GB/T 22698-2022 English PDFUS$124.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22698-2022: Guide on the safety of multimedia equipment Status: Valid GB/T 22698: Historical versions
Basic dataStandard ID: GB/T 22698-2022 (GB/T22698-2022)Description (Translated English): Guide on the safety of multimedia equipment Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: A00 Word Count Estimation: 6,689 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 22698-2022: Guide on the safety of multimedia equipment---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Guide on the safety of multimedia equipment ICS 35.020 CCSA00 National Standards of People's Republic of China Replaces GB/T 22698-2017 Multimedia Device Safety Guidelines (IEC Guide112.2017, IDT) Published on 2022-07-11 2023-02-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface I Introduction II 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Criterion 1 4.1 Compliance 1 4.2 General requirements 2 4.3 Flag 2 4.4 Interface to communication network 2 4.5 Devices containing coin cell batteries2 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 22698-2017 "Safety Guidelines for Multimedia Equipment". Compared with GB/T 22698-2017, except for structural adjustment In addition to editorial changes, the main technical changes are as follows. a) the editions of IEC 60065 and IEC 60950-1 referred to in this document have been changed; b) increased the use of IEC 62368-1 (see Chapter 1, 4.1); c) Added 4.3 "Signs"; d) Added 4.5 "Devices Containing Coin Cell Batteries". This document is equivalent to IEC Guide112.2017 "Safety Guidelines for Multimedia Equipment", and the document type is adjusted from IEC guidelines to my country's national standard. A chapter "Terms and Definitions" has been added to this document. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed and managed by the National Electrical Safety Standardization Technical Committee (SAC/TC25). This document is drafted by. China Electronics Standardization Institute, Beijing Institute of Electrical Technology and Economics of Machinery Industry, Ziguang Hengyue Technology Co., Ltd., Shandong Xintong Electronics Co., Ltd., Edelman Hydrogen Energy Equipment Co., Ltd., China National Accreditation Center for Conformity Assessment, Beijing Saixi Technology Development Co., Ltd., Masterfu (Guangzhou) Standard Technology Research Co., Ltd., Hainan Huarui Hengyue Technology Co., Ltd., Zhengzhou University, Xi'an Xinlinda Digital Technology Co., Ltd., Shaanxi Xiejia Yaguang Software Co., Ltd., Jinhua Wangyuan Electronic Technology Co., Ltd., Shaanxi Panbiao Software Co., Ltd. The main drafters of this document. Liu Yunzhu, Ma Hong, Wang Dongsheng, Cai Fudong, Liu Chong, Wang Ying, Wang Liwen, Zhu Jian, Guo Yu, Kong Zhiqiang, Zhang Xiaoxiao, Niu Xiao, Zhang Zijiao, Wu Finance, Yang Lingling, Wang Zhesi, Wang Guangjian, Xiang Shenglin. The previous versions of this document and its superseded documents are as follows. ---First published in.2008 as GB/T 22698-2008, first revised in.2017; ---This is the second revision.IntroductionThis document contains several guidelines for evaluating the safety of multimedia equipment using IEC 60065 and IEC 60950-1. This document has been developed on the basis of the following basic principles. --- Equipment meeting the requirements of IEC 60065 and equipment meeting the requirements of IEC 60950-1 are considered safe when used independently; --- The above equipment interconnected in accordance with installation instructions in a multimedia system is also considered safe. It should be noted that there are some differences between the above two documents. In addition to the requirements specified in IEC 60065 and IEC 60950-1, this document also gives other requirements that should be met. For multimedia systems including Class I and Class II equipment, the connection to the power supply should ensure a reliable connection to the protective earth of Class I equipment. Multimedia Device Safety Guidelines1 ScopeThis document provides guidance for evaluating the safety of multimedia equipment using IEC 60065 and IEC 60950-1. This document focuses on the use of IEC 60065 or IEC 60950-1.As an alternative to these two standards, IEC 62368-1 can be used.2 Normative referencesThe contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. tus-Safetyrequirements) Note. GB 8898-2011 Safety Requirements for Audio, Video and Similar Electronic Equipment (IEC 60065.2005, MOD) paratus-Safety requirements) Note. GB 4943.1-2011 Information Technology Equipment Safety Part 1.General Requirements (IEC 60950-1.2005, MOD) ment-Safety-Part 1.Generalrequirements) IEC 62368-1 Audio-visual, information technology and communication technology equipment Part 1.Safety requirements (Audio/video,3 Terms and DefinitionsThere are no terms and definitions that need to be defined in this document.4 Guidelines4.1 Compliance Equipment used in multimedia systems should conform to. --- IEC 60065 or IEC 60950-1 at the manufacturer's choice; and --- Supplementary content listed in this chapter. As described in Chapter 1, this document focuses on the use of IEC 60065 or IEC 60950-1.As an alternative to these two standards, it is possible to Consider IEC 62368-1. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22698-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 22698-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22698-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22698-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 22698-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22698-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
