GB/T 22063-2018 English PDF

US$119.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 22063-2018: Microscopes -- Interfacing connection type C
Status: Valid

GB/T 22063: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 22063-2018	119	Add to Cart	3 days	Microscopes -- Interfacing connection type C	Valid
GB/T 22063-2008	279	Add to Cart	3 days	Microscopes -- Interfacing connection type C	Obsolete

Similar standards

GB/T 17360   GB/T 22062   GB/T 32387   GB/T 22055   

Basic data

Standard ID: GB/T 22063-2018 (GB/T22063-2018)
Description (Translated English): Microscopes -- Interfacing connection type C
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: N32
Classification of International Standard: 37.020
Word Count Estimation: 6,698
Date of Issue: 2018-12-28
Date of Implementation: 2019-07-01
Older Standard (superseded by this standard): GB/T 22063-2008
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 22063-2018: Microscopes -- Interfacing connection type C

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Microscopes--Interfacing connection type C ICS 37.020 N32 National Standards of People's Republic of China Replace GB/T 22063-2008 Microscope C-type interface (ISO 10935.2009, MOD) Published on.2018-12-28 2019-07-01 implementation State market supervision and administration China National Standardization Administration issued

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 22063-2008 "Microscope C-type interface". The main changes compared with GB/T 22063-2008 are as follows. --- Added Chapter 2 normative references; --- The terminology in Chapter 2 of the original standard is a specification of terms, with the addition of "components" at the end of the term. This standard uses the redrafting method to modify the use of ISO 10935.2009 "microscope C-type interface." There are technical differences between this standard and ISO 10935.2009, and the terms involved in these differences have been passed through the margins on the outer side of the page. The vertical single line (|) is marked. The main technical differences between this standard and ISO 10935.2009 are as follows. ---About the normative reference documents, this part has made technical adjustments to adapt to China's technical conditions, specific The national standards are as follows. ● Removed ISO 263.1973; ● Replace ISO 10934-1 with GB/T 27668.1 modified to international standards. --- Delete the description in Figure 1, Figure 2, the description will be directly marked on Figure 1 and Figure 2, in line with China's optical mapping requirements. --- Removed the "open size" annotation in Figure 1 of Chapter 4 to increase operability. This standard was proposed by the China Machinery Industry Federation. This standard is under the jurisdiction of the National Optical and Photonics Standardization Technical Committee (SAC/TC103). This standard is mainly drafted by. Ningbo Teaching Instrument Co., Ltd., Shanghai Institute of Technology, Ningbo Zhanjing Optical Instrument Co., Ltd., Nanjing Donglilai Optoelectronic Industry Co., Ltd., Nanjing Jiangnan Yongxin Optical Co., Ltd., McAudi Industrial Group Co., Ltd., Luzhou Oka Optical Instrument Co., Ltd., Guangzhou Yuexian Optical Instrument Co., Ltd., Ningbo Yongxin Optical Co., Ltd., Ningbo Haoyu Instrument Co., Ltd., Ning Bohuaguang Precision Instrument Co., Ltd. The main drafters of this standard. Wang Guorui, Huang Weijia, Zhang Huixian, Xiong Shouyu, Hong Yiping, Li Wei, Zhang Guangwei, Zhang Wei, Xu Tao, Mao Lei, Hu Senhu, Cui Zhiying, Xu Liming. The previous versions of the standards replaced by this standard are. ---GB/T 22063-2008. Microscope C-type interface

1 Scope

This standard specifies the thread size and initial image of the C-type interface that connects the microscope imaging exit (except for the single-tube or binocular tube). position. This standard applies to microscopes other than monocular or binocular tubes.

2 Normative references

The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article. Pieces. For undated references, the latest edition (including all amendments) applies to this document. GB/T 27668.1 Microscopy terminology Part 1. Optical microscopy (GB/T 27668.1-2011, ISO 10934-1.2002, MOD)

3 Terms and definitions

The following terms and definitions as defined in GB/T 27668.1 apply to this document. 3.1 Interface component malecomponent Mount the components of the video or image adapter on the end face of the microscope imaging exit. 3.2 Matching component femalecomponent Insert the component of the video or image adapter into the exit end of the microscope.

4 requirements

The dimensions of the interface components are shown in Figure 1; the dimensions of the mating components are shown in Figure 2. The position of the first image plane is shown in Figures 1 and 2. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 22063-2018_English be delivered?

Answer: Upon your order, we will start to translate GB/T 22063-2018_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 22063-2018_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 22063-2018_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 22063-2018?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 22063-2018 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.