GB/T 20051-2025 English PDFUS$439.00 ยท In stock
Delivery: <= 4 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 20051-2025: Specifications of amusement rides for flying trapeze Status: Valid GB/T 20051: Historical versions
Basic dataStandard ID: GB/T 20051-2025 (GB/T20051-2025)Description (Translated English): Specifications of amusement rides for flying trapeze Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: Y57 Classification of International Standard: 97.200.40 Word Count Estimation: 22,215 Date of Issue: 2025-08-29 Date of Implementation: 2026-03-01 Older Standard (superseded by this standard): GB/T 20051-2006 Issuing agency(ies): State Administration for Market Regulation, National Standardization Administration GB/T 20051-2025: Specifications of amusement rides for flying trapeze---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT20051-2025ICS 97.200.40 CCSY57 National Standard of the People's Republic of China Replaces GB/T 20051-2006 General technical requirements for aerialists Released on August 29, 2025 Implementation on March 1, 2026 State Administration for Market Regulation The National Standardization Administration issued Table of ContentsPreface III 1 Scope 1 2 Normative references 1 3 Terms and Definitions 1 4 Technical Requirements 2 4.1 Basic Requirements 2 4.2 Loads and calculations 3 4.3 Structure 3 4.4 Electrical and control systems 4 4.5 Carriage System 5 4.6 Safety protection devices and measures 5 4.7 Manufacturing 6 4.8 Installation and commissioning 6 4.9 Using Maintenance 7 5 Inspection and Testing 7 5.1 Instruments and Equipment 7 5.2 Operating test conditions 7 5.3 Detection and test methods 7 6 Random documents, marking, packaging, transportation and storage 12 6.1 Random Documents and Markings 12 6.2 Packaging, transportation and storage 12 Appendix A (Informative) Typical working conditions and load combination examples for aerial acrobats 13 A.1 Lifting Condition 13 A.2 Swinging Condition 13 A.3 Separation Conditions 13 A.4 Extreme wind conditions 13 A.5 Earthquake Conditions 13 A.6 Ice encapsulation condition 14 A.7 Other working conditions 14 Reference 15 Preface This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for standardization work Part 1.Structure and drafting rules for standardization documents" Drafting. This document replaces GB/T 20051-2006 "Technical conditions for non-powered amusement rides". In addition to structural adjustments and editorial changes, the main technical changes are as follows. --- Added terms and definitions (see Chapter 3); --- Deleted the content related to bungee jumping, zip line, children's entertainment city, inflatable bounce, and tethered sightseeing balloon (see 4th Chapter 1, Chapter 5, Chapter 6, Chapter 7, Chapter 8); --- Added technical requirements, inspection and testing requirements for aerial acrobats (see Chapter 4 and Chapter 5). Please note that some of the contents of this document may involve patents. The issuing organization of this document does not assume the responsibility for identifying patents. This document is proposed and coordinated by the National Technical Committee for Standardization of Ropeways and Amusement Facilities (SAC/TC250). This document was drafted by. China Special Equipment Testing and Research Institute, Hebei Huatong Sili Amusement Equipment Co., Ltd., Shenyang Creative Amusement Management Co., Ltd., Beijing MCC Equipment Research and Design Institute Co., Ltd., China Amusement Park Association, Wuhan Special Equipment Supervision and Inspection Institute, Zibo Hualong Amusement Equipment Co., Ltd., Jilin Special Equipment Inspection and Research Institute (Jilin Special Equipment Accident Investigation and Handling Service Center), Zhongchang Special Equipment (Shanghai) Co., Ltd. The main drafters of this document are. Guo Junjie, Cui Hongwei, Song Weike, Zhang Jian, Sun Yifeng, Dai Lili, Huang Yu, Chen Zheng, Xu Ping, Wang Chengzhan, Huang Baozhong, Teng Guilong, Zhang Pengfei, Luo Changchun, Che Shuai, Wang Yong, Yang Bo, and Zhang Yang. This document was first published in.2006 and this is the first revision. General technical requirements for aerialists1 ScopeThis document specifies the technical requirements, inspection and testing, accompanying documents, marking, packaging, transportation and storage of aerial devices. This document applies to the design, manufacture, installation, testing and use of aerial trapeze equipment.2 Normative referencesThe contents of the following documents constitute the essential clauses of this document through normative references in this document. For referenced documents without a date, only the version corresponding to that date applies to this document; for referenced documents without a date, the latest version (including all amendments) applies to This document. GB/T 191 Pictorial markings for packaging, storage and transportation GB/T 5226.1 Electrical safety of machinery - Electrical equipment of machinery - Part 1.General technical requirements GB 5725 Safety Net GB 8408 Safety Specifications for Large Amusement Facilities GB/T 8918 Steel Wire Rope for Important Purposes GB/T 8923 (all parts) Surface preparation of steel materials before coating - Visual assessment of surface cleanliness GB/T 9075 Specification for inspection and scrapping of steel wire ropes for ropeways GB/T 9286-2021 Paints and varnishes - Cross-cut test GB/T 13384 General technical requirements for packaging of electromechanical products GB/T 13912 Technical requirements and test methods for hot-dip galvanized coatings on metallic steel products GB/T 20050-2020 General requirements for inspection and testing of large amusement facilities GB/T 20306 Terminology of Amusement Facilities GB/T 34370.9 Non-destructive testing of amusement rides Part 9.Magnetic flux leakage testing GB/T 34371 General principles for risk assessment of amusement facilities GB/T 39043 Risk Assessment of Amusement Facilities - Hazard Sources GB 50009 Code for Loads on Building Structures GB/T 50011 Building Seismic Design Standard GB 50017 Steel Structure Design Standard GB 50135 Design Standard for Tall Structures GB 50231 General specification for construction and acceptance of mechanical equipment installation projects3 Terms and DefinitionsThe terms and definitions defined in GB/T 20306 and the following apply to this document. 3.1 flying trapeze The passenger (passenger device) is lifted (lowered) to a certain height by a wire rope or other rope through the lifting device, and the passenger (passenger device) is lifted (lowered) to a certain height by its own momentum. It is a large-scale amusement facility that can swing back and forth around the suspension point and has a flexible suspension structure. ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 20051-2025_English be delivered?Answer: Upon your order, we will start to translate GB/T 20051-2025_English as soon as possible, and keep you informed of the progress. The lead time is typically 2 ~ 4 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 20051-2025_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 20051-2025_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 20051-2025?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 20051-2025 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
