GB/T 22697.3-2008 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22697.3-2008: Risk assessment for the temperatures of hot surfaces of electrical equipment to be touched -- Part 3: The protective measures against burns Status: Valid
Basic dataStandard ID: GB/T 22697.3-2008 (GB/T22697.3-2008)Description (Translated English): Risk assessment for the temperatures of hot surfaces of electrical equipment to be touched -- Part 3: The protective measures against burns Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 29.020 Word Count Estimation: 7,757 Date of Issue: 2008-12-31 Date of Implementation: 2009-11-01 Quoted Standard: GB/T 22697.1; GB/T 22697.2-2008 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies requirements for contact with the body burns risks that may arise, to take protective measures proposed principles and re-evaluation of protective measures, and cited examples of protective measures. This section applies to hot surfaces of electrical equipment risk assessment guidance when protective measures are implemented. This section also for the Technical Committee, management or engineering staff to identify specific protective measures to provide a basis burns. Specific protection measures shall not be considered in this part of the range. GB/T 22697.3-2008: Risk assessment for the temperatures of hot surfaces of electrical equipment to be touched -- Part 3: The protective measures against burns---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. Risk assessment for the temperatures of hot surfaces of electrical equipments to be touched Part 3. The protective measures against burns ICS 29.020 K09 National Standards of People's Republic of China Electrical equipment of hot surfaces Risk Assessment Part 3. protective measures Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Protective measures 1 4.1 Overview 1 4.2 may contact the surface of the protective measures 1 4.3 adjacent surfaces of the protective measures 1 4.4 Other protective measures 2 Reassessment of protective measures 2 5 Appendix A (informative) protective measures Example 3ForewordGB/T 22697 "Electrical Equipment of hot surfaces Risk Assessment" is divided into three parts. --- Part 1. General; --- Part 2. burn threshold; --- Part 3. protective measures. This section is GB/T Part of 322,697. Referring to the development of this part of the CENELEC Guide 29.2007 "Electrical equipment may contact the hot surfaces of the risk assessment." This section should be GB/T 22697.1 "hot surfaces of electrical equipment risk assessment - Part 1. General" supporting the use. Appendix A of this section is an informative annex. This part of the National Electrical Safety Standardization Technical Committee (SAC/TC25) and focal points. This part mainly drafted by. Shanghai Electric Tool Research Institute, Beijing Electrical Machinery Industry Technical and Economic Research Institute, Shanghai Electrical Apparatus Research Institute The study (Group) Co., Ltd., Schneider Electric (China) Investment Co., Ltd. The main drafters of this section. Libang Association, Zeng Yan Hong, leather bag, Li Feng, Ji Yu Hui, He was the husband, Zhang Liang, Zhang Ping. This section first release. Electrical equipment of hot surfaces Risk Assessment Part 3. protective measures1 ScopeThis section for electrical equipment for thermal surface contact with the body burns risks that may arise, to take protective measures proposed principles and protection Re-evaluation of the measures and cited examples of protective measures. This section applies to the guidance of the electrical protective measures are implemented when the surface of the device heat burns risk assessment. This part may also be the Technical Committee, management or engineering staff to identify specific protective measures to provide evidence of burns. Within a predetermined range of specific protection measures are not considered in this section.2 Normative referencesThe following documents contain provisions which, through reference GB/T 22697 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 22697.1 Electrical equipment of hot surfaces Risk assessment - Part 1. General GB/T 22697.2-2008 Electrical equipment of hot surfaces Risk assessment - Part 2. burns threshold3 Terms and DefinitionsTerms and definitions GB/T 22697.1 established in this section apply to GB/T 22697 of.4 Protection Measures4.1 Overview If the risk assessment shows that the risk of burns may occur, you should determine whether it is necessary to take protective measures, if necessary, should be determined taking Which protective measures. In order to reduce or eliminate any risk of burns may occur, protective measures should apply to all products and production Product standards to be specified. Under normal circumstances, protective measures can be taken in engineering, management or personnel protection in three areas. As to whether it is necessary to take all protective measures And take to apply protective measures will depend on the use of the product. Set specific protective measures within the scope of this part of the discussion. Protective measures or protection of information and product manufacturers can use specially adapted to provide the user with the equipment. 4.2 contact surface protection measures One of protective measures is to limit the surface temperature of the device burns below the threshold that the surface temperature limits should be determined in the product standard gauge Burns within a given threshold value or less. In this regard, the manufacturer should take appropriate protective measures, so that the products meet the established temperature limits Claim. Surface temperature and the surface temperature of the restrictions established limits only apply to products of some components that are shipped products The main part of the line is necessary to heat the product will not be considered. 4.3 adjacent surface protection measures Suitable protective measures include. to limit the product dimension to the smallest area, the use of alternative materials or surface structure and to limit The possibility of contact with the surface adjacent to and functional surface by taking quarantine measures to reduce the temperature of the conductive or insulating. Relevant product standard or product manufacturer shall determine the size of the surface of the product features, if necessary, temperature limits and other relevant ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22697.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22697.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22697.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22697.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
