GB/T 22696.3-2008 English PDFUS$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22696.3-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 3: Example of hazards, hazardous situations and hazardous events Status: Valid
Basic dataStandard ID: GB/T 22696.3-2008 (GB/T22696.3-2008)Description (Translated English): Electrical equipment safety -- Risk assessment and risk reduction -- Part 3: Example of hazards, hazardous situations and hazardous events Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 29.020 Word Count Estimation: 10,123 Date of Issue: 2008-12-31 Date of Implementation: 2009-11-01 Quoted Standard: GB/T 22696.1-2008; GB/T 22696.2-2008 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the hazard identification of the actual operation of the relevant processes and procedures recommended for specific methods of operation, and gives an assessment of the relevant examples. This section is about the expectations of users of electrical equipment safety into the design, manufacture, installation, maintenance, or improvement of designers, technicians or safety standards experts. This section applies in addition to the design phase, manufacturing and commissioning process for security risk assessment, it can also be used in electrical equipment, technical improvements in the safety risk assessment, or the assessment of existing electrical equipment, as well as at any time, including in the accident or failure of hazard identification. GB/T 22696.3-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 3: Example of hazards, hazardous situations and hazardous events---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Electrical equipment safety Risk assessment and risk reduction Part 3. Example of hazards, hazardous situations and hazardous events ICS 29.020 K09 National Standards of People's Republic of China Security risk assessment and risk reduction in electrical equipment Part 3. dangerous, dangerous situation and Example hazardous event Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 steps and methods of hazard identification process 1 4.1 Identification of hazards 1 4.2 by using the form of hazard identification 1 Method 2 4.3 Description Example 5 hazard identification 2 Table 1 Table 2 Hazard Identification Example 2 Table dangerous, hazardous situations and hazardous events 3ForewordGB/T 22696 "security risk assessment and risk reduction in electrical equipment" is divided into three parts. --- Part 1. General; --- Part 2. Risk analysis and risk assessment; --- Part 3. dangerous, dangerous situations and examples of hazardous events. This part of GB/T 22696 Part 3. This standard is intended to provide all technical committees of professional safety standards for all types of electrical equipment used in order to help standardize professional products Applications technical committee ISO /IEC Guide 50, 51 and 71, and the program is to reduce systematic risk assessment and give practical guidance. Before the development of relevant standards in safety requirements, professional products Standardization Technical Committee has responsibility for the product considering all relevant With the implementation of this standard hazard risk assessment system. No risk assessment in product-related standards under the provisions of the manufacturer decides not to use or other relevant standards, this standard can be Manufacturers design products applied. This section based on GB/T 22696.1 and the relevant principles GB/T 22696.2, the electrical equipment for the identification of hazardous actual operation As recommended for the relevant processes or steps specific methods of operation, and include the risk of dangerous situations and examples of hazardous events, for electrical equipment Designers, technicians or safety standards expert reference. This part of the National Electrical Safety Standardization Technical Committee (SAC/TC25) and focal points. This part mainly drafted by. Shanghai Electric Tool Research Institute, Beijing Electrical Machinery Industry Technical and Economic Research Institute, Shanghai Electrical Apparatus Research Institute The study (Group) Co., Ltd. The main drafters of this section. Libang Association, Li Feng, Ji Yu Hui, Liu Jiang, leather bag, Zhang Liang, He was the husband, Chen Kaitai, Yan had hung. This section first release. Security risk assessment and risk reduction in electrical equipment Part 3. dangerous, dangerous situation and Example hazardous event1 Scope1.1 section gives a basis GB/T 22696.1-2008 electrical equipment risk assessment, hazard identification of the relevant actual operation Specific methods of operation as recommended for the relevant processes and procedures, and gives an assessment of the relevant examples. 1.2 part desired by the user is on the safety of electrical equipment into the design, manufacture, installation, maintenance, or improvement of designers, technical Or security standards experts. In addition to section 1.3 applies to the design stage, the process of manufacture and commissioning of security risk assessment, but also for the technology of electrical equipment Surgery performed to improve security risk assessment, or evaluation of existing electrical equipment, as well as at any time, including in the event of an accident or malfunction The hazard identification.2 Normative referencesThe following documents contain provisions which, through reference in this text, constitute provisions of this part of the GB/T 22696 of. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Security risk assessment and risk reduction GB/T 22696.1-2008 Electrical Equipment Part 1. General GB/T 22696.2-2008 security risk assessment and risk reduction in electrical equipment - Part 2. Risk analysis and risk assessment3 Terms and DefinitionsGB/T 22696.1-2008 and established the following terms and definitions apply to this part of the GB/T 22696 of. 3.1 Provide integrated manufacturing systems (IMS) or part of the associated physical device or service the system, such as designers, manufacturers, bearing Contractors, installers, integrators and so on.4 steps and methods of hazard identification process4.1 Identification of hazards Hazard identification according to GB/T 22696.2-2008 4.3.2 Recommended hazard identification methods and tools used 4.3.4 induction Electrical equipment hazards inventory and classification, the use of text, tables to represent. 4.2 by using the form of hazard identification Using GB/T 22696.2-2008 4.3.4 inductive electrical equipment inventory and classification of hazards can not be considered comprehensive and exhaustive But it can be dangerous as a starting point for identifying relevant. Therefore, to ensure a more comprehensive hazard identification, should give further consideration to other resources, such as law Regulations, standards, engineering knowledge. Electrical equipment due to its function, purpose and structure of each are not identical, there are not necessarily listed in GB/T 22696.2-2008 4.3.4 of Hazard, therefore, identify the hazards of different types of electrical equipment for specific analysis should be. Identification of hazards of electrical equipment, with the development of science and technology, improve the cognitive level, rich practical experience, the ability to identify the level of ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22696.3-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22696.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22696.3-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22696.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
