GB/T 21662-2008 English PDFUS$169.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 21662-2008: Quick testing method and evaluation for plastic shopping bags Status: Valid
Basic dataStandard ID: GB/T 21662-2008 (GB/T21662-2008)Description (Translated English): Quick testing method and evaluation for plastic shopping bags Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y28 Classification of International Standard: 83.140.01 Word Count Estimation: 7,758 Date of Issue: 2008-04-16 Date of Implementation: 2008-06-01 Quoted Standard: GB 21660-2008; GB/T 21661-2008 Regulation (derived from): National Standard Approval Announcement 2008 No.4 (Total No.117) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the plastic shopping bag sampling, senses, identity, combined length width deviation, , bearing performance Cooperative rapid detection methods and evaluation thickness. This standard applies to the resin as the main raw materials to produce the film, such as by heat sealing or adhesive bag processing technology to obtain plastic shopping bags. This standard is also applicable to other materials, composite plastics and shopping bags. This standard applies only to plastic shopping bags on-site rapid testing and evaluation, does not apply to plastic shopping bags arbitration inspection, routine quality control and inspection type. GB/T 21662-2008: Quick testing method and evaluation for plastic shopping bags---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Quick testing method and evaluation for plastic shopping bags ICS 83.140.01 Y28 National Standards of People's Republic of China Rapid detection methods and evaluation of plastic shopping bags Posted 2008-04-16 2008-06-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThe standard proposed by China National Light Industry Council. This standard by the National Standardization Technical Committee of plastic products. This standard by the Shenzhen Dajie Plastics Co., Ltd., Shenzhen Junhao Plastic Products Co., Ltd., Shenzhen City, the best plastic products Ltd., Shenzhen City is Wang Plastic Products Co., Ltd., light industry Institute of Plastics Processing Applications, Zhejiang Wafa Ecosystem Science & Technology Co., Ltd., Huizhou Junhao Plastic Development Co., Ltd., National Plastic Products Quality Supervision and Inspection Center (Beijing) drafted. The main drafters of this standard. Chen Qian, Chen Jiaqi, Wengyun Xuan, Li meaning, Wei Wenchang, Su Junming, Zheng Hong standard, Zhang Jian Hong, Shen Huafeng. Rapid detection methods and evaluation of plastic shopping bags1 ScopeThis standard specifies the sample, sensory, logo, thickness, width and length deviation of plastic shopping bags, load-bearing properties and evaluation of rapid detection side Method and evaluation. This standard applies to the resin as the main raw materials to produce films by heat sealing or gluing, etc. processing technology obtained bag plastic shopping bags. This standard is also applicable to other materials, composite plastics and shopping bags. This standard applies only to plastic shopping bags and evaluation of on-site rapid test does not apply to plastic shopping bags arbitration inspection, routine quality control And type inspection.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB 21660-2008 plastic shopping bags of environmental protection, safety and general technical requirements identified GB/T 21661-2008 plastic shopping bags3 SamplingSamples from the use of plastic shopping bags or storage place randomly selected, the number shown in Table 1. Table 1 is a sampling Number of Units Sampling base number of samples ≤15 3 16 to 255 26 - 508 51 to 9013 91 to 15020 151 to 28032 281 to 50050 ≥501 804 senses4.1 Test Method Visual appearance of plastic shopping bags in natural light. Visual plastic shopping bags printed pattern and text is complete. Open the plastic shopping bags, there is no smell its odor. 4.2 Requirements Bag film should be uniform, smooth, there should not impede the use of the bubble, the perforations (not including the holes), wrinkles (not including normal folding folding, etc. Cause crease) and other defects. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 21662-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 21662-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 21662-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 21662-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay. |
