GB/T 22696.2-2008 English PDFUS$259.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22696.2-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 2: Risk analysis and risk evaluation Status: Valid
Basic dataStandard ID: GB/T 22696.2-2008 (GB/T22696.2-2008)Description (Translated English): Electrical equipment safety -- Risk assessment and risk reduction -- Part 2: Risk analysis and risk evaluation Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 29.020 Word Count Estimation: 11,174 Date of Issue: 2008-12-31 Date of Implementation: 2009-11-01 Quoted Standard: GB/T 22696.1-2008; GB/T 22696.3-2008 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the electrical equipment risk assessment on risk analysis and risk assessment guidelines and facilities methods. Risk analysis includes constraints and hazards to determine their recognition. Users of this section is to secure the desired electrical equipment into the design, manufacture, installation, maintenance or improvement of the designers, technicians or safety standards experts. This section applies in addition to the design phase, as well as manufacturing and commissioning process for security risk assessment, it can also be used in electrical equipment, technical improvements in the safety risk assessment, or the assessment of existing electrical equipment, as well as at any time, for example, in the event of an accident or failure to carry out a risk assessment. GB/T 22696.2-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 2: Risk analysis and risk evaluation---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Electrical equipment safety Risk assessment and risk reduction Part 2. Risk analysis and risk evaluation ICS 29.020 K09 National Standards of People's Republic of China Security risk assessment and risk reduction in electrical equipment Part 2. Risk analysis and risk assessment Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 Risk Analysis 1 4.1 Overview 1 4.2 to determine the limits of electrical equipment 1 Identify dangerous 2 4.3 4.4 Estimated risk 5 5 6 Risk Assessment 1 hazard identification of bottom-up and top-down approach Figure 7 2 7 of injury conditionsForewordGB/T 22696 "security risk assessment and risk reduction in electrical equipment" is divided into three parts. --- Part 1. General; --- Part 2. Risk analysis and risk assessment; --- Part 3. dangerous, dangerous situations and examples of hazardous events. This part of GB/T 22696 Part 2. This standard is intended to provide all technical committees of professional safety standards for all types of electrical equipment used in order to help standardize professional products Applications technical committee ISO /IEC Guide 50, 51 and 71, and the program is to reduce systematic risk assessment and give practical guidance. Before the development of relevant standards in safety requirements, professional products Standardization Technical Committee has responsibility for the product considering all relevant With the implementation of this standard hazard risk assessment system. No risk assessment in product-related standards under the provisions of the manufacturer decides not to use or other relevant standards, this standard can be Manufacturers design products applied. This part of the National Electrical Safety Standardization Technical Committee (SAC/TC25) and focal points. This part mainly drafted by. Shanghai Electric Tool Research Institute, Shanghai Electrical Apparatus Research Institute (Group) Co., Ltd., Beijing Machinery Industry Electrical Technology and Economy Institute. The main drafters of this section. Libang Association, Ji Yu Hui, Fang Xiaoyan, Liu Jiang, leather bag, has hung Yan, Zhang Liang, He was the husband, Chen Kaitai. This section first release. Security risk assessment and risk reduction in electrical equipment Part 2. Risk analysis and risk assessment1 Scope1.1 section provides information on the risk analysis and risk assessment according to GB/T 22696.1-2008 electrical equipment when the risk assessment Guiding principles and implementation methods. Risk analysis includes limitations and hazards determination and identification method. 1.2 part desired by the user is to integrate safety electrical equipment design, manufacture, installation, maintenance or improvement of the designers, technical staff Or safety standards experts. 1.3 In addition to the part of security risk assessment applicable to the design stage, as well as manufacturing and commissioning process, it can also be used in electrical equipment Technological improvements in security risk assessment, or evaluation of existing electrical equipment, as well as at any time, such as accidents or so in When the barrier, risk assessment.2 Normative referencesThe following documents contain provisions which, through reference GB/T 22696 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Security risk assessment and risk reduction GB/T 22696.1-2008 Electrical Equipment Part 1. General GB/T 22696.3-2008 security risk assessment and risk reduction in electrical equipment - Part 3. danger, peril and danger Example risk event3 Terms and DefinitionsGB/T 22696.1-2008 and established the following terms and definitions apply to this part of the GB/T 22696 of. 3.1 Providing or integrated manufacturing systems (IMS) or the relevant part of the equipment or service entity of the system, such as designers, manufacturers, bearing Contractors, installers, integrators and so on.4 Risk Analysis4.1 Overview The following provisions set forth in the risk analysis process embodiment shown in GB/T 22696.1-2008 figure, the functions related to electrical equipment, Restrictions on its use, hazard identification and method, information recording, risk estimates. 4.2 determine the limits of electrical equipment 4.2.1 Overview Electrical equipment restriction is functional electrical equipment, use, foreseeable misuse, and the use and maintenance of electrical equipment to the type of environment I clear description. The foregoing description is by electrical equipment functionality and the use of electrical equipment to the actual situation to be realized. 4.2.2 Electrical equipment Electrical equipment of electric power used by a variety of parts, components, or products, its function as follows. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22696.2-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22696.2-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22696.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22696.2-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
