GB/T 22691-2008 English PDF

US$649.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22691-2008: DC switches for battery power tools
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22691-2008	649	Add to Cart	5 days	DC switches for battery power tools	Valid

Similar standards

GB/T 22794   GB 16916.1   GB 29303   GB/T 33346   GB/T 22693   GB/T 22692   

Basic data

Standard ID: GB/T 22691-2008 (GB/T22691-2008)
Description (Translated English): DC switches for battery power tools
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K31
Classification of International Standard: 29.130.20
Word Count Estimation: 28,257
Date of Issue: 2008-12-31
Date of Implementation: 2009-11-01
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the power tool battery with DC switch (hereinafter referred to as switch) classification, security and performance of the basic requirements and corresponding test methods and inspection rules. This standard applies in the battery electric tools or similar appliances handle for turning on and off the battery pack to the motor power supply circuit, adjust the motor speed or change the motor direction of rotation manually DC switch (hereinafter referred to as switch). Switch rated voltage not exceeding 36V, rated current less than 40A. The switch is required to be passed from person to operate the actuator, or by excitation sensor operation. The actuator or sensor when the entity or electrically together with the switch, can be configured separately from the actuator may also contain, or sensor and signal transmission between the switches, such as electrical, optical, acoustic, or temperature signal transmission.

GB/T 22691-2008: DC switches for battery power tools

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
DC switches for battery power tools ICS 29.130.20 K31 National Standards of People's Republic of China Battery-operated electric tools DC switch Posted 2008-12-31 2009-11-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 Terms and definitions Rating 1 4 Category 5, Part 2 and sign 6 Technical requirements and test methods 6 7 packaging, transportation and storage 16 Appendix A (informative) Inspection Rules 20

Foreword

Appendix A of this standard is an informative annex. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Electric annex Standardization Technical Committee (SACTC67) centralized. This standard is drafted by. Shanghai Electric Tool Research Institute. Participated in the drafting of this standard. Shanghai Electric Co., Ltd. Cheng worship. The main drafters. Zhang Weichang, Liu Jiang, Xu Xinsheng. This standard was first formulated. Battery-operated electric tools DC switch

1 Scope

The main provisions of the standard battery electric tools DC switch (hereinafter referred to as the switch) the essential requirements and classification, security and performance Appropriate test methods and inspection rules. This standard applies to the battery housed in the handle electric tools or similar appliances, and for turning on and off the power supply to the motor battery pack Circuit, adjust the motor speed or direction of motor rotation is changed manually DC switch (hereinafter referred to as switch). The switch does not exceed the rated voltage Over 36V, rated current less than 40A. The switch is to be prescribed by the people through the actuator operation, or by excitation sensor operation. Actuator or sensor can be electrically or physically Combined with the switch on the air together, can also be configured separately, may also contain a signal transmission actuator or sensor and switch between, for example, electrical The signal transmitting light, sound or temperature. Note 1. Electronic switches may be combined with providing full disconnection or micro- disconnection of mechanical switches. Note 2. The electronic switching power supply circuit with no mechanical switches provide only electronic disconnection. Therefore, the load circuit side is always considered as charged. Switch or special purposes under special circumstances require the use of additional provisions in the product standard.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 2099.1-2008 plug socket for household and similar purposes - Part 1. General requirements (IEC 60884-1.2006, MOD) GB/T 2828.1-2003 Sampling procedures for inspection - Part 1. by acceptance quality limit (AQL) retrieval batch test sample Programme (ISO 2859-1.1999, IDT) GB/T 2900.70-2008 Electrotechnical terminology of electrical accessories (IEC 60050-442.1998, IDT) GB 4208-2008 housing protection (IP Code) (IEC 60529.2001, IDT) GB 15092.1-2003 Switches for appliances - Part 1. General requirements (IEC 61058-1.2001, IDT) GB 15092.3-1998 Switches for appliances Part 2. Particular requirements for change-over selector (IEC 61058-2-5.1994, IDT) GB/T 22692-2008 Power Tools switch IEC 61058-1A2.2007 Switches for appliances - Part 1. General requirements - Amendment No. 2

3 Terms and Definitions

GB/T 2900.70, GB/T 22692 terms and definitions apply.

4 RATINGS

The switch according to the rating specified in Table 1. Preferred values \u200b\u200bof Table 1 rating Power type Maximum operating voltage/V Rated current/A Direct-current Like × 1.2 (Where any form of 2-30 of a positive integer.) 2,4,6,10,16,25,40 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22691-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22691-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 3 ~ 5 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22691-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22691-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.