GB/T 22868-2008 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22868-2008: Basketball
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22868-2008	279	Add to Cart	3 days	Basketball	Valid

Similar standards

GB/T 22048   SN/T 0869   GB/T 22788   GB/T 44700   GB/Z 44858   GB/T 44458.3   

Basic data

Standard ID: GB/T 22868-2008 (GB/T22868-2008)
Description (Translated English): Basketball
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: Y56
Classification of International Standard: 59.140.35
Word Count Estimation: 12,163
Date of Issue: 2008-12-30
Date of Implementation: 2009-09-01
Quoted Standard: GB/T 2828.1-2003; GB/T 14625.1; GB/T 14625.2; GB/T 14625.3; GB/T 14625.4-2008; GB/T 14625.5; GB 20400; GB 21550; QB/T 1646-2007
Regulation (derived from): National Standard Approval Announcement 2008 No.25 (Total No.138)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the basketball product categories, requirements, test methods, inspection rules, signs, labels, packaging, transport and storage. This standard applies to all kinds of materials with basketball competitions, daily activities with basketball.

GB/T 22868-2008: Basketball

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Basketball ICS 59.140.35 Y56 National Standards of People's Republic of China GB/T 22868-2008 basketball Released on.2008-12-30 2009-09-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China China National Standardization Administration issued

Foreword

This standard is formulated with reference to the FIBA Basketball Competition Rules. This standard was proposed by the China Light Industry Association. This standard is under the jurisdiction of the National Leather Industry Standardization Technical Committee (SAC/TC252). This standard was drafted. Guangzhou Hailesi Ball Manufacturing Co., Ltd., National Sports General Administration Equipment and Equipment Center, China Leather and Shoemaker Industry Research Institute, Yantai Wanhua Microfiber Co., Ltd., Yusong (Kunshan) Sporting Goods Co., Ltd., High-speed Railway Testing Instruments (Dongguan) Co., Ltd. The main drafters of this standard. Korea Chun, Li Ge, Zhong Yaoqiang, Chen Jingchang. GB/T 22868-2008 basketball

1 Scope

This standard specifies the product classification, requirements, test methods, inspection rules, signs, labels, packaging, transportation and storage of basketball. This standard applies to basketball for daily use and basketball for daily activities made of various materials.

2 Normative references

The terms in the following documents become the terms of this standard by reference to this standard. All dated references, followed by all Modifications (not including errata content) or revisions do not apply to this standard, however, parties to agreements based on this standard are encouraged to study Is it possible to use the latest version of these files? For undated references, the latest edition applies to this standard. GB/T 2828.1-2003 - Sampling procedures for sampling by sampling - Part 1 . Batch-to-batch inspections by Retrieving Quality of Acceptance (AQL) plan GB/T 14625.1 Basketball, football, volleyball, handball test methods - Part 1 GB/T 14625.2 Basketball, football, volleyball, handball test methods - Part 2 GB/T 14625.3 Basketball, football, volleyball, handball test methods - Part 3. Dynamic impact test method GB/T 14625.4-2008 Basketball, football, volleyball, handball test methods - Part 4. Test conditions and sample preparation GB/T 14625.5 Basketball, football, volleyball, handball test methods - Part 5 GB 20400 Leather and fur hazardous substances limited GB 21550 PVC artificial leather harmful substances limited QB/T 1646-2007 polyurethane synthetic leather

3 Product Categories

3.1 by surface layer material 3.1.1 Class A. Leather ball. 3.1.2 Class B. artificial leather, synthetic leather, recycled leather ball. 3.1.3 Class C. Rubber ball. 3.2 by purpose 3.2.1 Basketball for competition (level 1). 3.2.2 Basketball for competition (secondary). 3.2.3 Basketball for daily activities. 3.3 According to the circumference of the use of the crowd and the ball 3.3.1 Men's Adult Basketball (No. 7), Women's Adult Basketball (No. 6). 3.3.2 Junior Basketball (No. 5). 3.3.3 Children's Basketball (No. 3).

4 device

4.1 Balance, accuracy 1g. 4.2 Metal or fiber tape, steel ruler, minimum scale 0.5mm. 4.3 Vernier caliper with an accuracy of 0.01mm. 4.4 Barometer, the range is 0 ~ 0.16MPa, the accuracy is 1.5, the minimum scale is 0.0025MPa. GB/T 22868-2008

5 requirements

5.1 Raw materials According to the relevant product standards, the limit value of hazardous materials for leather and recycled leather surface materials shall comply with the provisions of GB 20400 and Table 1. The limit of harmful substances of PVC artificial leather surface materials shall comply with the provisions of GB 21550 and Table 2, with single-component fibers and island-shaped braids. The polyurethane synthetic leather produced by the wet and dry composite of the fiber and the ultrafine fiber based nonwoven fabric and the polyurethane shall comply with the provisions of Table 3. Table 1 Limits of harmful substances in leather and recycled leather Project limit value Decomposable harmful aromatic amine dye/(mg/kg) ≤ 30 Free formaldehyde/(mg/kg) ≤ 75 Note. See GB 20400 for the name of the banned aromatic amine. If the content of 4-aminobiphenyl and/or 2-naphthylamine exceeds 30 mg/kg and there is no other evidence, Existing scientific knowledge is not yet determined to use banned azo dyes. Table 2 Limits of hazardous substances in PVC artificial leather Project limit value Vinyl chloride monomer/(mg/kg) ≤ 5 Soluble lead/(mg/kg) ≤ 90 Soluble cadmium/(mg/kg) ≤ 75 Other volatiles/(g/m2) ≤ 20 Table 3 Requirements for polyurethane synthetic leather for ball Project indicator Thickness/mm ≥ 0.8 Apparent density/(g/cm3) ≤ 0.6 Tensile load/N ≥ 50 Elongation at break /% ≥20 Tearing load/N ≥ 30 Peeling load/(N/2cm) ≥ 30 Surface color fastness/grade Dry friction ≥4 Wet friction ≥3 Sweat friction ≥ 3 5.2 Appearance quality It should meet the requirements of Table 4. GB/T 22868-2008 Table 4 Appearance quality Category appearance quality Competition basketball (level 1) a) The leather leather is firm, full and soft, the skin is fine, the texture is close, the surface is free of cracks, and the area of each ball is allowed. 2 minor defects of ≤6mm2; b) The artificial leather, synthetic leather and recycled leather have clear surface pattern and uniform depth, and no defects such as impurities, pinholes, bubbles and delamination are allowed; c) rubber spheres are not allowed to have impurities or creases, allowing cumulative spherical defects ≤ 3cm2; d) the width of the spherical joint or groove. leather ball ≤ 6.35mm, other balls ≤ 7.50mm; e) The rubber stem is straight, no sulfur and sulfur is excessive; the ball is flat and the stem is ≤ 1mm; f) The pattern and font are clear and correct. Competition basketball (secondary) a) The leather is solid, the skin is slightly loose, the texture is close, and the surface is free of cracks. Each ball can be allowed to have a slight area of ≤10mm2. 3 defects; b) Artificial leather, synthetic leather and recycled leather have clear surface pattern and uniform depth, and no impurities, pinholes, bubbles, delamination, etc. are allowed. Sinking, allowing for slight creases, allowing for 3 minor defects with an area of ≤ 5mm2; c) No bubbles or impurities are allowed on the rubber spherical surface; slight creases are allowed, and the cumulative spherical defect is allowed to be ≤5cm2; d) The ball is flattened, the width of the spherical joint or groove. leather ball ≤ 6.35mm, other balls ≤ 7.50mm; e) The rubber stem is straight, allowing for 2 defects with a depth not exceeding 30% of the leather and ≤ 3mm; f) The pattern and font are clear and correct. Daily activities with basketball a) The leather leather is soft and the skin is thicker, allowing slight defects that do not affect the use; b) The surface pattern of artificial leather, synthetic leather and recycled leather is basically clear, no defects such as bubbles and delamination are allowed, and slight folds are allowed. Traces, allowing 5 minor defects with an area of ≤ 5mm2; c) rubber spherical bubbles, impurities can be repaired intact; crease depth can be ≤0.5mm, allowing cumulative spherical defects ≤7cm2; d) the ball is flattened, the width of the spherical joint or groove is ≤7.5mm; e) the rubber stem is straight and no stalk is allowed; f) The pattern and font are basically clear and correct. 5.3 Quality Should comply with the provisions of Table 5. Table 5 mass unit is gram Product name quality Basketball for daily use in competition Class A, Class B, Class C, Class B, Class C Men's adult basketball 7 567 ~ 650 560 ~ 650 567 ~ 665 560 ~ 665 Women's adult basketball 6 510 ~ 567 510 ~ 567 510 ~ 580 510 ~ 615 Junior basketball 5 480 ~ 500 465 ~ 535 465 ~ 535 460 ~ 535 Children's Basketball 3 - - 280～360 280～360 5.4 circumference length, circumference difference Should comply with the provisions of Table 6. GB/T 22868-2008 Table 6 circumference length, circumference difference unit is mm Product name ball circumference Circumference Basketball for competition (level 1) Basketball for competition (secondary) Basketball for daily activities Men's adult basketball 7 749~780 Women's adult basketball 6 724 ~ 737 Junior Basketball 5 680～700 Children's basketball 3 555 ~ 580 ≤3 ≤4 - - ≤5 5.5 roundness Basketball for daily activities is not tested. The roundness of competition basketball (No. 7, No. 6, No. 5) shall comply with the requirements of Table 7. Table 7 Roundness project Roundness Basketball for daily use in competition Maximum radius difference /% ≤ 1.5 - 5.6 air tightness After the ball is inflated for 24h, the air pressure drop should meet the requirements of Table 8. Table 8 air tightness project Air tightness Basketball for competition (level 1) Basketball for competition (secondary) Basketball for daily activities Air pressure drop tolerance /% ≤ 4 6 15 5.7 rebound height Should comply with the provisions of Table 9. Table 9 rebound height in millimeters Product name Rebound height Basketball for daily use in competition Class A, Class B, Class C, Class A, Class B, Class C Adult men's basketball 7 1200 ~ 1400 1150 ~ 1450 Adult Women's Basketball 6 1200 ~ 1400 1150 ~ 1450 Junior Basketball 5 1000～1400 1000～1400 Children's basketball 3 - 1000 ~ 1400 ≥1000 5.8 Impact resistance Basketball No. 5 and No. 3 are not tested. The impact resistance of adult basketball (No. 7 and No. 6) should meet the requirements of Table 10. Table 10 Impact resistance project Impact resistance Basketball for competition (level 1) Basketball for competition (secondary) Basketball for daily activities Number of impacts/times 8000 5000 1000 Expansion rate after impact ≤ 1.03 1.03 1.03 Deformation value after impact/mm ≤ 3 3 3 Ball internal pressure drop rate after impact /% ≤ 6 8 12 After the impact, the appearance of the ball is free from cracks, implosion, peeling, degumming, wire breakage and deformation. GB/T 22868-2008 5.9 Heat resistance After the heat resistance test, the appearance of the ball is free from cracking, implosion, peeling, degumming, wire breakage and deformation. Note. This item is checked when the user has heat resistance requirements.

6 Test methods

6.1 Raw materials Before processing and production, the inspection shall be carried out according to the standards of GB 20400, GB 21550, QB/T 1646-2007 and so on. 6.2 Test conditions and preparation of samples Should comply with the provisions of GB/T 14625.4-2008. 6.3 Appearance quality Measured with a visual, sensory and steel ruler, vernier caliper in a well-lit environment with a viewing distance of 300 mm. 6.4 Quality The balance is weighed using a balance. 6.5 circumference length, circumference difference Inspection according to GB/T 14625.5. 6.6 roundness Test according to GB/T 14625.1. 6.7 Air tightness After inflating the ball to the specified in Table 1 of GB/T 14625.4-2008, it is allowed to stand at 23 °C ± 2 °C for 24 h, and the pressure of the ball is measured. Percentage reduction. 6.8 rebound height Test according to GB/T 14625.2. 6.9 Impact resistance Inspection according to GB/T 14625.3. 6.10 Heat resistance Place the ball in the aging box, heat up to 70 ° C, constant temperature for 48 h, remove and park for 4 h, check the appearance, which should meet the requirements of 5.9.

7 Inspection rules

7.1 batch The same variety and the same specification products produced by the same production process are used to form an inspection lot. 7.2 Factory inspection The product shall be inspected before leaving the factory, and passed the inspection and is accompanied by a qualified mark (or inspection mark) before leaving the factory. 7.3 Type inspection 7.3.1 Inspection cycle Type inspection should be carried out in any of the following cases. a) When there is a major change in product structure, process or materials; b) when the product resumes production after a long-term shutdown (six months); c) when the national quality and technical supervision agency proposes to carry out type inspection; d) At the time of normal production, the type inspection shall be carried out at least once every six months. 7.3.2 Number of samples Three samples are randomly selected from the products that have passed the factory inspection (for testing the heat resistance, three other tests should be taken). GB/T 22868-2008 7.3.3 Qualification judgment 7.3.3.1 Single decision rule 7.3.3.1.1 Basketball for competition (Level 1). If all the indicators are qualified, the product is judged to be qualified. 7.3.3.1.2 Basketball for competition (secondary). quality, circumference, circumference difference, roundness, air tightness, rebound height and impact resistance are all qualified. If the appearance is allowed to have minor defects that do not affect the use, the product is judged to be qualified. 7.3.3.1.3 Basketball for daily activities. circumference length, circumference difference, air tightness, rebound height are all qualified, and other items are allowed to have two disagreements. The grid is judged to be qualified. 7.3.3.2 Batch Determination Rules If all the three tested samples are qualified, the batch is judged to be qualified. If one (and above) is unqualified, double sampling and six retests are not acceptable Grid item. The reinspection rules are as follows. ---Basketball for competition (Level 1). If all the six retest samples are qualified, the batch of products will be qualified; if one sample is unqualified, it can be judged. The batch of products is for competition basketball (secondary); ---Basketball for competition (secondary), basketball for daily activities. If one of the six retest samples is allowed to fail, the batch is qualified. 7.4 Arbitration inspection The sampling shall be carried out according to the normal inspection sampling plan of GB/T 2828.1-2003, and the AQL value of the appearance project shall be determined to be 6.5. The AQL value is 2.5. 8 Marking, labeling, packaging, transportation and storage 8.1 mark 8.1.1 The products that have passed the inspection shall have the following marks. Name of production unit (distribution unit), address of production unit, trademark, product certificate (or inspection mark), contact telephone number, product use (dimensional Care and maintenance) instructions. 8.1.2 When necessary, the product packaging shall include the product name, item number, color, quantity, storage and transportation (protection) marking and other signs. 8.2 Label The product label should include the following contents. product name, product standard number, specification (ball number), item number, material (surface material), qualified (inspection) Logo. 8.3 Packaging The inner and outer packaging of the product should be made of suitable packaging materials to prevent damage to the product. 8.4 Transportation and storage 8.4.1 Prevent exposure, rain and snow. 8.4.2 Keep the ventilation and dry, do not stress, avoid high temperature environment. 8.4.3 Keep away from chemicals. GB/T 22868-2008 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22868-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22868-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22868-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22868-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.