GB/T 23253-2009 English PDF

US$474.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23253-2009: Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23253-2009	474	Add to Cart	4 days	Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics	Valid

Similar standards

GB/T 20080   GB/T 25133   GB/T 20079   GB/T 38178.1   GB/T 22107   GB/T 23252   

Basic data

Standard ID: GB/T 23253-2009 (GB/T23253-2009)
Description (Translated English): Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J20
Classification of International Standard: 23.100.10
Word Count Estimation: 24,248
Date of Issue: 2009-03-16
Date of Implementation: 2009-11-01
Adopted Standard: ISO 17559-2003, IDT
Regulation (derived from): National Standard Approval Announcement 2009 No.2 (Total No.142)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies test methods for electronically controlled hydraulic pump (hereinafter referred to as the pump) steady-state and dynamic performance characteristics. Note: This standard relates only to the electronic control unit associated with the pump performance test methods. This standard pumps have involved changing the input electric signal proportional to the flow or pressure output function. These pumps can pump the load sensing control, servo control pump may be electrically controlled variable displacement pump. Measurement accuracy is divided into A, B, C three, detailed in Appendix A.

GB/T 23253-2009: Hydraulic fluid power -- Electrically controlled hydraulic pumps -- Test methods to determine performance characteristics

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Hydraulic fluid power. Electrically controlled hydraulic pumps. Test methods to determine performance characteristics ICS 23.100.10 J20 National Standards of People's Republic of China GB/T 23253-2009/ISO 17559.2003 Electronically controlled hydraulic drive pump performance test method (ISO 17559.2003, IDT) Posted 2009-03-16 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Symbols 2 5 test apparatus 2 6 Test conditions 2 7 Steady characteristic test 5 8 dynamic characteristics test 11 Appendix A (normative) Measurement accuracy Level 16 References 17 GB/T 23253-2009/ISO 17559.2003

Foreword

This standard is equivalent to using ISO 17559.2003 "electronically controlled hydraulic drive pump performance test method" (in English). This standard is equivalent translation ISO 17559.2003. For ease of use, this standard made the following editorial changes. --- Note the increase in the "Scope"; --- In the "normative references" in order to replace the corresponding national standards with international standards, increase ISO 1219-2; --- Flow units to L/min instead of dm3/min; --- Speed \u200b\u200bunits with r/min instead of min-1; --- 6.1.3 Oil Contamination Level in code-named "19/16" to "-/19/16." Appendix A of this standard is a normative appendix. The standard proposed by China Machinery Industry Federation. This standard by the National Standardization Technical Committee of hydraulic and pneumatic (SAC/TC3) centralized. This standard was drafted. Shanghai Branch of China Coal Research Institute, State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Guizhou force Liyuan Hydraulic AG. The main drafters of this standard. Xie Jiming, Qiumin Xiu, Yang Qiang, Huda Bang, Luode Gang, Wang Qingfeng, Zhao Yanping, Wugen Mao, Cao Jie, Hu Jun. GB/T 23253-2009/ISO 17559.2003

Introduction

This standard is intended to unify the various test methods for electronic control of the hydraulic pump, in order to compare the performance of different pump. This standard specifies the Test equipment, test procedures and test results of the expression of specific requirements. GB/T 23253-2009/ISO 17559.2003 Electronically controlled hydraulic drive pump performance test method

1 Scope

This standard specifies the test method for electronically controlled hydraulic pump (hereinafter referred to as the pump) steady-state and dynamic performance characteristics. Note. This standard is concerned only with the electronic control device related to pump performance test methods. Covered by this standard pumps have changed the input electrical signal proportional to the output flow or pressure functional. These pumps can be load Sensitive control pumps, servo-controlled pump, it can be electronically controlled variable displacement pump. Measurement accuracy is divided into A, B, C three, detailed in Appendix A.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 786.1 Fluid power systems and components - Graphic symbols and circuit diagram - Part 1. for general use and data processing of FIG. Symbol (GB/T 786.1-2009, ISO 1219-1.2006, IDT) GB/T 3141 Industrial liquid lubricants - ISO viscosity classification (GB/T 3141-1994, eqvISO 3448.1992) GB/T 14039-2002 Hydraulic fluid level of contamination by solid particles (ISO 4406.1999, MOD) GB/T 17446 Fluid power systems and components Terminology (GB/T 17446-1998, idtISO 5598. 1985) GB/T 17485 hydraulic pumps, motors and integral transmissions - Parameter definitions and letter symbols (GB/T 17485-1998, idtISO 4391. 1983) GB/T 17491 hydraulic pumps, motors and integral transmissions - Determination of steady-state performance (GB/T 17491-1998, idtISO 4409. 1986) ISO 1219-2 fluid power systems and components - Graphic symbols and circuit diagram - Part 2. Circuit diagram

3 Terms and Definitions

GB/T 17446 and established the following terms and definitions apply to this standard. 3.1 According to the variable input signals can pump controls the pump output pressure or flow. 3.2 To maintain maximum working pressure required minimum flow input command signal. 3.3 When the absolute value of the input command signal is zero pressure and flow command signal is the lowest maximum output pressure of the pump. 3.4 A working range of the pump. Within this working range, the absolute value of the input signal increases from zero or reduced to zero by the input signal Output pressure and output flow control number does not change. 3.5 Subjects range from the outlet of the pump to load the main line valve inlet, the total volume of working oil. GB/T 23253-2009/ISO 17559.2003 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23253-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23253-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23253-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23253-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.