GB/T 22674-2008 English PDF

US$509.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22674-2008: Bushings for d.c. application
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22674-2008	509	Add to Cart	4 days	Bushings for d.c. application	Valid

Similar standards

DL/T 1000.1   DB12/ 356   DL/T 1000.3   GB/T 44179   GB/T 24622   GB/T 21421.1   

Basic data

Standard ID: GB/T 22674-2008 (GB/T22674-2008)
Description (Translated English): Bushings for d.c. application
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K48
Classification of International Standard: 29.080.20
Word Count Estimation: 22,268
Date of Issue: 2008-12-31
Date of Implementation: 2009-10-01
Adopted Standard: IEC 62199-2004, MOD
Regulation (derived from): Announcement of Newly Approved National Standards No. 23 of 2008 (No. 136 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard applies to all DC system voltage levels with outdoor and indoor casing. Can be gas condenser bushing or bushings, as oil-filled square wave converter transformer or reactor components, or air-to- air DC sleeves. This standard does not apply to the following situations: a) cable terminal (cable end sleeves), b) transformer casing, c) test transformer bushing, d) of gas-insulated outer casing (except air at atmospheric pressure outside) casing, e) industrial casing, f) traction with sleeves. this standard refers to GB/T 4109-2008 general terms and environmental conditions, the definition of special terminology used, the operating conditions, ratings, test procedures, as well as the general DC bushing mechanical and electrical performance requirements. Must

GB/T 22674-2008: Bushings for d.c. application

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Bushings for dc application ICS 29.080.20 K48 National Standards of People's Republic of China DC system cannula (IEC 62199.2004, MOD) Posted 2008-12-31 2009-10-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Introduction Ⅲ Introduction Ⅳ 1 Scope 1 2 Normative references 1 3 Terms and definitions Rating 2 4 4.1 Rated voltage 4.2 insulation level 2 4.3 Current Rating 2 4.4 Minimum nominal creepage distance 2 5 3 Operating Conditions 5.1 Overview 3 5.2 Factors affect the design, testing and application of 3 General Requirements 3 6 6.1 Variable 3 6.2 Nameplate 3 7 Test Requirements 4 7.1 General 4 7.2 Test Category 4 8 5 Type tests 8.1 Power frequency dry withstand voltage test and partial discharge measurements 5 8.2 Dry lightning impulse withstand voltage test (BIL) 5 8.3 dry or wet switching impulse withstand voltage test (SIL) 6 8.4 Temperature Rise Test 6 8.5 Cantilever load withstand test 6 8.6 liquid-filled, filling a mixture of liquid and an insulating sleeve seal test 6 8.7 internal pressure inflating gas-insulated and gas impregnated bushing Test 6 6 8.8 Dimensional inspection 9-by-test 7 9.1 dielectric loss factor (tanδ) and capacitance measurements 7 9.2 Dry lightning impulse withstand voltage test (BIL) 8 9.3 Power frequency dry withstand voltage test and partial discharge measurement 8 9.4 DC withstand voltage test and partial discharge measurement 8 9.5 polarity inversion test and partial discharge measurement 9 9.6 Insulation test tap 10 9.7 internal pressure inflating gas-insulated and gas impregnated bushing 10 test 9.8 liquid-filled, filling mixture and liquid insulating sleeve seal test 10 9.9 inflated, gas-insulated and gas seal test impregnated bushing 10 9.10 pairs of flanges and other sealing test fixture 10 9.11 appearance and dimensional inspection 11 10 special tests 11 Artificial pollution tests 11 10.1 10.2 DC voltage test even rain 11 10.3 DC voltage test uneven rain 11 10.4 umbrella cover materials resistance to tracking and erosion test 12 Appendix A (informative) This standard and IEC 62199.2004 technical differences and their reasons 14 Annex B (informative) of the Standard Terms and IEC 62199.2004 clause controls 15

Foreword

This revised standard adopts IEC 62199.2004 "DC system cannula." Taking into account the actual situation in China, in using IEC 62199.2004, the standard of this made some changes. Technical differences with the standard vertical Straight single line (|) in which they are involved in the provision of margin identity. It gives a technical differences and their causes in the informative Appendix A Lanbiao for reference. For ease of comparison, the data are listed in Appendix B of the Standard Terms and IEC 62199.2004 clause against a Lanbiao. For ease of use, this standard also made the following editorial changes. a) "this International Standard" be replaced by "this standard"; b) use a decimal point instead of a decimal comma ",". ","; c) Remove the preface to international standards. The Standard Annexes A and B are informative appendices. The standard proposed by China Electrical Equipment Industrial Association. This standard by the National Standardization Technical Committee Insulators (SAC/TC80) centralized. This standard was drafted. Xi'an Institute of Electric Porcelain, Electrical Machinery Industry Beijing Technology and Economy Institute, Xi'an Jiaotong University, the National Insulator Arrester Quality Supervision and Inspection Center, a limited liability company Xi'an high-voltage porcelain, Nanjing Electric (Group) Co., Ltd., Xi'an High Voltage Apparatus Research The, Xi'an Electric Transformer Co., Ltd., Baoding Tianwei Electric Co., Ltd., China Electric Power Research Institute, Shenyang Transformer Institute, TBEA Shenyang Transformer limited liability company. The main drafters of this standard. party town square, Fang Xiaoyan, Pengzong Ren, Wei Peng, Liu Xiaoliang, He Ping, Gou Ruifeng, Li Xi, Zhang joy, SU Zhi-yi, Liu Jie, Wang Jian, Li Xi education, Li Ting.

Introduction

In this standard, operating experience and in order to establish market requirements and existing standards have been coordinated, they are. GB/T 4109-2008 "higher than 1000V AC voltage bushings" (IEC 60137Ed.6.0, MOD). If necessary, you can also refer to the following criteria. GB/T 21429-2008 "outdoor and indoor electrical equipment hollow composite insulators definitions, test methods, acceptance criteria and design push recommend"; IEC 62155.2003 "rated voltages higher than 1000V electrical equipment hollow porcelain and glass insulators." Taking into account the high voltage DC power despite being a mature technology, but its operational experience with respect to the exchange system, there are still some limitations, The standard number of carefully designed and project-by-type test test. Non-ceramic casing is widely used in the DC system, in addition to artificial pollution tests of this standard for a variety of insulators same assessment procedures. This is When preparing the sample for artificial pollution test will damage the surface of composite insulators, it does not apply to composite insulators. DC system cannula

1 Scope

This standard applies to DC systems in all voltage levels of outdoor and indoor casing. May be a condenser bushing or gas-insulated casing, Used oil-filled transformer or converter smoothing reactor assembly, or air-to-air DC bushing. This standard does not apply to the following situations. a) cable terminal (cable end sleeves); b) the transformer casing; c) test transformer bushing; d) gas insulated external casing (except outside air at atmospheric pressure) of the casing; e) industrial casing; f) locomotives cannula. This standard refers to GB/T 4109-2008 General Terms and environmental conditions, it defines special terms used, the operating environment, the amount of Value, test procedures, and general mechanical and electrical performance requirements of the DC bushing. If necessary, it can refer to GB/T 21429- 2008 "Outdoor and indoor electrical equipment hollow composite insulators definitions, test methods, acceptance criteria and design recommendations" and IEC 62155. 2003 "rated voltages higher than 1000V electrical equipment hollow porcelain and glass insulators."

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 311.1-1997 insulation with high voltage power transmission equipment (neqIEC 60071-1.1993) GB/T 2900.8-1995 Electrotechnical terminology insulator (eqv IEC 60050-471. 1984) GB/T 4109-2008 AC voltage greater than 1000V insulating sleeve (IEC 60137Ed.6.0, MOD) GB/T 6553-2003 assessment used under severe ambient conditions of electrical insulating materials resistance to tracking and erosion test methods (IEC 60587. 1984, IDT) GB/T 7354-2003 partial discharge measurements (IEC 60270.2000, IDT) GB/T 16927.1-1997 high voltage test techniques Part 1. General test requirements (eqv IEC 60060-1. 1989) Above 1000V ac overhead lines Composite Insulators --- definitions, test methods GB/T 19519-2004 and nominal Acceptance criteria (IEC 61109.1992, MOD) GB/T 21429-2008 outdoor and indoor electrical equipment hollow composite insulators definitions, test methods, acceptance criteria and design Recommended (IEC 61462.1998, MOD) GB/T 22707-2008 high-voltage insulators for dc systems Artificial pollution tests (IEC /T R61245.1993, MOD) IEC 61463.2000 casing seismic conditions IEC 62155.2003 is higher than the rated voltage 1000V electrical equipment hollow porcelain and glass insulators

3 Terms and Definitions

The following terms and definitions, as well as terms and definitions GB/T 4109-2008 and GB/T 2900.8-1995 established applicable to this standard Accurate, if necessary, can also refer to GB/T 21429-2008 and IEC 62155.2003. 3.1 A method of installing the building (such as converter valve hall) wall (floor) of the casing. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22674-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22674-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22674-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22674-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.