GB/T 22696.1-2008 English PDFUS$419.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22696.1-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 1: General requirements Status: Valid
Basic dataStandard ID: GB/T 22696.1-2008 (GB/T22696.1-2008)Description (Translated English): Electrical equipment safety -- Risk assessment and risk reduction -- Part 1: General requirements Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: K09 Classification of International Standard: 29.020 Word Count Estimation: 18,136 Date of Issue: 2008-12-31 Date of Implementation: 2009-11-01 Quoted Standard: GB/T 4776; GB 19517-2004; GB/T 19678; ISO 13407-1999 Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the electrical equipment safety risk assessment procedures, but also gives information on the implementation of risk assessment, describing the hazard identification, risk estimation and evaluation, risk comparisons, and the necessary risk reduction program. This section applies to AC voltage 1000V and below, the DC voltage 1500V and the following types of electrical equipment, making these devices presents a security risk assessment, to the general principles of safety. By bringing together the parts of electrical equipment design, manufacture, installation, use, maintenance, accidents and injuries of knowledge and experience, analysis of electrical equipment risk to people and property may damage electrical equipment life cycle assessment of the various stages of the risk presented basic measures to reduce risk. This section is intended for electrical equipment safety decisions, and that they have implemented the formation of the wind ???????? �c?????? ��???? �c??????????? ? uI????? #? #??? GB/T 22696.1-2008: Electrical equipment safety -- Risk assessment and risk reduction -- Part 1: General requirements---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. . Electrical equipment safety Risk assessment and risk reduction Part 1. General requirements ICS 29.020 K09 National Standards of People's Republic of China Security risk assessment and risk reduction in electrical equipment Part 1. General Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsPreface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions 4 General Principle 3 Principle 3 4.1 Security 4.2 Safety risk assessment process 3 4.3 Risk assessment information 4 Electrical apparatus 5 determines restrictions 4 5.1 Constraints 4 5.2 space constraints 4 5.3 Time limits 5 5.4 Other constraints 5 Identify hazards 5 6 Estimated risk 6 7 7.1 General 6 7.2 Risk factors 6 7.3 Risk factors considered in the estimated 7 8 8 Risk Assessment 8.1 General 8 Factors considered in the risk assessment 8.2 8 8.3 by protection measures to eliminate or reduce the risk of dangerous 9 8.4 Comparison of risk 9 9 Risk Reduction 10 10 File 10 References 14 1 schematically safety principles 11 Figure 2 logical process risk assessment 11 Figure 3 Estimated Risk Risk Factors 12 Estimated risk 4 12 5 risk reduction process 13ForewordGB/T 22696 "security risk assessment and risk reduction in electrical equipment" is divided into three parts. --- Part 1. General; --- Part 2. Risk analysis and risk assessment; --- Part 3. dangerous, dangerous situations and examples of hazardous events. This part of GB/T 22696 Part 1. This standard is intended to provide all technical committees of professional safety standards for all types of electrical equipment used in order to help standardize professional products Applications technical committee ISO /IEC Guide 50, 51 and 71 national standards conversion, and systems for risk assessment and risk reduction program It gives practical guidance. Before the development of relevant standards in safety requirements, professional products Standardization Technical Committee has responsibility for the product considering all relevant With the implementation of this standard hazard risk assessment system. No risk assessment in product-related standards under the provisions of the manufacturer decides not to use or other relevant standards, this standard can be Manufacturers design products applied. This part of the National Electrical Safety Standardization Technical Committee (SAC/TC25) and focal points. This section is responsible for drafting unit. Electrical Machinery Industry Beijing Technology and Economy Institute, Shanghai Electric Tool Research Institute, Shanghai Electrical Apparatus Research Institute The study (Group) Co., Ltd. Participated in the drafting of this section. Schneider Electric (China) Investment Co., Ltd., Rockwell Automation Research (Shanghai) Co., Ltd. The main drafters of this section. Fang Xiaoyan, Libang Association, leather bag, has hung Yan, Liu Jiang, Ji Yu Hui, Zhang Liang, it was the husband, Chen Kaitai. This section first release. Security risk assessment and risk reduction in electrical equipment Part 1. General1 Scope1.1 section provides electrical equipment safety risk assessment procedures, risk assessment also given information describes identify a hazard, pre Assessment and evaluation of risk, and risk is the necessary risk reduction program. 1.2 section applies to AC voltage 1000V and below, the DC voltage 1500V and below the various types of electrical equipment, raised these Safety equipment when conducting a risk assessment, to the general principles of security. This part of the collection of electrical equipment design, manufacture, installation, so Use, maintenance, knowledge and experience of accidents and injuries, analysis of electrical equipment risks to people and property from possible damage assessments electrical equipment Students Risk at all stages of the life cycle of the proposed basic measures to reduce risks. 1.3 section is intended for security decisions for electrical equipment, as well as the formation of various documents to prove that the implementation of the risk assessment to provide guidance. Such as If the use of international standards corresponding professional product safety, national standards, to solve all the dangers of this standard are listed in Section 2, it can be regarded as up Necessary risk reduction to the requirements of this section, the product is safe. 1.4 pairs of internally generated voltage higher than AC 1000V, 1500V DC electrical equipment, if the generated voltage is inaccessible, The electrical equipment also belong to the scope of this section. 1.5 section does not apply to electrical equipment used in the risk assessment, nor the use of electrical equipment information will be described in detail.2 Normative referencesThe following documents contain provisions which, through reference GB/T 22696 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 4776 Electrical Safety Terms GB 19517-2004 National Electrical Safety Equipment Technical Specifications GB/T 19678 specification preparation composition, content and presentation method (GB/T 19678-2005, IEC 62079.2001, IDT) ISO 13407.1999 human-centered design of interactive systems3 Terms and DefinitionsGB/T 4776 and established the following terms and definitions apply to this part of the GB/T 22696 of. 3.1 Where by function and structure applicable to products or components of power application, that the meaning of this standard in the electrical equipment. Such as power generation, transmission, distribution Power, storage, measurement, control, regulation, conversion, monitoring, protection, and power consumption of products, including in the field of communication technology and combine them into Electrical equipment, electrical equipment, electrical appliances. [GB 19517-2004, defined B. 1] 3.2 People, physical injury or damage to property. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22696.1-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22696.1-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22696.1-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22696.1-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
