GB/T 23241-2009 English PDF

US$559.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 23241-2009: Plastics pipes and fittings used for irrigation basic parameters and technical requirements
Status: Obsolete

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 23241-2009	559	Add to Cart	3 days	Plastics pipes and fittings used for irrigation basic parameters and technical requirements	Obsolete

Similar standards

GB/T 19472.1   GB/T 19472.2   GB/T 24456   GB/T 45332   GB/T 43982.11   GB/T 45331   

Basic data

Standard ID: GB/T 23241-2009 (GB/T23241-2009)
Description (Translated English): Plastics pipes and fittings used for irrigation basic parameters and technical requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G33
Classification of International Standard: 83.140.30
Word Count Estimation: 14,173
Date of Issue: 2009-02-13
Date of Implementation: 2009-05-01
Quoted Standard: GB/T 1033-1986; GB/T 1844.1; GB/T 2035; GB/T 6111-2003; GB/T 6671-2001; GB/T 7306.1-2000; GB/T 8801-2007; GB/T 8802-2001; GB/T 8803-2001; GB/T 8804.2-2003; GB/T 9113.1-2000; GB/T 9647-2003; GB/T 10002.1-2006; GB/T 10002.2-2003; GB/T 13663-2000; GB/T 14152-2001; GB/T 15560-1995; GB/T 15819-2006; GB/T 17391-1998; QB/T 1916-2004; QB/T 2782-2006
Regulation (derived from): National Standard Approval Announcement 2009 No.2 (Total No.142)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the polyvinyl chloride resin, polyethylene resin as the main raw material, extrusion molding with irrigation tubing (hereinafter referred to as the pipe) and the basic parameters and technical conditions supporting pipe fittings. This standard applies to the low-pressure pipe irrigation, distribution pipe network of micro sprinkler and drip irrigation and other projects, sprinkler.

GB/T 23241-2009: Plastics pipes and fittings used for irrigation basic parameters and technical requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Plastics pipes and fittings used for irrigation basic parameters and technical requirements ICS 83.140.30 G33 National Standards of People's Republic of China Irrigation plastic pipes and fittings Basic parameters and technical requirements Posted 2009-02-13 2009-05-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

The standard reference to the industry standard of low pressure water for irrigation, water supply and other plastic pipe and national standards, combined with our use of plastic irrigation Tubes and the production and actual use of pipe developed. This standard is proposed and administered by the People's Republic of China Ministry of Water Resources. This standard was drafted. China Irrigation and Drainage Development Center, China Institute of Water Resources and Hydropower, crown new pipe equipment Development Co., The company, Pipeline System Co., Ltd. Shandong wins state. The main drafters of this standard. Yao Bin, Liu Enwu, Lu Guangjiong, on behalf of Kai Yong, Liyan Ying, YU Ling, Zhao Qihui. Irrigation plastic pipes and fittings Basic parameters and technical requirements

1 Scope

This standard specifies the polyvinyl chloride resin, polyethylene resin as the main raw material, by extrusion molding with irrigation tubing (hereinafter referred to as tubes) And the basic parameters and technical conditions for supporting fittings. This standard applies to the low-pressure water supply pipe network pipe irrigation, sprinkler irrigation, micro-sprinkler and drip irrigation and other projects.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 23241-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 23241-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 23241-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 23241-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.