaging, transportation and storage of wooden urns, and describes test methods. This document applies to the production, use and inspection of wooden urns.

2 Normative reference documents

The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, the dated quotations For undated referenced documents, only the version corresponding to that date applies to this document; for undated referenced documents, the latest version (including all amendments) applies to this document. GB/T 191 Packaging, storage and transportation pictorial mark GB/T 1927.4 Test methods for physical and mechanical properties of small defect-free wood specimens Part 4.Determination of moisture content GB/T 4893.2 Physical and chemical properties testing of furniture surface paint films - Part 2.Determination of moisture and heat resistance GB/T 4893.4 Physical and chemical properties testing of furniture surface paint films - Part 4.Adhesion cross-cutting determination method GB/T 4893.9 Physical and chemical properties testing of furniture surface paint films - Part 9.Impact resistance determination method GB 18584 Limits of Hazardous Substances in Wooden Furniture, Interior Decoration Materials GB/T 29894 General principles for wood identification methods

3 Terms and definitions

The following terms and definitions apply to this document. 3.1 A container made of logs or sawn wood as the main material for holding ashes. 3.2 singlecinerarycasket An urn containing the ashes of a body. 3.3 doublecinerarycasket An urn containing the ashes of two bodies in a joint burial. 3.4 volumecasketvolume The amount of space in the urn that can contain the ashes. 3.5 box box It is a component used to hold ashes and play a supporting and carrying role. 3.6 wallboard The wall panel of the urn box. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23288-2023_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23288-2023_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23288-2023_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23288-2023_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 23288-2023?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 23288-2023 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.