GB/T 22764.4-2008 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22764.4-2008: Cabinets for low-voltage switchgear -- Part 4: Electrical safety requirements
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22764.4-2008	189	Add to Cart	3 days	Cabinets for low-voltage switchgear -- Part 4: Electrical safety requirements	Valid

Similar standards

GB/T 30137   NB/T 10613   GB/T 20877   GB/T 22764.3   GB/T 22764.5   GB/T 22764.2   

Basic data

Standard ID: GB/T 22764.4-2008 (GB/T22764.4-2008)
Description (Translated English): Cabinets for low-voltage switchgear -- Part 4: Electrical safety requirements
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K05
Classification of International Standard: 31.240
Word Count Estimation: 8,832
Date of Issue: 2008-12-30
Date of Implementation: 2009-10-01
Older Standard (superseded by this standard): JB/T 10324-2002; JB/T 6753.1-1993; JB/T 6753.2-1993; JB/T 6753.3-1993; JB/T 6753.4-1993; JB/T 6753.5-1993; JB/T 8678-1998
Quoted Standard: GB 7251.1; GB 4208
Regulation (derived from): Announcement of Newly Approved National Standards No. 24 of 2008 (No. 137 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the low voltage cabinet design, requirements, protecting electrical circuit continuity and enclosure protection (IP code). This section applies to low voltage cabinet (hereinafter referred to as products).

GB/T 22764.4-2008: Cabinets for low-voltage switchgear -- Part 4: Electrical safety requirements

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cabinets for low-voltage switchgear Part 4. Electrical safety requirements ICS 31.240 K05 National Standards of People's Republic of China Low voltage cabinet - Part 4. Electrical safety requirements Posted 2008-12-30 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 22764 "Low Voltage Cabinet" is divided into five sections. --- Part 1. Generic specification; --- Part 2. Dimensions Series; --- Part 3. Climate and Environment; --- Part 4. Electrical safety requirements; --- Part 5. Basic test methods. This section GB/T Part of 422,764. This section should be used with other portions. This part of the electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points. This section is responsible for drafting unit. million-controlled Group Co., Ltd., Zhangjiagang City Tianyi Electric Co., Ltd. Complete structure. Participated in the drafting of this section. Wuhan-source structure Electric Co., Zhangjiagang City days more Electric Co., Ltd., Tianjin original cabinet has Ltd., Jiangsu Tianxiang Electric Co., Ltd. in Hong Kong cabinet Jiangsu days, China Zhenhong Electric Co., Ltd. Cixi Qi State Electric Co. Division, Wenzhou City Electric Co., locks and Italy. The main drafters of this section. high Zhong Xi Luo Xuecheng. The drafters of some of the participants. Songzong Xiang, Zhao Jianming, with Shen Zhang, Zhong Jie, Tang Zhijian, Wu Chun Lin, Jiang Guoqing, Pan Zhengdong. Low voltage cabinet - Part 4. Electrical safety requirements

1 Scope

This section provides low voltage cabinet design, requirements, protection of electrical continuity and protection provided by enclosures (IP code) circuit. This section applies to low-voltage cabinet (hereinafter referred to as the product).

2 Normative references

The following documents contain provisions which, through reference GB/T 22764 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB 7251.1 Low-voltage switchgear and control equipment Part 1. Type - tested and partially type-tested assemblies (GB 7251.1-2005, idt IEC 60439-1.1999) GB 4208 housing protection (IP Code) (GB 4208-2008, IEC 60529.2001, IDT)

3 Design

3.1 Overview Electrical safety designed primarily to prevent the risk of two types. ---electric shock; --- Burns due to high temperature may be caused by fire and other harmful effects. Therefore, the basic principles of security is protection against electric shock and thermal effects protection, electric shock protection can be applied to the product, but also can be used in production Product or part of a device. Electrical safety design generally consists of low-voltage and low-voltage cabinet manufacturer of complete sets of equipment manufacturers together. 3.2 direct contact with the protection of design requirements Direct contact protection design should meet the dangers and livestock that may occur in contact with live parts of electrical installations should be protected. This One kind of protection obtained by the following method. --- Prevent current from any human or animal body by; --- Can limit the current through the body, so that it is lower than current shock. 3.3 indirect contact protection design requirements Indirect contact hazard protection should be designed to meet the humans and livestock in case of failure of the contact with the exposed conductive parts that may arise should the anti Protection. One of the following methods can be used to obtain this protection. --- Prevent fault currents from any person or animal body by; --- Limit fault current through the body to a value lower than the shock current; --- In case of failure, when a person or animal by touching the exposed conductive parts which may result in a value equal to or greater than the current shock The current through the body within a specified time automatically cut off power supply. 3.4 Protection against thermal effects of the design requirements Protection against thermal effects should be designed to meet the product is not dangerous due to high temperature or electric arc and ignite flammable occurred and normal operation of the product ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22764.4-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22764.4-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22764.4-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22764.4-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.