Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 20056-2015 PDF English

US$90.00 · In stock · Download in 9 seconds
GB/T 20056-2015: Rolling bearings -- Radial needle roller and cage assemblies -- Boundary dimensions and tolerances
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 20056: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 20056-201590 Add to Cart Auto, 9 seconds. Rolling bearings -- Radial needle roller and cage assemblies -- Boundary dimensions and tolerances Valid
GB/T 20056-2006319 Add to Cart 3 days Rolling bearings -- Radial needle roller and cage assemblies -- Dimensions and tolerances Obsolete

Similar standards

GB/T 21559.1   GB/T 21559.2   GB/T 16643   GB/T 20058   

GB/T 20056-2015: Rolling bearings -- Radial needle roller and cage assemblies -- Boundary dimensions and tolerances


---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20056-2015
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.100.20 J 11 GB/T 20056-2015 / ISO 3030.2011 Replacing GB/T 20056-2006 Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions and tolerances (ISO 3030.2011, IDT) Issued on: DECEMBER 31, 2015 Implemented on: APRIL 1, 2016 Issued by. General Administration of Quality Supervision, Inspection and Quarantine; Standardization Administration Committee.

Table of Contents

Foreword ... 3 1 Scope ... 5 2 Normative references ... 5 3 Terms and definitions ... 5 4 Symbols... 5 5 Boundary dimensions ... 6 6 Tolerances ... 8 7 Functional gauging and gauge dimensions ... 9 Annex A (Informative) Tolerances for shaft raceway, housing raceway and raceway widths ... 10 Bibliography ... 13

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 20056-2006 “Rolling bearings - Radial needle roller and cage assemblies - Dimensions and tolerances”. Compared with GB/T 20056-2006, in addition to editorial modifications, the main technical changes are as follows. - modified the standard name; - added the symbol of a single width deviation of cage and modified its lower limit deviation value (see Clause 4 and Table 3 of this Edition, 5.2 of Edition 2006); - modified the annex “Tolerances for shaft raceway, housing raceway and raceway widths” (see Annex A of this Edition, Annex A of Edition 2006). This Standard uses translation method and identically adopts ISO 3030.2011 “Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions and tolerances”. The Chinese documents which have consistency with the international normative references in this Standard are as follows. - GB/T 307.2-2005 Rolling bearings - Measuring and gauging principles and methods (ISO 1132-2.2001, MOD) - GB/T 309-2000 Rolling bearings - Needle rollers (neq ISO 3096.1996) - GB/T 4199-2003 Rolling bearings - Tolerances - Definitions (ISO 1132- 1.2000, MOD) - GB/T 6930-2002 Rolling bearings--Vocabulary (ISO 5593.1997, IDT) - GB/T 7811-2015 Rolling bearings - Symbols for physical quantities (ISO 15241.2012, IDT) This Standard was proposed by China Machinery Industry Federation. This Standard shall be under the jurisdiction of National Technical Committee on Rolling Bearings of Standardization Administration of China (SAC/TC 98). The drafting organizations of this Standard. Luoyang Bearing Research Institute Co., Ltd., Suzhou Bearing Factory Co., Ltd., Changzhou Koyo Bearing Co., Ltd., Jining Jingyi Bearing Co., Ltd., Qidong Jinqiao Bearing Co., Ltd. Main drafters of this Standard. Song Yucong, Zhang Wenhua, Qian Aifang, Tang Weiqing, Fu Jilong, Liu Guoqiang. Version of standard substituted by this Standard is. - GB/T 20056-2006. Rolling bearings - Radial needle roller and cage assemblies - Boundary dimensions and tolerances

1 Scope

This Standard specifies the boundary dimensions for radial needle roller and cage assemblies. In addition, it gives the tolerances for the cage width and method of functional gauging of smallest single bore diameter of needle roller complement. Informative values for the tolerances of shaft raceway, housing raceway and raceway widths are given in Annex A.

2 Normative references

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO 1132-1, Rolling bearings - Tolerances - Part 1. Terms and definitions ISO 1132-2.2001, Rolling bearings - Tolerances - Part 2. Measuring and gauging principles and methods ISO 3096, Rolling bearings - Needle rollers - Dimensions and tolerances ISO 5593, Rolling bearings - Vocabulary ISO 15241, Rolling bearings - Symbols for quantities

3 Terms and definitions

For the purposes of this document, the terms and definitions given in ISO 1132- 1 and ISO 5593 apply.

4 Symbols

For the purposes of this document, the symbols given in ISO 15241 and the ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 20056-2015 be delivered?Answer: The full copy PDF of English version of GB/T 20056-2015 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 20056-2015_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20056-2015_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 20056-2015 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 20056-2015?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20056-2015 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 20056-2015?

A step-by-step guide to download PDF of GB/T 20056-2015_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 20056-2015".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9