GB/T 20316.1-2009 English PDF

US$229.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 20316.1-2009: Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 20316.1-2009	229	Add to Cart	3 days	Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits	Valid

Similar standards

GB/T 2493   GB/T 2480   GB/T 23541   GB/T 17588   GB/T 44687   GB/T 16457.1   

Basic data

Standard ID: GB/T 20316.1-2009 (GB/T20316.1-2009)
Description (Translated English): Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: J43
Classification of International Standard: 25.100.70
Word Count Estimation: 10,188
Date of Issue: 2009-04-23
Date of Implementation: 2009-12-01
Quoted Standard: GB/T 2481.1; GB/T 9258.1; GB/T 20316.2
Adopted Standard: ISO 9136-1-2004, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.5 (Total No.145)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the method for measuring abrasive and rough coated abrasives abrasive bulk density. This section applies to ordinary abrasive grit F12 ~ F220 and P12 ~ P220 's.

GB/T 20316.1-2009: Abrasive grains -- Determination of bulk density -- Part 1: Macrogrits

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Abrasive grains Determination of bulk density Part 1. Macrogrits ICS 25.100.70 J43 National Standards of People's Republic of China Determination of ordinary abrasive bulk density Part 1. kibble (ISO 9136-1.2004, MOD) Posted 2009-04-23 2009-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 20316 "ordinary abrasive bulk density determination" is divided into two parts. --- Part 1. coarse grains; --- Part 2. powder. This section GB/T Part of 120,316. The partial modification using ISO 9136-1.2004 "Determination of ordinary abrasive bulk density - Part 1. coarse grain" (in English). This section according to ISO 9136-1.2004 redrafted. Because of the special needs and requirements of the development of industry, this section at the time of adoption of international standards has been modified. These technical differences with Vertical single-line identification in which they are involved in terms of margin. This portion of the ISO 9136-1.2004 main technical differences are as follows. --- Clear measuring cylinder volume calibration time; --- Provisions of the instrument should be measured horizontal position adjustment before measurement; --- Provisions of the arithmetic mean of three measurements as a measurement result; --- Gives the F100 or P100 to fine abrasive and drying temperature tolerances. For ease of use, this section also made the following editorial changes. --- Delete foreword international standards; "." --- With the decimal point as the decimal place of international standards "and"; --- The "ISO 9136 of this part" to "this part." Appendix A of this section is an informative annex. This part is proposed by China Machinery Industry Federation. This part of the National Standardization Technical Committee Abrasives (SAC/TC139) centralized. This section is drafted. Zhengzhou Institute of Abrasives grinding. The main drafters of this section. Wangwei Tao, Li Yanling, Di Manli, Zhang Yi. Determination of ordinary abrasive bulk density Part 1. kibble

1 Scope

This section GB/T 20316 specifies the method for determination of bonded abrasives and coated abrasives bulk density of coarse grains. This section applies to ordinary abrasive grit F12 ~ F220 and P12 ~ P220's.

2 Normative references

The following documents contain provisions which, through reference GB/T 20316 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 2481.1 Bonded abrasives grain size composition testing and labeling - Part 1. kibble F4 ~ F220 (GB/T 2481.1-1998, eqvISO 8486-1.1996) GB/T 9258.1 coated abrasives Analysis Part 1 abrasive particle size. Grain size (GB/T 9258.1-2000, ISO 6344-1.1998, IDT) GB /20316.2 ordinary abrasive bulk density determination T - Part 2. Powder (GB/T 20316.2-2006, ISO 9136- 2.1999, IDT)

3 Terms and Definitions

GB/T 2481.1, terms and definitions GB/T 9258.1 and GB/T 20316.2 established in this section apply to GB/T 20316 of.

4 Test Instruments

4.1 General provisions Referring to Figure 1 the test apparatus (see Appendix schematic A), which contains 4.2 to 4.6 parts. 4.2 Bracket Can funnel fixed in the vertical position, and the bottom of the funnel spout to the distance measuring cylinder (138 ± 1) mm. 4.3 Funnel Funnel slope should be sufficiently smooth to ensure that the abrasive particles are not stuck on an incline. Funnel from the smooth inner surface of stainless steel, too. Its size Parameters are as follows (see also Figure 1). --- Funnel Total height. 240mm; --- Upper opening diameter. 160mm; --- Cylindrical spout inner diameter.  (20 ± 0.5) mm; --- Cylindrical spout height. (40 ± 1) mm. 4.4 hopper discharge valve To ensure that the funnel outlet openable and closable. You can use swing drain valve shown in Figure 1. 4.5 measuring cylinder Measuring cylinder is a smooth inner surface, Vp is the volume (200 ± 0.5) cm3 cylinder; an inner diameter of 64mm, the height 62.2mm. Measuring cylinder being placed on the lower end of the falling material. Drop height should be measured abrasive grains (138 ± 1) mm (bottom funnel spout ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 20316.1-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 20316.1-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 20316.1-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 20316.1-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.