GB/T 22846-2009 English PDFUS$139.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22846-2009: Test methods of four points system for visually inspecting knitted fabrics Status: Valid
Basic dataStandard ID: GB/T 22846-2009 (GB/T22846-2009)Description (Translated English): Test methods of four points system for visually inspecting knitted fabrics Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: W62 Classification of International Standard: 59.080.30 Word Count Estimation: 6,693 Date of Issue: 2009-04-21 Date of Implementation: 2009-12-01 Quoted Standard: GB/T 250; GB/T 4667; GB/T 8170; GB/T 14801; FZ/T 70003 Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the quality of the knitted fabric appearance inspection method-a quarter system test method. This standard applies to warp and weft knitted fabrics, not including wool and silk knitted fabrics knitted fabrics. GB/T 22846-2009: Test methods of four points system for visually inspecting knitted fabrics---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Test methods of four points system for visually inspecting knitted fabrics ICS 59.080.30 W62 National Standards of People's Republic of China Knitted fabrics (four-point) visual inspection Posted 2009-04-21 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China Textile Industry Association. This standard by the National Standardization Technical Committee Textile knitwear division Technical Committee (SAC/TC209/SC6). This standard was drafted. Fujian Fengzhu Technology Co., Ltd., Shandong Province Fiber Inspection Bureau, Guangdong Esquel Textile Co., Ltd., the country Home Knitting Product Quality Supervision and Inspection Center. The main drafters of this standard. often to the truth, Fan Rong, Liu Yonggui, high Zhang, Xing Zhigui. Knitted fabrics (four-point) visual inspection1 ScopeThis standard specifies the knitted fabric appearance quality inspection method --- four-point test. This standard applies to warp and weft knitted fabrics, knitted fabrics do not include wool and silk knitted fabrics.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 250 textile color fastness test assessing change in color like the gray card Determination of GB/T 4667 Woven fabrics of width GB/T 8170 repair value expressed about the rules and limit values \u200b\u200band judgment GB/T 14801 woven and knitted skew and bowing Test Method FZ/T 70004 Textiles knitted term defect3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 No matter how much the size and number of defects, vertical range up to full size within 1m count 4 points. 3.2 A column or a yarn needle or width of 1mm or less and defect in. 3.3 Linear defects than defects. 3.4 Cut off more than a yarn or fabric structure and incomplete defects. 3.5 In the local area, we can significantly observed defects. 3.6 It is difficult to count, is not easy to gauge the amount of dispersion defects and defects through horses. 3.7 Significantly affect the appearance of disseminated defects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22846-2009_English be delivered?Answer: Upon your order, we will start to translate GB/T 22846-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22846-2009_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22846-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |