Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 20975.5-2020 English PDF

US$189.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20975.5-2020: Methods for chemical analysis of aluminium and aluminium alloys - Part 5: Determination of silicon content
Status: Valid

GB/T 20975.5: Historical versions

Standard IDUSDBUY PDFLead-DaysStandard Title (Description)Status
GB/T 20975.5-2020189 Add to Cart 3 days Methods for chemical analysis of aluminium and aluminium alloys - Part 5: Determination of silicon content Valid
GB/T 20975.5-2008559 Add to Cart 3 days Methods for chemical analysis of aluminium and aluminium alloys -- Part 5: Determination of silicon content Obsolete

Similar standards

GB/T 20975.29   GB/T 20975.28   GB/T 20975.30   GB/T 20975.13   GB/T 20975.14   GB/T 20975.12   

Basic data

Standard ID: GB/T 20975.5-2020 (GB/T20975.5-2020)
Description (Translated English): Methods for chemical analysis of aluminium and aluminium alloys - Part 5: Determination of silicon content
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H12
Classification of International Standard: 77.120.10
Word Count Estimation: 10,164
Date of Issue: 2020-06-02
Date of Implementation: 2021-04-01
Older Standard (superseded by this standard): GB/T 20975.5-2008
Quoted Standard: GB/T 8005.2; GB/T 8170-2008
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration
Summary: This standard specifies the molybdenum blue spectrophotometric and gravimetric methods for the determination of silicon content in aluminum and aluminum alloys. This standard applies to the arbitration determination of silicon content in aluminum and aluminum alloys. Molybdenum blue spectrophotometric determination range: 0.0010% to 15.00%; gravimetric determination range: 10.00% to 63.00%.

GB/T 20975.5-2020: Methods for chemical analysis of aluminium and aluminium alloys - Part 5: Determination of silicon content


---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Methods for chemical analysis of aluminium and aluminium alloys--Part 5.Determination of silicon content ICS 77.120.10 H12 National Standards of People's Republic of China Replace GB/T 20975.5-2008 Chemical analysis methods of aluminum and aluminum alloys Part 5.determination of silicon content 2020-06-02 released Implementation on 2021-04-01 State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

GB/T 20975 "Methods for Chemical Analysis of Aluminum and Aluminum Alloys" is divided into 37 parts. ---Part 1.Determination of mercury content; ---Part 2.Determination of arsenic content; ---Part 3.Determination of copper content; ---Part 4.Determination of iron content; ---Part 5.Determination of silicon content; ---Part 6.Determination of cadmium content; ---Part 7.Determination of manganese content; ---Part 8.Determination of zinc content; ---Part 9.Determination of lithium content by flame atomic absorption spectrometry; ---Part 10.Determination of tin content; ---Part 11.Determination of lead content; ---Part 12.Determination of titanium content; ---Part 13.Determination of vanadium content; ---Part 14.Determination of nickel content; ---Part 15.Determination of boron content; ---Part 16.Determination of magnesium content; ---Part 17.Determination of strontium content; ---Part 18.Determination of chromium content; ---Part 19.Determination of Zirconium Content; ---Part 20.Determination of Gallium Content Butyl Rhodamine B Spectrophotometry; ---Part 21.Determination of calcium content; ---Part 22.Determination of beryllium content; ---Part 23.Determination of antimony content; ---Part 24.Determination of total rare earth content; ---Part 25.Determination of element content by inductively coupled plasma atomic emission spectrometry; ---Part 26.Determination of carbon content by infrared absorption method; ---Part 27.Determination of cerium, lanthanum and scandium content by inductively coupled plasma atomic emission spectrometry; ---Part 28.Determination of cobalt content by flame atomic absorption spectrometry; ---Part 29.Determination of molybdenum content thiocyanate spectrophotometric method; ---Part 30.Determination of hydrogen content by heating extraction thermal conductivity method; ---Part 31.Determination of phosphorus content molybdenum blue spectrophotometric method; ---Part 32.Determination of Bismuth Content; ---Part 33.Determination of potassium content by flame atomic absorption spectrometry; ---Part 34.Determination of sodium content by flame atomic absorption spectrometry; ---Part 35.Determination of Tungsten Content Thiocyanate Spectrophotometric Method; ---Part 36.Determination of silver content by flame atomic absorption spectrometry; --- Part 37.Determination of Niobium Content. This part is Part 5 of GB/T 20975. This section was drafted in accordance with the rules given in GB/T 1.1-2009. This section replaces GB/T 20975.5-2008 "Methods for Chemical Analysis of Aluminum and Aluminum Alloys Part 5.Determination of Silicon Content". versus Compared with GB/T 20975.5-2008, the main technical changes except for editorial changes are as follows. --- Added standard use safety warnings; ---Modified the measurement range, from 0.0010%~0.40% to 0.0010%~15%, and from 0.30%~25% to 15.00%~25.00% and 10.00%~50.00% (see Chapter 1, Chapter 1 of the.2008 edition); --- Added "Normative Reference Documents" (see Chapter 2); --- Added "Terms and Definitions" (see Chapter 3); ---Modified the weighing table (see 4.5.1, 5.5.1, 6.1, 15.1.1, 15.1.3 of the.2008 edition); ---Modified the precision (see 4.7 and 5.7, see Chapter 8 and Chapter 17 of the.2008 edition); --- Modify the sample dissolving method of Method 2 (see 5.5.4.1, 5.5.4.2, 15.4.1, 15.4.3 of the.2008 edition); --- Deleted "quality control and assurance" (see Chapter 9 and Chapter 18 of the.2008 edition); --- Added "Test Report" (see Chapter 6). This part was proposed by China Nonferrous Metals Industry Association. This part is under the jurisdiction of the National Nonferrous Metals Standardization Technical Committee (SAC/TC243). Drafting organizations of this section. Kunming Metallurgical Research Institute, Non-ferrous Metals Technology and Economic Research Institute, Northeast Light Alloy Co., Ltd., Changsha Mining and Metallurgy Research Institute Co., Ltd., Guizhou Institute of Analysis and Testing, Inner Mongolia Jinlian Aluminum Co., Ltd., Xi'an Hantang Analysis and Testing Co., Ltd., Shandong Nanshan Aluminum Co., Ltd., Jiangsu Haoran Spray Forming Alloy Co., Ltd. The main drafters of this section. Liu Yingbo, Yang Yunjin, Liu Weili, Xi Huan, Zhou Bing, Wang Yue, Yuan Bo, Yuan Jianchang, Wang Xinkai, Zhang Ning, Zhang Hao, Yang Yi, Zhao Deping, Wang Jinrong, Li Wenzhi, Zhou Ting, Zhu Shaoyan, Wu Qingchun. The previous versions of the standards replaced by this part are as follows. ---GB/T 6987.5-1986, GB/T 6987.5-2001; ---GB/T 6987.6-1986, GB/T 6987.6-2001; ---GB/T 20975.5-2008. Chemical analysis methods of aluminum and aluminum alloys Part 5.determination of silicon content Warning---Personnel using this section should have practical experience in formal laboratory work. This section does not point out all possible safety issues question. The user is responsible for taking appropriate safety and health measures and ensuring compliance with the conditions stipulated by relevant national laws and regulations.

1 Scope

This part of GB/T 20975 specifies the molybdenum blue spectrophotometric method and gravimetric method for the determination of silicon content in aluminum and aluminum alloys. This section applies to the arbitration determination of silicon content in aluminum and aluminum alloys. Molybdenum blue spectrophotometric determination range. 0.0010%~15.00%; Gravimetric measurement range. 10.00%~63.00%. Note. When the silicon mass fraction is >10.00%~15.00%, the weight method is used as the arbitration method.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. GB/T 8005.2 Terminology of Aluminum and Aluminum Alloy Part 2.Chemical Analysis GB/T 8170-2008 Numerical rounding rules and the expression and determination of limit values

3 Terms and definitions

The terms and definitions defined in GB/T 8005.2 apply to this document.

4 Molybdenum blue spectrophotometry

4.1 Method summary The sample is dissolved with sodium hydroxide and hydrogen peroxide, acidified with nitric acid and hydrochloric acid, and molybdate and silicon are used to form silicomolybdenum heteropolyacid (pH value is about 0.9), increase the acidity with sulfuric acid, reduce with 1-amino-2-naphthol-4-sulfonic acid or ascorbic acid to reduce the silicomolybdenum heteropoly acid to silicomolybdenum blue. The absorbance is measured at the wavelength of 650.0nm~810.0nm with the photometer to determine the silicon content. 4.2 Reagents Unless otherwise stated, only reagents and laboratory secondary water confirmed to be analytically pure are used in the analysis. 4.2.1 Hydrogen peroxide (ρ=1.10g/mL). 4.2.2 Nitric acid (about 8mol/L). Pipette 540mL of nitric acid (ρ=1.42g/mL) into a beaker containing about.200mL of water, shake well, and cool. However, transfer it to a 1000mL volumetric flask, dilute to the mark with water, and mix. 4.2.3 Sodium hydroxide (about 8mol/L). Weigh 320g of sodium hydroxide into a beaker, add about 400mL of water, shake well, cool, and transfer In a 1000mL polyethylene volumetric flask, dilute to the mark with water and mix well. 4.2.4 Hydrochloric acid (about 4.4mol/L). Pipette 352mL of hydrochloric acid (ρ=1.19g/mL) into a beaker containing about.200mL of water, shake well, and cool. However, transfer it to a 1000mL volumetric flask, dilute to the mark with water, and mix. 4.2.5 Nitric acid (1 1). 4.2.6 Ammonia (1 1). 4.2.7 Sulfuric acid (1 2). 4.2.8 Tartaric acid solution (200g/L). 4.2.9 Reduction solution. ---1-Amino-2-naphthol-4-sulfonic acid solution (1.5g/L). Weigh 7g of anhydrous sodium sulfite, 1.5g 1-amino-2-naphthol-4-sulfonic acid in In a 250mL beaker, add 100mL of water and stir until completely dissolved; in addition, weigh 90g of sodium metadisulfite in 1000mL In the cup, add 600mL of water to slightly heat to dissolve. Mix these two solutions and filter them in a 1000mL volumetric flask with medium-speed quantitative filter paper Dilute to the mark with water and mix well. Transfer to a brown bottle. The validity period is 1 month. ---Ascorbic acid solution (20g/L), ready when used. 4.2.10 Ammonium molybdate solution (100g/L). Dissolve 50g of ammonium molybdate [(NH4)6Mo7O24·4H2O] in 250mL of water and add 30mL sodium hydroxide (4.2.3) mix well and cool. Dilute with water to 350mL, add sodium hydroxide (4.2.3) dropwise to adjust the solution under constant stirring To about pH 7.2 (check with acidity meter); filter in a 500mL volumetric flask, wash with water and dilute to the mark, and mix. Stored in polyethylene In the bottle. 4.2.11 Sodium sulfite solution (100g/L). 4.2.12 Silicon standard storage solution. Use a certified standard solution to prepare. Or weigh 0.2140g silica (wSiO2≥99.99%), Place in a platinum crucible, add 1g of anhydrous sodium carbonate, and mix well. Heat at 1000℃ until it melts completely, cool, dissolve in water, transfer to 1000mL volume Dilute to the mark with water in a measuring bottle and store in a polyethylene bottle. 1mL of this solution contains 0.1mg of silicon. 4.2.13 Silicon standard solution A. Pipette 50.00mL silicon standard stock solution (4.2.12) into a 250mL volumetric flask, dilute to the mark with water, Mix well. Store in a polyethylene bottle. 1mL of this solution contains 0.02mg of silicon. 4.2.14 Silicon standard solution B. Pipette 20.00mL silicon standard stock solution (4.2.12) into a 500mL volumetric flask and dilute to the mark with water. Mix well. Store in a polyethylene bottle. 1mL of this solution contains 0.004mg of silicon. 4.2.15 p-nitrophenol solution (5g/L). 4.3 Apparatus 4.3.1 Spectrophotometer. 4.3.2 Acidity meter. 4.4 Sample Process the sample into chips with a thickness of not more than 1mm. 4.5 Analysis steps 4.5.1 Sample Weigh the sample (4.4) of the corresponding mass m0 according to Table 1, accurate to 0.0001g. 4.5.2 Parallel test Do two tests in parallel and take the average value. 4.5.3 Blank test Do a blank test with the sample (4.5.1). 4.5.4 Determination 4.5.4.1 Place the weighed sample (4.5.1) in a 250mL polytetrafluoroethylene (or silver) beaker, add 10mL sodium hydroxide (4.2.3), cover Place the watch glass and slowly heat (do not boil) until the sample is completely dissolved. Add 2mL hydrogen peroxide (4.2.1), heat to evaporate to a paste, and cool. Rinse the watch glass and the wall of the beaker with about 30 mL of warm water. Heat slowly (do not boil) until the salt is dissolved. Dilute with warm water to 70mL~ 80mL, heat at low temperature for 15min~20min (do not boil), and cool. 4.5.4.2 Using a polyethylene rod while stirring, transfer the sample solution (4.5.4.1) into 400 mL of mixed acid and 50 mL of warm water in advance according to Table 1. In the PTFE beaker, wash the watch and the wall of the beaker with warm water (if manganese hydroxide precipitates and adheres to the wall (or watch) of the cup, add a small amount Dissolve it with hydrochloric acid (4.2.4) and a few drops of sodium sulfite solution (4.2.11), wash it into a beaker with warm water]. Dilute the sample solution to approximately 180mL, heated to near boiling, continue to add a few drops of sodium sulfite solution (4.2.11) to completely dissolve the manganese hydroxide. Boil slowly for 10s~15s, cool down. Transfer to 250mL volumetric flask V0, dilute to the mark with water, and mix. Note. When the titanium or silver content is high, the sample solution is turbid, filter it in a 250mL volumetric flask with slow quantitative filter paper, and wash the filter paper with hot water. 4.5.4.3 When the silicon mass fraction is 0.0010%~0.020%, the pipetting volume (V1) is 50.00mL sample solution (4.5.4.2). In a 100mL volumetric flask; when the silicon mass fraction is >0.020%~15.00%, pipette the corresponding volume (V1) of the sample solution according to Table 1. (4.5.4.2) In a 100mL volumetric flask, dilute with water to about 50mL, add 1 drop of p-nitrophenol solution (4.2.15), and mix with ammonia (4.2.6) The solution was adjusted to bright yellow, then adjusted to colorless with nitric acid (4.2.5), and an excess of 2mL. 4.5.4.4 In a 100mL volumetric flask, add 5mL of ammonium molybdate solution (4.2.10), shake well, and place at 20℃~30℃ for 15min. plus Add 5mL tartaric acid solution (4.2.8), 10mL sulfuric acid (4.2.7), 5mL reduction solution (4.2.9), and shake well. Dilute to the mark with water, mix uniform. Leave it for 10 minutes. 4.5.4.5 Transfer the sample solution (4.5.4.4) and the blank test solution (4.5.3) into the absorption cell respectively, and use water as the reference to perform the wave in the spectrophotometer. Measure the absorbance at 650.0nm~810.0nm (measured within 30min), and subtract the absorbance of the sample solution (4.5.4.4) For the absorbance of the blank test solution (4.5.3), the corresponding silicon mass m1 is found from the working curve. 4.5.5 Drawing of working curve 4.5.5.1 Preparation of substrate solution In a 400mL plastic beaker, add 40mL sodium hydroxide (4.2.3), add.200mL water, use 110mL nitric acid (4.2.2) and 40mL hydrochloric acid (4.2.4) acidified and cooled. Transfer to a 500mL polyethylene volumetric flask, dilute to the mark with water, and mix. 4.5.5.2 Preparation of standard solution According to the silicon mass fraction, the preparation of the working curve series standard solution is divided into 2 types. a) When the silicon mass fraction is 0.0010%~0.020%. pipette 0mL, 0.50mL, 2.50mL, 5.00mL, 7.50mL, 10.00mL silicon standard solution B (4.2.14) in a set of 100mL volumetric flasks, respectively add 25mL base solution (4.5.5.1), dilute with water to about 50mL, and proceed according to 4.5.4.4 below; b) When the silicon mass fraction is >0.020%~15.00%. pipette 0mL, 0.50mL, 2.50mL, 5.00mL, 7.50mL, 10.00mL silicon standard solution A (4.2.13) in a set of 100mL volumetric flasks, dilute with water to about 50mL, add a drop of paranitrile Base phenol solution (4.2.15), use ammonia (4.2.6) to adjust the solution to bright yellow, and then use nitric acid (4.2.5) to adjust to colorless and excessive 2mL. Then proceed according to 4.5.4.4. 4.5.5.3 Measurement Move part of the series of standard solutions (4.5.5.2) into the absorption cell, take the reagent blank solution (without the silicon standard solution) as the reference, and At the wavelength of the photometer at 650.0nm~810.0nm, measure the absorbance (measured within 30min), and take the silicon mass as the abscissa to absorb The luminosity is the ordinate, and the working curve is drawn. 4.6 Test data processing The silicon content is calculated as the silicon mass fraction wSi, calculated according to formula (1). When the silicon mass fraction is less than 1.00%, the calculation result retains two significant digits; when the silicon mass fraction is ≥1.00%, the calculation result is expressed as small Count the last two digits. The rounding of values shall be implemented in 3.2 and 3.3 of GB/T 8170-2008. 4.7 Precision 4.7.1 Repeatability The measured values of two independent test results obtained under repeatability conditions, within the average range given below, these two test results The absolute difference does not exceed the repeatability limit r, and the case of exceeding the repeatability limit r does not exceed 5%. The repeatability limit r is within the linear range according to the data in Table 2. Obtained by interpolation or extension method. 4.7.2 Reproducibility The measured values of two independent test results obtained under reproducibility conditions, within the average range given below, the two test results The absolute difference is not greater than the reproducibility limit R, and the case of exceeding the reproducibility limit R does not exceed 5%. Reproducibility limit R According to the data in Table 3, the linear internal Obtained by interpolation or extension method.

5 Weight method

5.1 Method summary The sample is dissolved with sodium hydroxide, acidified with perchloric acid and dehydrated. Filter, dry, burn and weigh the silica. Volatilize with hydrofluoric acid Silicon, dry, burn, weigh the residue. Determine the silicon content based on the difference between the two. 5.2 Reagents Unless otherwise specified, only reagents and laboratory grade 3 water confirmed to be analytically pure and above are used in the analysis. 5.2.1 Perchloric acid (ρ=1.67g/mL). 5.2.2 Nitric acid (ρ=1.42g/mL). 5.2.3 Hydrofluoric acid (ρ=1.19g/mL). 5.2.4 Hydrochloric acid (5 95). 5.2.5 Sulfuric acid (1 1). 5.2.6 Hydrogen peroxide (1 1). 5.2.7 Perchloric acid (1 2). 5.2.8 Sodium hydroxide solution (320g/L). Weigh 320g of sodium hydroxide and dissolve it in water, after cooling, transfer to 1000mL polyethylene capacity In the bottle, dilute to the mark with water and shake well. 5.3 Apparatus High temperature furnace. 5.4 Sample Process the sample into chips with a thickness of not more than 1mm. 5.5 Analysis steps 5.5.1 Sample Weigh the sample (5.4) according to Table 4, accurate to 0.0001g, which is the mass (m2) of the sample. 5.5.2 Parallel test Do two tests in parallel and take the average value. 5.5.3 Blank test Do a blank test with the sample. 5.5.4 Determination 5.5.4.1 Place the sample (5.5.1) in a 250mL polytetrafluoroethylene (or silver) beaker, add 30mL sodium hydroxide solution (5.2.8) and cover it Watch the glass, slowly heat, when the sample is completely dissolved, add 2mL~4mL hydrogen peroxide (5.2.6) dropwise, wash the watch glass and the cup wall with as little water as possible, Evaporate to a paste (to prevent splashing) and cool. 5.5.4.2 Add 100mL hot water and rinse the wall of the cup, boil until the salt is dissolved, and cool. Transfer the sample solution into 5mL nitric acid (5.2. 2) In a 500mL beaker with 60mL perchloric acid (5.2.1) and 30mL water, wash the beaker and the tableware with hot water, and use a total of about 10mL high Chloric acid (5.2.7) washes the particles adhering to the wall of the cup and the watch in stages, then washes them with hot water and merges them into the main liquid. Place the beaker on the hot plate Heat and evaporate until a large amount of perchloric acid smoke comes out, and when the solution starts to precipitate out of salt (about 15min to 20min when perchloric acid smokes), remove the but. Add water to the beaker to about.200mL, continue heating to completely dissolve the salts, stir carefully with a glass rod, if manganese dioxide is precipitated, Add a few drops of hydrogen peroxide (5.2.6) to dissolve. 5.5.4.3 Filter the sample solution (5.5.4.2) with medium-speed quantitative filter paper in a 400mL beaker while stirring, and wash with hot hydrochloric acid (5.2.4) The beaker and filter paper are washed 5 to 6 t......
Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20975.5-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20975.5-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20975.5-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20975.5-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20975.5-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20975.5-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.