GB/T 2103-2008 English PDFUS$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 2103-2008: General requirements for acceptance, packing, marking and quality certification of steel wire Status: Valid GB/T 2103: Historical versions
Basic dataStandard ID: GB/T 2103-2008 (GB/T2103-2008)Description (Translated English): General requirements for acceptance, packing, marking and quality certification of steel wire Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: H49 Classification of International Standard: 77.140.65 Word Count Estimation: 8,855 Date of Issue: 2008-08-19 Date of Implementation: 2009-04-01 Older Standard (superseded by this standard): GB/T 2103-1988 Quoted Standard: GB/T 4879-1999; YB/T 025-2002; YB/T 5294-2006; JB/T 6067-1999; JB/T 6071; QB/T 1319; SH/T 0692-2000 Regulation (derived from): National Standard Approval Announcement 2008 No.14 (Total No.127) Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the wire acceptance rules, packaging, signs, quality certificates and storage and transportation. This standard applies to wire acceptance, packaging, General requirements and certification mark, when otherwise specified wire products standards, should be the appropriate product standards regulations. GB/T 2103-2008: General requirements for acceptance, packing, marking and quality certification of steel wire---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order. General requirements for acceptance, packing, marking and quality certification of steel wire ICS 77.140.65 H49 National Standards of People's Republic of China Replacing GB/T 2103-1988 Wire acceptance, packaging, marking and The general provisions of the quality certificate Posted 2008-08-19 2009-04-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released ForewordThis standard replaces GB/T 2103-1988 "wire acceptance, packaging, marking and general provisions certificate." This standard compared with GB/T 2103-1988, the main changes are as follows. --- Other than quality steel wire, tightened shape, size and number of surface inspection; --- Mechanical properties of the sample changes in the number of high-quality steel wire by the decimation of 10% revised to 5%; --- Type of packaging changes by Ⅰ, Ⅱ, Ⅱc, Ⅲ, Ⅳ and Ⅴ total of 6, is amended as A ~ G 7 species; Changes --- Package Name of the moisture, rust and oil VCI packaging merged into rust-proof packaging; --- Packing method changes, modifications of the rust-proof packaging protective packaging and packaging, with no increase in the mandrel or mandrel with a close-packed layer wrapped Equipment, packaging and tape spools bobbin package; --- Modify the straight wire tying pass; --- Changes in packaging materials, tying wire and wire general quality steel wire and steel strapping requirements, combined into uncoated wire Claim; --- Increase the packing method (see Appendix A). Appendix A of this standard is an informative annex. The standard proposed by China Iron and Steel Association. This standard is under the jurisdiction of the National Steel Standardization Technical Committee. This standard is mainly drafted by. Dongbei Special Steel Group Co., Ltd., Metallurgical Industry Information Standards Institute, Guizhou Wire Rope shares have Ltd., Baosteel Group Shanghai-Steel Limited. The main drafters of this standard. XU Xiao Qian, really Juan, Wang Lingjun, Daishi Feng, YANG Hong-ying, Zhou Yi. This standard replaces the standards previously issued as follows. --- GB 2103-1980, GB/T 2103-1988. Wire acceptance, packaging, marking and The general provisions of the quality certificate1 ScopeThis standard specifies the wire acceptance rules, packaging, labeling, quality certificate and storage and transportation. General requirements of this standard applies to the wire acceptance, packaging, marking and quality certification, when otherwise specified wire products standards, should phase Product standards should perform.2 Normative referencesThe following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard. GB/T 4879-1999 rust-proof packaging YB/T 025-2002 packaging strip YB/T 5294-2006 general purpose low carbon steel wire JB/T 6067-1999 VCI plastic film JB/T 6071 VCI agents QB/T 1319 VCI paper SH/T 0692-2000 anti-rust oil3 Acceptance rules3.1 inspection and acceptance 3.1.1 wire inspection and acceptance carried out by the supplier quality supervision departments. 3.1.2 The supplier must guarantee delivery of steel to meet the requirements of the relevant product standards and contracts. Demand side is entitled to appropriate product standards and contracts Requirements for acceptance. 3.2 Batch rules Wire should be batch acceptance. Each batch of steel by the same grade, the same heat (or the same production batch), the same shape, the same size and the same Wire delivery status of components. 3.3 Number of Samples 3.3.1 The number of samples of steel products shall comply with the appropriate standards. 3.3.2 If the product standard does not specify the number of samples, press the following provisions. Wire should by disk shape, size and surface inspection. Extracts from 5% pass the inspection of steel wire, but not less than three, the mechanical performance test and other tests. 3.4 reinspection and decision rules During the inspection, if a particular test results do not meet the requirements of the product standard or contract, the disc can not be delivered. And from the same group of companies Test wire intraday take double the number of samples failed the retest item (including any indicators that tests required), reinspection Results Even with a specimen fails, the whole batch shall not be delivered, but allows for the batch-by-plate test, qualified products allow delivery. supplier Reinspection can be classified substandard steel machining (including heat treatment), the resubmitted acceptance. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 2103-2008_English be delivered?Answer: Upon your order, we will start to translate GB/T 2103-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 2103-2008_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2103-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 2103-2008?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2103-2008 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
