GB/T 22095-2008 English PDF

US$274.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22095-2008: Cast iron surface plates
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22095-2008	274	Add to Cart	3 days	Cast iron surface plates	Valid

Similar standards

GB/T 40742.1   GB/T 22092   GB/T 26093   GB/T 22093   GB/T 22091.1   

Basic data

Standard ID: GB/T 22095-2008 (GB/T22095-2008)
Description (Translated English): Cast iron surface plates
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J42
Classification of International Standard: 17.040.30
Word Count Estimation: 14,172
Date of Issue: 2008-06-25
Date of Implementation: 2009-01-01
Quoted Standard: GB/T 9439; GB/T 17164
Adopted Standard: ISO 8512-1-1990, IDT
Regulation (derived from): National Standard Approval Announcement 2008 No.11 (Total No.124)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the level of accuracy is 0, 1, 2 and 3, sizes ranging from 160 mm to 2500 mm �� 100 mm �� 1600 mm rectangular and square cast iron plate requirements. This standard applies to the new system, in use, , and repaired to the original level of the cast iron plate.

GB/T 22095-2008: Cast iron surface plates

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Cast iron surface plates ICS 17.040.30 J42 National Standards of People's Republic of China GB/T 22095-2008/ISO 8512-1.1990 Cast iron plate (ISO 8512-1.1990, Surfaceplates-Part 1. Castiron, IDT) Posted 2008-06-25 2009-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

This standard is identical with ISO 8512-1.1990 "plate - Part 1. Cast Iron" (in English). This standard ISO 8512-1.1990 Chapter 3, Chapter 4 edition merged into Chapter 3, and the remaining 5 to 12 chapters corresponding change-oriented Version 4 to 11. Since the implementation of this standard, the abolition of JB/T 7974-1999 "cast iron plate." This standard Annex A, Annex B, Annex C and Annex D are informative appendices. The standard proposed by China Machinery Industry Federation. The standard measuring instrument by the National Standardization Technical Committee (SAC/TC132) centralized. This standard was drafted. China Institute of Metrology, Chengdu Tool Institute. The main drafters of this standard. Zhao Jun, Jiang Zhigang, Chen Yu. GB/T 22095-2008/ISO 8512-1.1990 Cast iron plate

1 Scope

This standard specifies the accuracy classes 0,1,2 and 3 sizes ranging from 160mm × 100mm to 2500mm × 1600mm Rectangular and square iron plate requirements. This standard applies to the new system, in use, and is restored to the original level of the cast iron plate (hereinafter referred to as "flat").

2 Normative references

The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 94391) gray iron castings GB/T 17164 dimensional measuring instruments - Product terms

3 Terms and Definitions

GB/T 17164 in established, and the following terms and definitions are shown in Figure 1 applies to this standard. 3.1 Face inclusive minimum distance between two parallel planes.

1 term

1) GB/T 9439-1988 "gray cast iron" was amended principles. modification using ISO 185. 1988. GB/T 22095-2008/ISO 8512-1.1990 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22095-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22095-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22095-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22095-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.