GB/T 22343-2015 English PDF

US$489.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22343-2015: Natural gas generating set for the petroleum industry
Status: Valid

GB/T 22343: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22343-2015	489	Add to Cart	4 days	Natural gas generating set for the petroleum industry	Valid
GB/T 22343-2008	759	Add to Cart	5 days	Natural gas generating set for the petroleum industry	Obsolete

Similar standards

GB/T 23258   GB/T 21447   SY/T 5164   GB/T 23506   GB/T 22342   

Basic data

Standard ID: GB/T 22343-2015 (GB/T22343-2015)
Description (Translated English): Natural gas generating set for the petroleum industry
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: E92
Classification of International Standard: 75.180.10
Word Count Estimation: 23,297
Date of Issue: 2015-12-31
Date of Implementation: 2016-04-01
Older Standard (superseded by this standard): GB/T 22343-2008
Regulation (derived from): State Standard Announcement 2015 No.43
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China

GB/T 22343-2015: Natural gas generating set for the petroleum industry

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Natural gas generating set for the petroleum industry ICS 75.180.10 E92 National Standards of People's Republic of China Replace GB/T 22343-2008 Natural gas generator for oil industry 2015-12-31 released 2016-04-01 implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface III 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 General provisions 2 4.1 Standard Benchmark Status 2 4.2 running the scene situation 2 4.3 Power correction in the running field condition 2 4.4 Ambient temperature correction 2 4.5 fuel 2 4.6 oil 3 4.7 Calibration power and heat rate 3 4.8 Unit power rating type and operation mode 3 4.9 Performance Level 4 5 basic requirements 4 5.1 General requirements 4 5.2 fire, explosion and safety requirements 4 5.3 Fire requirements 5 5.4 Protection requirements 5 5.5 Protection measures 5 5.6 Monitoring Instrument 5 Technical requirements 5 6.1 Appearance quality 5 6.2 Starting performance 6 6.3 Continuous operation test 6 6.4 Electrical performance 6 6.5 Limitation of environmental pollution 8 6.6 Economy 9 6.7 Security 9 6.8 sets of 10 7 Test items and test methods 10 7.1 Instrument 10 7.2 Inspection items 10 7.3 Test requirements 11 7.4 Test methods 11 8 Inspection rules 16 8.1 Inspection Classification 16 8.2 Judgment Rule 17 8.3 Inspection conditions 17 9 mark, packaging, transportation, storage 17 9.1 Mark 17 9.2 Packaging, Transportation 18 9.3 Storage 18

Foreword

This standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 22343-2008 "Natural gas generator for oil industry". Compared with GB/T 22343-2008, The main technical changes are as follows. - the scope of application of the increase in diesel/natural gas dual-fuel internal combustion generator and marine drilling and production and processing platform with natural gas Internal combustion generator, the unit power range from 3kW ~ 3150kW modified to 3kW ~ 4500kW (see Chapter 1); --- Increased definition of natural gas generating units, diesel/natural gas dual fuel internal combustion generating units and generating units heat rate Chapter 3); - modified "requirements" (see Chapter 4, Chapter 5, Chapter 6, Chapter 3 of the.2008 edition); - modified fuel (see 3.4.2,.2008 version 3.1.2); - increased content in fire protection, explosion protection and safety requirements (see 5.2.3, 5.2.8); - modified the chapter and part of the "test" (see Chapter 7, Chapter 4 of the.2008 edition); - increase the calculation of the heat rate of diesel/natural gas dual fuel internal combustion generating units (see 7.4.13); - delete table 7 and table 8 (see table 7, table 8, table 8), the test items and test items into a table to form a table (see Table 6). This standard is proposed by the National Petroleum Drilling Equipment and Tools Standardization Technical Committee (SAC/TC96). The drafting unit of this standard. China Petroleum Group Ji Chai Power Plant, China Petroleum Bohai Drilling Engineering Company, CNOOC Research Institute, Baoji Oil machinery limited liability company. The main drafters of this standard. Ma Junjie, Hao Lihua, Ni Xiuyong, Li Shusheng, Xu Chuanguo, Wang Lingjin, Yu Xiaoyan, Zhang Shijuan, Lei Xiange, Wang Jianfeng, An Weizheng, Zhang Guoshan. This standard replaced the previous version of the standard release. --- GB/T 22343-2008. Natural gas generator for oil industry

1 Scope

This standard specifies the natural gas generating units for the petroleum industry (hereinafter referred to as units, including offshore drilling and production and processing platforms) Natural gas generating units) terms and definitions, technical requirements, inspection items and test methods, inspection rules, marking and packaging and storage Waiting for. This standard applies to 3kW ~ 4500kW, rated frequency of 50Hz, natural gas and diesel/natural gas as the fuel of the reciprocating internal combustion Engine (hereinafter referred to as the engine), the alternator, the control device and the auxiliary equipment. Generators with other combustible gases as fuel or units with a frequency of 60 Hz may refer to the implementation.

2 normative reference documents

The following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 191 packaging and storage icon GB 252 ordinary diesel GB/T 2820.1-2009 Reciprocating internal combustion engine driven alternators - Part 1. Uses, quotas and performance GB/T 2820.3 Reciprocating internal combustion engine driven alternators - Part 3. Generators for alternators GB/T 2820.4 Reciprocating internal combustion engine driven alternators - Part 4. Control devices and switchgear GB/T 2820.5 Reciprocating internal combustion engine driven alternators - Part 5. Generators GB/T 2820.9 Reciprocating internal combustion engine driven alternators - Part 9. Measurement and evaluation of mechanical vibration GB/T 2820.10 Reciprocating internal combustion engine driven alternators - Part 10. Measurement of noise (wrapping method) GB 3836.1 Explosive atmospheres - Part 1. General requirements GB 4556 reciprocating internal combustion engine fire protection GB/T 6072.1 Reciprocating internal combustion engine performance - Part 1. Calibration of power, fuel consumption and oil consumption and test methods Additional requirements for general purpose engines GB 11122 diesel engine oil GB/T 13306 signs Dimensions and quality limits for transport packages Test method for internal combustion engine power station GB/T .20136-2006 Safety of reciprocating internal combustion engines - Part 1. Compression - ignition engines GB 20651.1

3 terms and definitions

GB/T 6072.1, GB/T 2820.5 Definitions and the following terms and definitions apply to this document. 3.1 Natural gas generating unit naturalgasgeneratingset A generator set consisting of a reciprocating internal combustion engine, an alternator, a control device and an auxiliary device with natural gas as fuel. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22343-2015_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22343-2015_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22343-2015_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22343-2015_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 22343-2015?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22343-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.