GB/T 22692-2008 English PDF

US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22692-2008: Switches for electric tools
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22692-2008	649	Add to Cart	5 days	Switches for electric tools	Valid

Similar standards

GB/T 22794   GB 16916.1   GB 29303   GB/T 33346   GB/T 22693   GB/T 22691   

Basic data

Standard ID: GB/T 22692-2008 (GB/T22692-2008)
Description (Translated English): Switches for electric tools
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K31
Classification of International Standard: 29.120.40
Word Count Estimation: 28,280
Date of Issue: 2008-12-31
Date of Implementation: 2009-11-01
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the power tool switch (hereinafter referred to as switch) classification, security and performance of the basic requirements and corresponding test methods and inspection rules. This standard applies to general environmental conditions, the maximum operating voltage not exceeding 480V, frequency does not exceed 400Hz, rated current not exceeding 63A switch, such switches installed in the electric tool body or attachment to do on and off of the current or changing the direction of rotation of power tools, limiting load speed, running speed adjustment and other protection and control purposes. The switch is required to be passed from person to operate the actuator, or by excitation sensor operation. Actuator or sensor can be physically or electrically combined with the switch can also be configured separately, may also contain the actuator or sensor signal and the switch between

GB/T 22692-2008: Switches for electric tools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Switches for electric tools ICS 29.120.40 K31 National Standards of People's Republic of China Power Tools switch Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 Terms and definitions Rating 2 4 5 classification, model and mark 3 6 Technical requirements and test methods 8 7 packaging, transportation and storage 17 Appendix A (informative) Inspection Rules 21

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Electric annex Standardization Technical Committee (SAC/TC67) centralized. This standard was drafted. Shanghai Electric Tool Research Institute. The main drafters. Zhang Weichang, Liu Jiang. This standard was first formulated. Power Tools switch

1 Scope

This standard specifies the basic requirements for electric power tool switch (hereinafter referred to as switch) classification, security and performance and the appropriate test side Method and inspection rules. This standard applies to general environmental conditions of use, does not exceed the maximum operating voltage AC 480V, frequency does not exceed 400Hz, rated Current does not exceed 63A switch The switch is mounted on the body of the power tool or accessory, it does making and breaking the current or power tool change Direction of rotation, limit load speed, and adjusts the speed of other protection and control purposes. The switch is to be prescribed by the people through the actuator operation, or by excitation sensor operation. Actuator or sensor can be electrically or physically Combined with the switch on the air together, can also be configured separately, may also contain a signal transmission actuator or sensor and switch between, for example, electrical The signal transmitting light, sound or temperature. Both the opening and closing functionality requires additional control function switches scope of this standard. This standard also includes indirect drive switch, then operate the actuator or sensor is part of the remote control, appliance or apparatus (Example Such as doors) to reach. Note 1. Electronic switches may be combined with providing full disconnection or micro- disconnection of mechanical switches. Note 2. The electronic switching power supply circuit with no mechanical switches provide only electronic disconnection. Therefore, the load circuit side is always considered as charged. Switch for dc power tool may refer to this standard. Switch or special purposes under special circumstances require the use of additional provisions in the product standard.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 2099.1-2008 plug socket for household and similar purposes - Part 1. General requirements (IEC 60884-1.2006, MOD) GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) GB/T 2900.70-2008 Electrotechnical terminology of electrical accessories (IEC 60050-442.1998, IDT) GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT) GB 15092.1-2003 Switches for appliances - Part 1. General requirements (IEC 61058-1.2001, IDT) GB 15092.3-1998 Switches for appliances Part 2. Particular requirements for change-over selector (IEC 61058-2-5.1994, IDT) GB 17196-1997 Connecting devices - Flat quick copper wire connecting terminal Safety requirements IEC 61058-1A2.2007 Switches for appliances - Part 1. General requirements - Amendment No. 2

3 Terms and Definitions

Purposes of this standard, the following definitions apply. 3.1 Having making and breaking current ability to change the internal circuit power tool connected state, thereby changing the direction of operation of the power tool switch. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22692-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22692-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22692-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22692-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.