GB/T 20418-2011 English PDF

US$1319.00 · In stock
Delivery: <= 8 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20418-2011: Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices
Status: Valid

GB/T 20418: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20418-2011	1319	Add to Cart	8 days	Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices	Valid
GB/T 20418-2006	RFQ	ASK	11 days	Earthmoving machinery lighting, signaling and marking lights and reflectors	Obsolete

Similar standards

GB/T 18148   GB/T 17922   GB/T 17921   GB/T 25606   GB 45943   GB/T 45375   

Basic data

Standard ID: GB/T 20418-2011 (GB/T20418-2011)
Description (Translated English): Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: P97
Classification of International Standard: 53.100
Word Count Estimation: 60,682
Date of Issue: 2011-09-29
Date of Implementation: 2012-01-01
Older Standard (superseded by this standard): GB/T 20418-2006
Quoted Standard: GB/T 8498; ISO 303-2002; ISO 7227-1987
Adopted Standard: ISO 12509-2004, MOD
Regulation (derived from): National Standards Bulletin 2011 No. 14
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the use of earth-moving machinery lighting, signaling and marking lights, and reflectors minimum requirements for installation and performance. This standard applies to GB/T 8498 defined self -highway and highway -type tire or self- moving machinery crawler, this standard does not apply to walk -operated machines.

GB/T 20418-2011: Earth-moving machinery -- Lighting, signalling and marking lights, and reflex-reflector devices

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Earth-moving machinery. Lighting, signalling and marking lights, and reflex-reflector devices ICS 53.100 P97 National Standards of People's Republic of China Replacing GB/T 20418-2006 Earthmoving machinery Lighting, signal and marker lights and reflectors Lighting, signaling, andmarkinglights, andreflex-reflectordevices (ISO 12509.2004, MOD) Issued on. 2011-09-29 2012-01-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ Introduction Ⅱ 1 Scope 1 2 Normative references 1 3 Terms, definitions and symbols 1 Installation 4 earthmoving machinery lighting, signal and marker lights and reflectors 4 Appendix A (normative) Lighting Group 6 Appendix B (normative) red front rear visibility and visibility white 7 Annex C (normative) optical signal device 8 Annex D (normative) lighting and signal lights colorimetric characteristics 9 Appendix E (normative) lighting, signal and marker lights and reflectors Data Sheet 11 Annex F (informative) lighting, signal and symbol illumination and position of the reflector 49 Annex G (informative) on behalf of earthmoving machinery machinery category icon 51 Appendix H (informative) lighting, signal and symbol illumination, special warning lights, turn signals, lights and reflectors work and low ECE regulations vehicle signs 53 References 55

Foreword

This standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 20418-2006 "moving machinery lighting, signal and marker lights and reflectors." This standard GB/T 20418-2006 compared, in addition to editorial changes outside the main technical changes are as follows. --- Increased introduction; --- Removed some normative references; --- Modify some of the terms and definitions (see 3.1.6,3.1.8,3.1.9 and 3.1 10. The 2006 edition of 3.6,3.8,3.9 And 3.10); --- Added "symbol" (see 3.2); --- Modify some of the basic requirements (see 4.6.1 and 462, 2006 edition of 4.1.6.1 and 4.1.6.2..); --- Altered the content of Appendix E. This standard uses redrafted Law Amendment uses ISO 12509.2004 "moving machinery lighting, signal and marker lights and reflectors." Technical differences exist compared to 2004, the main technical differences and their reasons are as follows. This standard and ISO 12509. --- For ease of use, in Appendix E of the table and increase the number of tables referenced table; --- 3.2 in the definition of K added "(or the rear of the machine)" to make the definition more accurate; --- E.5.1.6, the type of rear turn signal lamps 1a to type 2a, error correction ISO ; --- Figure E.4, Figure E.11, Figure E.12, Figure E.16, E.19 in FIG, β1, β2 label position reversed, error correction ISO ; --- Figure E.5a), modify the size of the B-line label position, error correction ISO ; --- Figure E.5 description b bar, "1/3L" to "1/3L1", error correction ISO ; --- E.5.3.2 the turn signal lamp type 2 to type 1 error correction ISO ; --- E.5.4.1, the front side turn signal lamp of the type 3b to type 3, error correction ISO ; --- Table E.10 in, "K" to "K1", "see E.5.4" to "see E.5.1.7.2 layout C", error correction ISO ; --- E.7.1.3c), and "should not be mixed with the rear position lamp" to "may be combined with the rear position lamp", in line with China's national conditions, it may be ISO error; --- Figure E.14, supplement labels H1, H2, D, E size view size chart to make a more complete; --- E.15.1.3, "front reflector" to "side reflectors" error correction ISO ; --- Table E.20, the "minimum number per side basis E.15.1.2" to "the minimum number of each side according to Figure E.20"; --- Table E.20, the values \u200b\u200bH1 pre-increase "≤", which is the upper limit should be specified. The standard proposed by China Machinery Industry Federation. This standard by the national earthmoving machinery Standardization Technical Committee (SAC/TC334) centralized. This standard is drafted by. Tianjin Institute of Mechanical Engineering, Guangxi Liugong Machinery Co., Ltd., Xiamen, Xiamen Engineering Machinery Co. Shares The company, Shaanxi Tongli Heavy Industries Co., Ltd., Hill redevelopment Machine Co., Ltd. Participated in the drafting of this standard. Lingong Construction Machinery Co., Ltd. The main drafters of this standard. Duan Lin, Shanghai Bo, Wu Yun Cai, Cai Dengsheng, Li Wei Ping, Fancui Ling, Pang Jianguang, Xiong Yu force. This standard was first released in July 2006, this is the first revision.

Introduction

Earth-moving machinery designed to accommodate a wide range of jobs and workplaces, their size, quality, speed, and the working device becomes an integral part of Also a wide range of. Thus, the combination of lighting, signal and marker lights and reflectors are different. Depending on the application of this standard and speed of the machine, providing lighting, signal and marker lights and reflectors selection information. Earthmoving machinery Lighting, signal and marker lights and reflectors

1 Scope

This standard specifies the minimum requirements for lighting, signal and symbol illumination and reflector installation and performance for use on earthmoving machinery. This standard applies to GB/T 8498 defined off-highway tire and road type self or self crawler earth-moving machinery, this standard does not apply For walk-operated machines.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. GB/T 8498 Earth - moving machinery - Basic types - Identification and terms and definitions (GB/T 8498-2008, ISO 6165.2006, IDT) ISO 303.2002 Road vehicles - motor vehicles and trailers with lighting and light signaling devices installation (Roadvehicles- Instalationoflightingandlightsignalingdevicesformotorvehiclesandtheirtrailers) ISO 7227. 1987 Road vehicles - Lighting and light signaling devices terminology (Roadvehicles-Lightingandlightsignal- lingdevices-Vocabulary) 3 Terms, definitions and symbols 3.1 Terms and Definitions ISO 303, ISO 7227 define the following terms and definitions apply to this document. 3.1.1 Zero Y plane zeroYplane Vertical plane through the longitudinal center line of the machine. Note. See GB/T 18577.1. 3.1.2 X plane Xplane Any of a vertical plane perpendicular to the Y plane. Note. See GB/T 18577.1. 3.1.3 Reference ground plane groundreferenceplane GRP Place a solid level machine. 3.1.4 Outermost extremeouteredge Parallel to the mid longitudinal plane of the machine, and the machine with lateral projections on either side of a plane in contact with the outer phase, without considering. ground contact Projections near the tire and piezometers connected to the tire, mounted on the outwardly projecting anti-slip device, mirrors, wheel lateral directions Lights, front and rear position lights and brake lights. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20418-2011_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20418-2011_English as soon as possible, and keep you informed of the progress. The lead time is typically 5 ~ 8 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20418-2011_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20418-2011_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20418-2011?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20418-2011 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.