GB/T 21782.14-2010 English PDF

US$114.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 21782.14-2010: Coating powders -- Part 14: Terminology
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 21782.14-2010	114	Add to Cart	3 days	Coating powders -- Part 14: Terminology	Valid

Similar standards

GB/T 23987   GB/T 23988   GB/T 23986   GB/T 21782.5   GB/T 21782.9   GB/T 21782.12   

Basic data

Standard ID: GB/T 21782.14-2010 (GB/T21782.14-2010)
Description (Translated English): Coating powders -- Part 14: Terminology
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: G50
Classification of International Standard: 87.040
Word Count Estimation: 6,676
Date of Issue: 2010-09-26
Date of Implementation: 2011-08-01
Adopted Standard: ISO 8130-14-2004, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 6 of 2010 (total 161)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the terms of powder coatings, paints and varnishes and other relevant terms and as defined in ISO 4618 (Paints and varnishes Terms and definitions),

GB/T 21782.14-2010: Coating powders -- Part 14: Terminology

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Coating powders Part 14. Terminology ICS 87.040 G50 National Standards of People's Republic of China Powder Coatings Part 14. Terminology Coatingpowders- Part 14. Terminology (ISO 8130-14.2004, IDT) Issued on. 2010-09-26 2011-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 21782 "powder coating" is composed of 14 parts, the structure and corresponding international standards are as follows. --- Part 1. Determination of particle size distribution by sieving (ISO 8130-1.1992, IDT); --- Part 2. Comparison of the proportion of instrument gas density determination (ISO 8130-2.1992, IDT); --- Part 3. Determination of liquid displacement pycnometer density (ISO 8130-3.1992, IDT); --- Part 4. lower explosion limit calculations (ISO 8130-4.1992, IDT); --- Part 5. Powder air mixture flow measurement (ISO 8130-5.1992, IDT); Measured at a given temperature thermosetting powder coating of gel time (ISO 8130-6..1992, IDT) --- Part 6; --- Part 7. Determination (ISO 8130-7.1992, IDT) mass loss during baking; --- Part 8. Evaluation of the storage stability of thermosetting powders (ISO 8130-8.1994, IDT); --- Part 9. Sampling (ISO 8130-9.1992, IDT); --- Part 10. Determination of deposition efficiency (ISO 8130-10.1998, IDT); --- Part 11. Determination of flow inclined plate (ISO 8130-11.1997, IDT); --- Part 12. Determination of compatibility (ISO 8130-12.1998, IDT); --- Part 13. Laser diffraction particle size analysis (ISO 8130-13.2001, IDT); --- Part 14. Terminology (ISO 8130-14.2004, IDT). This section GB/T 21782 Part 14. This section uses the translation method identical with ISO 8130-14.2004 "powder coating Part 14. Terminology." For ease of use of ISO 8130-14.2004 in this section do major editorial changes as follows. --- With "this Part" instead of "ISO 8130 part of this"; --- Delete international standards foreword. This part is proposed by the China Petroleum and Chemical Industry Association. This part of the National Standardization Technical Committee and the pigment coating (SAC/TC5) centralized. Drafting this Part. Guangdong CIQ, CNOOC Changzhou coating Chemical Research Institute. The main drafters of this section. Chengu Feng, Zhao Ling, Chen Qiang, Chen Wenjie, Di Cuiping, Lee Jun, Lin Hongxiong, Zheng Jianguo. Powder Coatings Part 14. Terminology

1 Scope

This section GB/T 21782 specifies the terms of powder coatings. Other terms and definitions of paints and varnishes, see ISO 4618 "Paints and varnishes - Terms and definitions."

2 Terms and definitions

2.1 Caking agglomation A plurality of individual particles are bonded together to form larger aggregates of the case. 2.2 Anti-ionization backionization Electrostatic repulsion electrostaticrejection/repulsion Excessive charge accumulation caused by electrostatic deposition powder in medium breakdown. NOTE. This phenomenon is related with the coating rupture, resulting in the coating surface defects resulting in the entire film appears damaged. 2.3 Charge to mass ratio of charge-to-massratio Rate charge on its quality powder coatings. NOTE. In order to achieve the requirements of the powder coating during coating, powder particles of charge to mass ratio of at least 10-4C · kg-1. 2.4 Grading classification The powder coating sample was divided into two parts, a part on a predetermined particle size, and partly beneath it. 2.5 Powder Coating coatingpowder Good dispersion state of thermoplastic or thermosetting resin particles, usually a mixture of pigments, fillers and additives, under appropriate storage conditions Still maintain state breakdown, after melting and solidifying to form a continuous film. 2.6 Compaction compaction Agglomerated particles formed under pressure. 2.7 Deposition efficiency depositionefficiency The ratio of the powder mass is deposited on a substrate with a powder spray quality. 2.8 Electrostatic fluidized bed electrostaticfluidizedbed It can make a powder sample stream of charged particles while allowing the device. 2.9 Electrostatic repulsion electrostaticrejection See 2.2 deionization. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 21782.14-2010_English be delivered?

Answer: Upon your order, we will start to translate GB/T 21782.14-2010_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 21782.14-2010_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 21782.14-2010_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.