GB/T 22195-2008 English PDF

US$474.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22195-2008: Electrical installations in ships -- Low-voltage switchgear and controlgear assemblies
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22195-2008	474	Add to Cart	4 days	Electrical installations in ships -- Low-voltage switchgear and controlgear assemblies	Valid

Similar standards

GB/T 22190   GB/T 22191   GB/T 22189   

Basic data

Standard ID: GB/T 22195-2008 (GB/T22195-2008)
Description (Translated English): Electrical installations in ships -- Low-voltage switchgear and controlgear assemblies
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: U60
Classification of International Standard: 47.020.60
Word Count Estimation: 24,215
Date of Issue: 2008-07-16
Date of Implementation: 2009-04-01
Quoted Standard: IEC 60092-101-1994; IEC 60092-202-1994; IEC 60092-504-1994; IEC 60185-1987; IEC 60363-1972; IEC 60865-1-1993
Adopted Standard: IEC 60092-302-1997, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.12 (Total No.125)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard applies to the rated frequency is not greater than 60 Hz, AC rated voltage not exceeding 1 combination device (a combination of device type test of 000 V or 1 500 V dc marine voltage switchgear and control equipment, combination device partially type-tested and non- combination device type test) for use in the marine section of IEC 60439-1 supplement.

GB/T 22195-2008: Electrical installations in ships -- Low-voltage switchgear and controlgear assemblies

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Electrical installations in ships. Low-voltage switchgear and controlgear assemblies ICS 47.020.60 U60 National Standards of People's Republic of China GB/T 22195-2008/IEC 60092-302.1997 Marine Electrical Equipment Equipment Low-voltage switchgear and control assemblies - (IEC 60092-302.1997, Electricalinstalationsinships- Part 302. Low-voltageswitchgearandcontrolgearassemblies, IDT) Posted 2008-07-16 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with IEC 60092-302.1997 "Electrical installations in ships - Part 302. Low-voltage switchgear and control equipment provided Preparation combining means "(in English). This standard is equivalent translation IEC 60092-302. For ease of use, this standard made the following editorial changes. --- "This International Standard" be replaced by "this standard"; "." --- With a decimal point instead of a comma as the decimal point, ""; --- Delete international standards preface, introduction; --- Of expression in accordance with the provisions of GB/T 1.1-2000 also been modified. Appendix A of this standard is an informative annex. The standard proposed by China State Shipbuilding Corporation. This standard by the National Standardization Technical Committee boat ocean. This standard was drafted. Technical and Economic Research Institute of China Shipbuilding Industry. The main drafters of this standard. Li Dayi, Yan Ping. GB/T 22195-2008/IEC 60092-302.1997 Marine Electrical Equipment Equipment Low-voltage switchgear and control assemblies -

1 General

1.1 Scope This standard applies to not more than the rated frequency 60Hz, rated voltage not exceeding 1000V ac or 1500V dc Marine low pressure open Combining means OFF and control devices (a combination of device type test, combining means partially type-tested and non-type testing device Set), for use in the marine section of IEC 60439-1 supplement. Note. this standard, "low-voltage switchgear and controlgear assemblies" referred to as "devices." This standard also applies to the control and power equipment joint means higher operating frequency, in this case the need to increase the applicable requirements. In addition to the provisions of the following articles, all combinations of devices and their accessories shall comply with IEC 60439-1.1999 requirements. In uncertain Case, priority should adopt this standard. 1.2 Normative references The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. In addition to IEC 60439-1.1999 external references should be cited the following documents. IEC 60092-101.1994 marine electrical equipment Part 101. Definitions and general requirements IEC 60092-202.1994 marine electrical equipment Part 202. System design protection IEC 60092-504.1994 marine electrical equipment Part 504. album control and measuring instruments IEC 60185. 1987 converter IEC 60363. 1972 Ships dedicated circuit rated short fuse short-circuit current capacity assessment IEC 60865-1. definitions and calculation methods. the effect of the short circuit current 1993 Part 1 Calculation

2 Definitions

2.1 General Requirements In IEC 60439-1.1999 based on Chapter 2, also added the following. IEC 60050 (441) and the terms and definitions given in IEC 60439-1 and the following terms and definitions apply to this standard. 2.1.1 Low-voltage switching device with one or more control, measurement, signal, protection, regulation and other equipment by the manufacturer responsible for assembling the internal device All electrical and mechanical connections overall assembly and parts of structures. 2.1.1.1 In line with possible without departing from the significant impact the performance of the system or the type established in line with this standard means test typical low-voltage switchgear Preparation and control device combination unit. 2.1.1.2 Including type testing and type testing two types of non-means, including non-type test device from the (as derived by calculating a) comply with the relevant test GB/T 22195-2008/IEC 60092-302.1997 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22195-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22195-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22195-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22195-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.