GB/T 22099-2008 English PDFUS$189.00 ยท In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 22099-2008: Identification method for biogenic acetate acid and synthetic acetate acid Status: Valid
Basic dataStandard ID: GB/T 22099-2008 (GB/T22099-2008)Description (Translated English): Identification method for biogenic acetate acid and synthetic acetate acid Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: X66 Classification of International Standard: 67.220.10 Word Count Estimation: 8,895 Date of Issue: 2008-06-25 Date of Implementation: 2009-06-01 Quoted Standard: GB/T 6682 Regulation (derived from): National Standard Approval Announcement 2008 No.11 (Total No.124) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the difference between brewing acetic acid and acetic acid synthesis methods. This standard applies to the identification and synthesis of acetic acid brewing. GB/T 22099-2008: Identification method for biogenic acetate acid and synthetic acetate acid---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Identification method for biogenic acetate acid and synthetic acetate acid ICS 67.220.10 X66 National Standards of People's Republic of China Identification of brewing acetate and acetic acid synthesis Posted 2008-06-25 2009-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordAppendix A of this standard is an informative annex. This standard by the National Standardization Technical Committee Technical Committee fermented food industry and focal points. This standard was drafted. Institute of Radiation Medicine, Fudan University, China Food Fermentation Industry Research Institute, Tian Guan Enterprise Group Co., the company. The main drafters of this standard. Zhu Guoying, Zhang Wei, Zhai school, Wang Zhiqiang, Kang Yongpu. Identification of brewing acetate and acetic acid synthesis1 ScopeThis standard specifies the difference between brewing and acetic acid synthesis methods. This standard applies to identify brewing acetate and acetic acid synthesis.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 6682 analytical laboratory use specifications and test methods (GB/T 6682-2008, ISO 3696. 1987, MOD)3 Terms and DefinitionsThe following terms and definitions apply to this standard. 3.1 In cereal grains, potatoes, fruits and other raw materials, produced by fermentation obtained acetic acid (glacial acetic acid). 3.2 In hydrocarbon acetylene, ethylene, methanol and other petrochemical products as raw materials, synthetic production obtained in acetic acid (glacial acetic acid). Principle 4 Brewing acetic 14C content is stable within a certain range, while a large number of synthetic acetic acid 14C decay, only a trace remaining. based on Carbon isotope 14C content in brewing and acetic acid in the synthesis is significantly different measured 14C content of acetic acid by liquid scintillation method to brewing 14C is made of acetic acid 100 acetic acid synthesis is 0,14C 14C content in a mixture of both in their intermediate values \u200b\u200bcan be measured both quantitatively The ratio, as a method of identification.5 Reagents and solutions5.1 toluene scintillation solution. Weigh 2,5-diphenyl oxazole 4g \u200b\u200b(PPO, flashing pure) and bis [2- (5-phenyl-oxazolyl)] benzene (POPOP, blinking Pure) 0.1g, dissolved with toluene and dilute to 1000mL. 5.2 Internal standard sources. 5.2.1 Standard sources. carbon-14 (n-hexadecane) standard solution (GB WO4319, a), activity/concentration 39075Bq/g. 5.2.2 preparation. Weigh 1g standard radioactive source (accurate to 0.0001g), with toluene and dilute to 500mL, and calculated per ml of toluene Standard radioactive content (dpm/mL). 5.3 toluene. 5.4 Brewing acetate standard. 5.5 Synthesis of acetic acid standard.6 Instruments6.1 low background liquid scintillation analyzer. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 22099-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 22099-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 22099-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22099-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
