GB/T 22881-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22881-2008: Paper and board -- Determination of roughness/smoothness (air leak methods) -- General method
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22881-2008	189	Add to Cart	3 days	Paper and board -- Determination of roughness/smoothness (air leak methods) -- General method	Valid

Similar standards

GB/T 24328.3   GB/T 27741   GB/T 31905   GB/T 22877   GB/T 22873   GB/T 22872   

Basic data

Standard ID: GB/T 22881-2008 (GB/T22881-2008)
Description (Translated English): Paper and board -- Determination of roughness/smoothness (air leak methods) -- General method
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y30
Classification of International Standard: 85-010
Word Count Estimation: 8,813
Date of Issue: 2008-12-30
Date of Implementation: 2009-09-01
Adopted Standard: ISO 8791-1986, MOD
Regulation (derived from): National Standard Approval Announcement 2008 No.25 (Total No.138)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the determination of paper and cardboard roughness (smoothness) of the basic requirements and procedures with air leakage method. This standard applies to most paper and cardboard, but not for embossed paper, crepe paper or under test conditions can not pave the paper, and make a lot of air flow through the high permeability of the sheet of paper. Note: Gurley is measured by surface leakage between adjacent air sample, it is not included in this standard.

GB/T 22881-2008: Paper and board -- Determination of roughness/smoothness (air leak methods) -- General method

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Paper and board. Determination of roughness/smoothness (air leak methods). General method ICS 85-010 Y30 National Standards of People's Republic of China Paper and cardboard roughness (smoothness) of (Air leak methods) - General method [ISO 8791-1. 1986, Paperandboard-Determinationofroughness/smoothness (Airleakmethods) -Part 1. Generalmethod, MOD] Posted 2008-12-30 2009-09-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This revised standard adopts ISO 8791-1. 1986 Determination of "paper and paperboard roughness/smoothness (air leak methods) - Part 1. pass Method. " This standard and ISO 8791-1. 1986 as compared to the main differences are as follows. --- International Standard ISO document standard will be referenced in the normative references converted to its corresponding national standard, GB/T 450 paper and cardboard to take samples and specimens to the vertical and horizontal, positive and negative determination (GB/T 450-2008, ISO 186.2002, MOD); --- Normative references to international standards in the document will be converted to ISO standards referenced with the corresponding national standards, That GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187.1990). The standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of the paper industry. This standard is mainly drafted by. Sichuan Changjiang Paper Instrument Co., Ltd., China Pulp and Paper Research Institute, the national paper quality supervision Inspection Center. The main drafters of this standard. Yin Primula. Paper and cardboard roughness (smoothness) of (Air leak methods) - General method

1 Scope

This standard specifies the determination of paper and paperboard roughness (smoothness) of the basic requirements and procedures for air leakage method. This standard applies to most paper and board, but not for embossed paper, crepe paper or under the test conditions can not pave the paper, and can Passing through the high air permeability of the sheet of paper a lot of airflow. NOTE. Gurley is measured by surface leakage between adjacent air sample, it is not included in this standard.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 450 and take samples to an aspect of paper and paperboard samples, positive and negative determination (GB/T 450-2008, ISO 186. 2002, MOD) GB/T 10739 paper, paperboard and pulp sample processing and testing standard atmospheric conditions (GB/T 10739-2002, eqv ISO 187. 1990)

3 Terms and Definitions

The following terms and definitions apply to this standard. 3.1 Under test conditions, the air leakage rate from the time between the plane and the sample through the function specified. If the value increases show an increased roughness, the performance called roughness. Bent students, both Parker and Sheffield roughness test example of. If the value increases show an increased degree of smoothing, the performance called smoothness. Buick test is an example of smoothness. Shows the test results of the unit depends on the equipment, but most of the roughness of the test unit was milliliters per minute, the smoothness test Seconds. Parker printing surface analyzer exception roughness expressed in microns. Principle 4 The sample is placed between a smooth plate and a smooth circular probe. The measuring head side pressure is generally atmospheric pressure, The other side of the pressure can be adjusted to achieve a predetermined pressure differential. Under the specified test conditions, the air velocity through the probe and the sample surface between To measure the roughness of the sample (smoothness).

5 Instruments

The instrument shall comply with the provisions of the corresponding test methods detailed standards and should meet the following basic conditions. a) determination of the accuracy of the air leakage rate should reach ± \u200b\u200b5% of the measured value; or b) determining the accuracy of the volume should reach the measured value ± 2%, and (or) the accuracy of measuring time should reach ± \u200b\u200b1% of the measured value. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22881-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22881-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22881-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22881-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.