GB/T 20108-2017 English PDFUS$359.00 · In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20108-2017: Low temperature unitary air conditioner Status: Valid GB/T 20108: Historical versions
Basic dataStandard ID: GB/T 20108-2017 (GB/T20108-2017)Description (Translated English): Low temperature unitary air conditioner Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: J73 Classification of International Standard: 27.200 Word Count Estimation: 18,188 Date of Issue: 2017-07-12 Date of Implementation: 2018-02-01 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China GB/T 20108-2017: Low temperature unitary air conditioner---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Low temperature unitary air conditioner ICS 27.200 J73 National Standards of People's Republic of China Replacing GB/T .20108-2006 Low temperature unit type air conditioner 2017-07-12 released 2018-02-01 Implementation General Administration of Quality Supervision, Inspection and Quarantine of the People 's Republic of China China National Standardization Management Committee released Directory Preface I 1 Scope 1 2 normative reference document 1 3 Terms and definitions 1 4 type, model and basic parameters 2 5 requirements 3 6 Test Method 6 7 Inspection rules 9 Marking, packaging, transportation and storage Appendix A (informative) Low temperature unit type air conditioner model representation method 12 Appendix B (informative) Partial urban temperature distribution coefficient 13 ForewordThis standard is drafted in accordance with the rules given in GB/T 1.1-2009. This standard replaces GB/T .20108-2006 "low temperature unit type air conditioner". Compared with GB/T .20108-2006, the main changes are as follows. --- increase the cooling capacity, cooling power consumption, the annual energy efficiency ratio (AEER), air volume, standard air volume, cold air ratio definition (see 3.2, 3.3, 3.5, 3.6, 3.7, 3.8); - the definition of terminology for the removal of cryogenic conditions; - modified type classification (see 4.1, 4.2); --- modified the basic parameters (see 4.3.1, 4.3.2); - Increased air volume, condensate and condensate removal, yearly energy efficiency (AEER) test conditions and test requirements (see 4.3.3, 5.3.7, 5.3.8, 5.3.13, 6.3.11); - increased water pressure drop, annual energy efficiency ratio, cold wind ratio requirements and limits (see 5.3.12, 5.3.13, 5.3.14); - modified general requirements and safety requirements (see 5.1, 5.2); --- increase the instrument type and accuracy, test conditions parameters of the reading tolerance (see 6.1.4,6.1.5,6.1.6,6.1.7); - modified test requirements (see 6.2); - the removal of energy efficiency and minimum load conditions and their corresponding test requirements; - modified factory inspection and sampling inspection requirements (see 7.1, 7.2); - modified mark, packaging, transport and storage requirements (see 8.1, 8.2, 8.3); --- modified the low temperature unit type air conditioner model number in Appendix A (see Appendix A); - increase the urban temperature distribution coefficient (see Appendix B). This standard is proposed by the China Machinery Industry Federation. This standard is national standardization of refrigeration and air conditioning equipment Technical Committee (SAC/TC238). The main drafting unit of this standard. Guangdong Shenling Environmental System Co., Ltd., Hefei General Machinery Research Institute, Ma On Shan Bo Bo thermal Technology Co., Ltd. This standard participates in the drafting unit. Zhejiang Huijie Refrigeration Equipment Co., Ltd., Hefei General Electrical and Mechanical Products Testing Institute Co., Ltd. The main drafters of this standard. Pan Zhanhua, Xie Baogang, Wang Jiping, Zhang Xuewei, Jiang Mengjie, Zhang Xiaoyan, Zhang Yuchen. This standard replaced the previous version of the standard release. --- GB/T .20108-2006. Low temperature unit type air conditioner1 ScopeThis standard specifies the terms and definitions, types, types and basic parameters of low temperature unit air conditioners (hereinafter referred to as "low temperature air conditioners"), Requirements, test methods, inspection rules, marking, packaging, transportation and storage. This standard applies to the nominal cooling capacity greater than or equal to 7000W, for the process environment, the inlet temperature range of 5 ℃ ~ 18 ℃ low Temperature unit air conditioner.2 normative reference documentsThe following documents are indispensable for the application of this document. For dated references, only the dated edition applies to this article Pieces. For undated references, the latest edition (including all modifications) applies to this document. GB/T 191 packaging and storage icon GB/T 2828.1 Sampling inspection procedures Part 1. Batch inspection sampling plan for retrieval by quality limit (AQL) GB/T 6388 shipping package collection and delivery mark GB/T 13306 signs Elemental air conditioners GB/T 17758-2010 GB 25130 Unit type air conditioner safety requirements JB/T 7249 refrigeration equipment terminology3 terms and definitionsThe following terms and definitions are defined in JB/T 7249 and are applicable to this document. 3.1 For the air inlet temperature between 5 ℃ ~ 18 ℃ to the enclosed space to provide the treatment of air equipment. It mainly includes refrigeration systems as well Air circulation and air filtering devices, and may also include heating and humidifying means. 3.2 Cooling capacity Under the specified cooling capacity test, the sum of the heat removed from the enclosed space, room or area during the unit time of the low temperature air conditioner. Note. The unit of cooling capacity is watts (W). 3.3 Cooling power consumption In the specified cooling capacity test, low-temperature air-conditioning operation of the power consumed. Note. The unit of cooling power consumption is watts (W). 3.4 Cooling energy efficiency ratio (EER) energyefficiencyratio; In the specified cooling capacity test, the low temperature air conditioning machine cooling capacity and cooling power consumption ratio. Note. The value of the cooling energy efficiency ratio is expressed in W/W. ...... |
