GB/T 22085.2-2008 PDF EnglishUS$135.00 · In stock · Download in 9 seconds
GB/T 22085.2-2008: Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure Status: Valid
Similar standardsGB/T 22085.2-2008: Electron and laser beam welded joints -- Guidance on quality levels for imperfections -- Part 2: Aluminium and its weldable alloys---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT22085.2-2008 GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 25.160.40 J 33 GB/T 22085.2-2008 / ISO 13919-2:2001 Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections – Part 2: Aluminum and Its Weldable Alloys (ISO 13919-2:2001, Welding – Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections – Part 2: Aluminum and Its Weldable Alloys, IDT) ISSUED ON: JUNE 26, 2008 IMPLEMENTED ON: JANUARY 1, 2009 Issued by: General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration of the People’s Republic of China. Table of ContentsForeword ... 3 1 Scope ... 4 2 Normative References ... 4 3 Symbols... 4 4 Evaluation of Welds ... 5 Annex A (Normative) Guidance for Standard Application ... 13ForewordGB/T 22085 Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections consists of the following two parts: --- Part 1: Steel; --- Part 2: Aluminum and its weldable alloy. This Part is Part 2 of GB/T 22085. This Part equivalently adopts ISO 13919-2:2001 Welding – Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections – Part 2: Aluminum and its Weldable Alloys (English Version). This Part equivalently translated ISO 13919-2:2001. For the benefit of use, this Part made the following editorial modifications: --- Delete the Foreword of the international standard; --- Change the standard name into Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections – Part 2: Aluminum and its Weldable Alloy; --- For other international standards cited in ISO 13919-2:2001, if they are equivalently adopted as Chinese standards, the corresponding international standards will be replaced by Chinese standards; --- Combine the “Instructions” of ISO 13919-2:2001 into Annex A. The Annex A of this Part is informative. This Part was proposed by and under the jurisdiction of National Technical Committee on Welding of Standardization Administration of China. Drafting organizations of this Part: Harbin Welding Institute. Chief drafting staffs of this Part: Pu Dongguang, Wang Xuyou, Lei Zhen, and Wang Wei. Electron and Laser Beam Welded Joints – Guidance on Quality Levels for Imperfections – Part 2: Aluminum and Its Weldable Alloys1 ScopeThis Part of GB/T 22085 specifies guidance on levels of imperfections in electron and laser beam welded joints in aluminum and its alloys. This Part applies to the aluminum and its alloys with thickness of 1mm above.2 Normative ReferencesThe provisions in following documents become the provisions of this Standard through reference in this Part of GB/T 22085. For dated references, the subsequent amendments (excluding corrigendum) or revisions do not apply to this Part, however, parties who reach an agreement based on this Part are encouraged to study if the latest versions of these documents are applicable. For undated references, the latest edition of the referenced document applies. GB/T 6417.1-2005 Classification and explanation of imperfections in fusion welded joints (ISO 6520-1:1998, IDT) GB/T 22087-2008 Arc-welded Joints in Aluminum and its Alloys—Guidance on Quality Levels for Imperfection (ISO 10042:2005, IDT)3 SymbolsThe following symbols are used in Table 1: ΔL: distance between two imperfections (pore, cavity); b - width of weld; br - width of weld root d - maximum size of an imperfection (pore, cavity); ......Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al. Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of English version of GB/T 22085.2-2008 be delivered?Answer: The full copy PDF of English version of GB/T 22085.2-2008 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.Question 2: Can I share the purchased PDF of GB/T 22085.2-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 22085.2-2008_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 22085.2-2008 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.How to buy and download a true PDF of English version of GB/T 22085.2-2008?A step-by-step guide to download PDF of GB/T 22085.2-2008_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).Step 2: Search keyword "GB/T 22085.2-2008". Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart. Step 4: Select payment option (Via payment agents Stripe or PayPal). Step 5: Customize Tax Invoice -- Fill up your email etc. Step 6: Click "Checkout". Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively. Step 8: Optional -- Go to download PDF. Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice. See screenshots for above steps: Steps 1~3 Steps 4~6 Step 7 Step 8 Step 9 |
