GB/T 22676-2008 English PDF

US$369.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22676-2008: Impact drills
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22676-2008	369	Add to Cart	3 days	Impact drills	Valid

Similar standards

GB/T 4343.2   GB/T 3883.311   GB/T 3787   GB/T 22677   GB/T 22678   GB/T 22675   

Basic data

Standard ID: GB/T 22676-2008 (GB/T22676-2008)
Description (Translated English): Impact drills
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K64
Classification of International Standard: 25.140.20
Word Count Estimation: 16,158
Date of Issue: 2008-12-31
Date of Implementation: 2009-10-01
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the basic parameters of impact drills, type, technical requirements, test methods, inspection rules and other requirements. This standard applies to general environmental conditions on masonry, lightweight concrete, ceramics, metal and similar materials used in drilling DC, AC-DC dual-use impact drills and single- phase series Impact Drill (hereinafter referred to as impact drills). This standard applies to electronic speed impact drills and the use of mechanical devices to set different speed range impact drills. Electronic speed impact drill is adjusted to a given electronic device speed range of the highest values ??of the basic parameters, two-speed impact drill is high gear when the basic parameters. This standard does not apply to set -hole drills and impact drills.

GB/T 22676-2008: Impact drills

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Impact drills ICS 25.140.20 K64 National Standards of People's Republic of China Impact drill Posted 2008-12-31 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ 1 Scope 1 2 Normative references 1 3 basic parameters and type 1 4 2 Technical Requirements Test Method 5 5 6 7 inspection rules 7 Marking and Packaging 8 8 9 warranty Table 1 Basic parameters 2 Table 2 noise limit 3 Table 3 3 continuous disturbance voltage limits Table 4 4 \u200b\u200bcontinuous disturbance power limits Table 5 steady-state harmonic current limits 4 Table 6 temperature rise limit 5 Table 7 Test drilling shaft 5

Foreword

The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee on Power Tools. This standard is drafted by. Hongda Group Co., Ltd., Shanghai Electric Tool Research Institute. The main drafters of this standard. JIANG Peng-fei, Liu Jiang, Jin Zhiying, Liangxi Bo, Liu Liangmin. Impact drill

1 Scope

This standard specifies the basic parameters of impact drills, type, technical requirements, test methods, inspection rules and other requirements. This standard applies to general environmental conditions of masonry, lightweight concrete, ceramics, metal and similar materials drilling DC, AC-DC two With the impact of single-phase series drills and impact drills (hereinafter referred to as impact drills). This standard applies to electronic speed impact drills and impact drills set different speed range by mechanical means. Electronic speed impact drill is In the electronic device is adjusted to the basic parameters for the highest value at a given speed range, the two-speed impact drills are basic parameters during high gear. This standard does not apply to drill and impact drill hole sleeve.

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 755-2008 rotating motor fixed and performance (IEC 60034-1.2004, IDT) GB 1002 Household and similar single-phase plugs and socket type, basic parameters and dimensions GB 2099.1 plugs and sockets for household and similar purposes - Part 1. General Requirements (GB 2099.1-2008, IEC 60884-1. 2006, E3.1, MOD) The first part of the GB 3883.1-2005 Safety hand-held power tools. General requirements (IEC 60745-1.2003, Ed3.2, IDT) The second part of the GB 3883.6-2007 Safety hand-held power tools. drills and impact drills requirements (IEC 60745- 2-1.2003, IDT) GB 4343.1-2003 Electromagnetic compatibility appliances, electric tools and similar apparatus - Part 1 launch (CISPR14-1.2000 + A1, IDT) GB/T 4583-2007 Power Tools Noise Measurement Engineering method (ISO 3744.1994, NEQ) GB/T 5013.4-2008 rated voltage of 450/750V and below rubber insulated cables Part 4. Cords and flexible cables (IEC 60245-4.2004, IDT) GB/T 5023.5-2008 rated voltage of 450/750V and below PVC insulated cables Part 5. Flexible cables (cords) (IEC 60227-5.2003, IDT) GB/T 9088-2008 model designation Power Tools GB 17625.1-2003 Electromagnetic compatibility - Limits for harmonic current emissions (equipment input current ≤16A) (IEC 61000-3-2.2001, IDT) GB 17625.2-2007 Electromagnetic compatibility limits of the rated current per phase ≤16A and unconditional access to public low-voltage equipment Voltage power supply system generated voltage fluctuations and flicker limits (IEC 61000-3-3.2005, IDT) GB 19212.1-2008 power transformers, power supplies, reactors and similar products - Part 1. General requirements and tests (IEC 61558-1.2005, IDT) Part 7 GB 19212.7-2006 Safety of power transformers, power supply units and similar products. general purpose safety isolating transformer Particular requirements for the pressure (IEC 61558-2-6.1997, MOD)

3 basic parameters and type

3.1 The basic parameters of impact drills should meet the requirements of Table 1. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22676-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22676-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22676-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22676-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.