GB/T 20323-2020 English PDF

US$339.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20323-2020: Milling cutters designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
Status: Valid

GB/T 20323: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20323-2020	339	Add to Cart	4 days	Milling cutters designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges	Valid
GB/T 20323.1-2006	394	Add to Cart	3 days	Milling cutters -- Designation -- Part 1: Shank type end mills of solid or tipped design	Obsolete

Similar standards

GB/T 33524.2   GB/T 5104   GB/T 972   GB/T 20333   GB/T 20328   

Basic data

Standard ID: GB/T 20323-2020 (GB/T20323-2020)
Description (Translated English): Milling cutters designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J41
Classification of International Standard: 25.100.20
Word Count Estimation: 18,138
Date of Issue: 2020-11-19
Date of Implementation: 2021-03-01
Older Standard (superseded by this standard): GB/T 20323.1-2006, GB/T 20323.2-2006
Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration

GB/T 20323-2020: Milling cutters designation - Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Milling cutters designation-Shank-type and bore-type milling cutters of solid or tipped design or with indexable cutting edges ICS 25.100.20 J41 National Standards of People's Republic of China Replace GB/T 20323.1-2006, GB/T 20323.2-2006 Milling cutter code integral or insert tooth structure or Shank and hole milling cutters with indexable cutting edges (ISO 11529.2013,Milingcutters-Designation-Shank-typeandbore-type 2020-11-19 released 2021-03-01 implementation State Administration for Market Regulation Issued by the National Standardization Management Committee

Foreword

This standard was drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T 20323.1-2006 "Milling Cutter Code Part 1.Shank End Mills with Integral or Inserted Tooth Structure", GB/T 20323.2-2006 "Milling Cutter Code Part 2.Shank and Hole Milling Cutters with Indexable Inserts". Compared with GB/T 20323.1-2006 and GB/T 20323.2-2006, the main changes of this standard are as follows. ---Added normative references; ---Modified the brief description of the code; ---According to the brief description of the new code, the symbol rules have been modified; ---Modified manufacturer information; ---Modified the additional information of cutting some materials; ---Informative Appendix A has been added. This standard uses the redrafting method to modify and adopt ISO 11529.2013 ``Milling cutter code integral or insert structure or with indexable cutting Shank and hole milling cutters. The technical differences between this standard and ISO 11529.2013 and the reasons are as follows. --- Regarding normative reference documents, this standard has made adjustments with technical differences to adapt to my country's technical conditions and adjustments. The situation is collectively reflected in Chapter 2 "Normative Reference Documents", and the specific adjustments are as follows. ● Added reference to ISO /T S13399-60 (see 4.9 and Table 7). ---In Table 7, the corresponding common types of HSK handles in China have been added. The reason is that it was not popular before.2013 and the current production volume is increasing. increase. ---In the symbol (number 11) for identifying the size of the shank, a polygonal shank with a flange contact surface and a steel ball tensioner are added The example of the tapered shank of the module of the system, the reason is that there is its type in Table 7, so the example is improved. This standard has made the following editorial changes. ---Modify the standard name to "milling cutter code integral or toothed structure or shank and hole milling cutter with indexable cutting edge". This standard was proposed by China Machinery Industry Federation. This standard is under the jurisdiction of the National Tool Standardization Technical Committee (SAC/TC91). Drafting organizations of this standard. Sentai Inge (Chengdu) CNC Tool Co., Ltd., Chengdu Tool Research Institute Co., Ltd., Taizhou University Zhejiang Jiang Province Key Laboratory of Measuring and Cutting Tool Testing and Deep Processing Technology Research, Zhuzhou Oukeyi CNC Precision Tool Co., Ltd. The main drafters of this standard. Zhao Qingjun, Zeng Yuhuan, Wu Jianbo, Liu Gang, Shen Shichang, Xia Keyao, Li Haixia. The previous versions of the standard replaced by this standard are as follows. ---GB/T 20323.1-2006, GB/T 20323.2-2006. Milling cutter code integral or insert tooth structure or Shank and hole milling cutters with indexable cutting edges

1 Scope

This standard specifies the code names of shank and hole milling cutters with integral or inserted tooth structure or with indexable cutting edges to simplify users and supply The supplier’s communication with this type of tool. This standard applies to shank and hole milling cutters with integral or inserted tooth structure or with indexable cutting edges.

2 Normative references

The following documents are indispensable for the application of this document. For dated reference documents, only the dated version applies to this article Pieces. For undated references, the latest version (including all amendments) applies to this document. ISO 3002-1 Basic Parameters of Cutting and Grinding Processing Part 1.General Terms and Basics of Geometric Parameters of the Working Part of the Tool Quasi-coordinate system, tool angle and working angle, chip breaker (Basicquantitiesincuttingandgrinding-Part 1.Geometryof theactivepartofcuttingtools-Generalterms,referencesystems,toolandworkingangles,chip breakers) ISO 3002-3 Basic parameters of cutting and grinding. Part 3.Geometric parameters and motion parameters in cutting (Basicquan- titiesincuttingandgrinding-Part 3.Geometricandkinematicquantitiesincutting) ISO /T S13399-60 Cutting tool data expression and exchange Part 60.Connection system reference dictionary (Cuttingtooldata representationandexchange-Part 60.Referencedictionaryforconnectionsystems)

3 Brief description of code

The code of shank and hole milling cutters is composed of codes containing several symbols. These codes are used to identify important features of milling cutters. Additional information about the manufacturer or supplier is specified in Chapter 5. The symbols of this standard are defined as follows. Definition of number symbol 1 Number symbol ϕ to identify diameter (see 4.1) 2 Letter symbols to identify the type of milling cutter (see 4.2) 3 Number signs for identifying the number of effective cutting edges (see 4.3) 4 Letter symbols to identify the cutting direction (see 4.4) 5 Identify the digital sign of the entering angle κr (see 4.5) 6 Letter symbols to identify milling cutter structure (see 4.6) 7 Identify the number sign of the maximum cutting depth or width ap (see 4.7) 8 Letter symbols to identify the helix angle or blade shape (see 4.8) 9 Letter symbols to identify the type of handle (see 4.9) 10 Number symbols to identify the handle type (see 4.10) 11 Number symbols to identify the size of the handle (see 4.10) ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20323-2020_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20323-2020_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20323-2020_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20323-2020_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 20323-2020?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20323-2020 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.