GB/T 20568-2022 English PDF

US$269.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20568-2022: Metallic materials - Tube ring hydraulic pressure test
Status: Valid

GB/T 20568: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20568-2022	269	Add to Cart	3 days	Metallic materials - Tube ring hydraulic pressure test	Valid
GB/T 20568-2006	399	Add to Cart	3 days	Metallic materials -- Tube ring hydraulic pressure test	Obsolete

Similar standards

GB/T 24524   GB/T 24183   GB/T 25048   GB/T 17473.7   

Basic data

Standard ID: GB/T 20568-2022 (GB/T20568-2022)
Description (Translated English): Metallic materials - Tube ring hydraulic pressure test
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: H23
Classification of International Standard: 77.040.10
Word Count Estimation: 14,141
Date of Issue: 2022-10-14
Date of Implementation: 2022-10-12
Older Standard (superseded by this standard): GB/T 20568-2006
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 20568-2022: Metallic materials - Tube ring hydraulic pressure test

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Metallic materials -- Tube ring hydraulic pressure test ICS 77.040.10 CCSH23 National Standards of People's Republic of China Replacing GB/T 20568-2006 Metallic material pipe ring hydraulic test method (ISO 15363.2017, MOD) Published on 2022-10-12 2022-10-12 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Symbols and Explanations 1 5 Principle 1 6 Test device 2 7 Ring Specimen 3 8 Test procedure 4 9 Hoop strength evaluation 4 10 Round-off of the numerical value of the test result 5 11 Test report 5 Appendix A (Informative) Comparison of Steel Pipe Symbols and Instructions 6 Appendix B (Informative) Proof Test and Reduced Section Test 7 Appendix C (Informative) Chain Extensometer 8

foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document replaces GB/T 20568-2006 "Hydraulic Test Method for Pipe Rings of Metallic Materials", compared with GB/T 20568-2006, except In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Changed the symbols of the measured value of the thickness of the pipe ring and the measured value of the outer diameter of the pipe ring (see Table 1, Table 1 of the.2006 edition); --- Change "sample" to "ring sample" (see Chapter 7, Chapter 5 of the.2006 edition); --- Changed the allowable error requirements for internal pressure measurement (see 8.4, 6.4 of the.2006 edition); --- Changed the hoop strength evaluation of the pipe body with d/a < 20, from the note to the clause (see 9.3, 7.3 of the.2006 edition); --- Added the rounding of test result data (see Chapter 10); --- Increased the comparison of steel pipe symbols and descriptions (see Appendix A). This document is modified and adopted ISO 15363.2017 "Hydraulic test method for pipe rings of metallic materials". Compared with ISO 15363.2017, this document has the following structural adjustments. --- Added the chapter "Rounding of test result values"; --- Adjusted the numbers of Appendix A and Appendix B. The technical differences between this document and ISO 15363.2017 and their reasons are as follows. --- Increased the test requirements for weld samples (see 8.2) to increase the applicability of the standard and meet the inspection requirements of different products; --- Increased the numerical rounding requirements of the test results to improve the operability of the test (see Chapter 10). The following editorial changes have been made to this document. --- Added Appendix C (informative) chain extensometer. Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Iron and Steel Association. This document is under the jurisdiction of the National Steel Standardization Technical Committee (SAC/TC183). This document is drafted by. Tianjin Steel Pipe Manufacturing Co., Ltd., Pabo Testing Technology Service Co., Ltd., Jiangsu Wujin Stainless Co., Ltd. Division, Beijing Space Electromechanical Research Institute, Metallurgical Industry Information Standards Research Institute. The main drafters of this document. Zhen Xiaochuan, Huang Jin, Liang Caimeng, Xu Qi, Dong Li, Zang Bo, Pan Yuanyuan, Xu Liang, Gao Jiangjun, Hou Huining, Han Yongming, Zhang Rongsheng and Su Longying. This document was first published in.2006 and this is the first revision. Metallic material pipe ring hydraulic test method

1 Scope

This document specifies the hydraulic test method for metal pipe rings. This document is applicable to pipes whose outer diameter is greater than 120mm and the ratio of outer diameter and wall thickness is not less than 20.1. The purpose of the test is to determine the hoop stress value that achieves the required specified hoop total strain.

2 Normative references

There are no normative references in this document.

3 Terms and Definitions

There are no terms and definitions that need to be defined in this document.

4 Symbols and descriptions

The symbols and corresponding descriptions used in this document are shown in Table 1. Table 1 Symbols and Descriptions Symbol Description Unit a Pipe ring thickness measurement in mm At specified total hoop strain % d Measured value of outer diameter of pipe ring mm l Pipe ring length mm p Static pressure MPa to reach the specified total hoop strain RAt specifies the hoop strength MPa corresponding to the total hoop strain Note. For symbols used in relevant steel pipe product standards, see Appendix A.

5 Principles

The annular specimen between the two pressure plates expands unconstrainedly under the internal liquid pressure; the outer perimeter of the tube is the effective gauge length of the specimen. The test is carried out by using annular specimens taken from welded or seamless pipes, the thickness of which is determined according to the capabilities of the testing equipment and the strength of the pipe body (see picture 1). All sharp edges were removed from the machined surfaces of the specimens prior to testing. The hydraulic excess required to achieve the specified hoop strain When the capability of the test instrument is exceeded, the improved test can be carried out with reference to the method described in Appendix B. This test method is specified when measurement of hoop strength is required, which is not subject to cold work deformation that occurs when standard tensile specimens are flattened and residual stress. Standard tensile tests are essential when the determination of tensile strength and elongation is required. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20568-2022_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20568-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20568-2022_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20568-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20568-2022?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20568-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.