Home Cart Quotation About-Us
www.ChineseStandard.net
SEARCH

GB/T 2-2016 PDF English

US$90.00 · In stock · Download in 9 seconds
GB/T 2-2016: Fasteners -- Ends of parts with external thread
Delivery: 9 seconds. True-PDF full-copy in English & invoice will be downloaded + auto-delivered via email. See step-by-step procedure
Status: Valid

GB/T 2: Historical versions

Standard IDUSDBUY PDFDeliveryStandard Title (Description)Status
GB/T 2-201690 Add to Cart Auto, 9 seconds. Fasteners -- Ends of parts with external thread Valid
GB/T 2-2001279 Add to Cart 3 days Fasteners -- Ends of parts with external thread Obsolete
GB/T 2-1985199 Add to Cart 2 days Fasteners--Ends of parts with external thread Obsolete

Similar standards

GB/T 8   GB/T 32.1   GB/T 32.3   GBZ 2.1   

GB/T 2-2016: Fasteners -- Ends of parts with external thread

---This is an excerpt. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.), auto-downloaded/delivered in 9 seconds, can be purchased online: https://www.ChineseStandard.net/PDF.aspx/GBT2-2016
GB NATIONAL STANDARD OF THE PEOPLE’S REPUBLIC OF CHINA ICS 21.060.10 J 13 Replacing GB/T 2-2001 Fasteners – Ends of Parts with External Thread (ISO 4753.2011, Fasteners – Ends of Parts with External ISO Metric Thread, MOD) Issued on: FEBRUARY 24, 2016 Implemented on: JUNE 1, 2017 Issued by. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China; Standardization Administration of the People's Republic of China.

Table of Contents

Foreword ... 3 1 Application Scope ... 4 2 Normative References ... 4 3 Dimensions... 4 3.1 General ... 4 3.2 Ends which are included in the nominal length of the fastener ... 4 3.3 Ends which are added to the specified nominal length of the fastener ... 8

Foreword

This Standard was drafted in accordance with the rules given in GB/T 1.1-2009. This Standard replaces GB/T 2-2001, Fasteners – Ends of Parts with External Thread. Compared with GB/T 2-2001, the major technical changes of this Standard are as follows. -- it modifies the standard name; -- it adds the end type of threaded cone point (CA) (3.2); -- it modifies the values of end chamfers (3.2, 3.3). This Standard was redrafted by modifying and adopting ISO 4753.2011, Fasteners – Ends of Parts with External ISO Metric Thread (English version). The technical differences between this Standard and ISO 4753.2011 and their reasons are as follows. -- in Normative References, Chinese standards are used to replace international standards (Chapter 2) to conform to Chinses basic standards of fasteners. The following editorial change is made in this Standard. -- it modifies the standard name. This Standard was proposed by China Machinery Industry Federation. This Standard shall be under the jurisdiction of the National Standardization Technical Committee on Fasteners (SAC/TC 85). The responsible drafting organization of this Standard. China Productivity Center for Machinery. The contributory drafting organizations of this Standard. Shaoxing Sunny High Strength Fasteners Co., Ltd., Shanghai Jinma High Strength Fasteners Co., Ltd.. This Standard shall be interpreted by the Secretariat of the National Standardization Technical Committee on Fasteners. The previous editions of the standard replaced by this Standard are as follows. -- GB/T 2-1958, GB/T 2-1976, GB/T 2-1985, GB/T 2-2001. Fasteners – Ends of Parts with External Thread

1 Application Scope

This Standard specifies the form and dimensions of ends of parts with external metric screw thread (e.g. bolt, screw and stud ends) recommended for use. This Standard applies to standardized or non-standardized threaded parts. For each end type, a symbol is specified and it is intended that these symbols be used when specifying one of the ends for threaded fasteners.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition dated applies to this document. For undated references, the latest edition of the referenced documents (including all amendments) applies to this Standard. GB/T 78, Hexagon Socket Set Screws with Cone Point (GB/T 78-2007, ISO 4027.2003) GB/T 5276, Fasteners – Bolts, Screws, Studs and Nuts – Symbols and Descriptions of Dimensions (GB/T 5276-2015, ISO 225.2010, MOD)

3 Dimensions

3.1 General See Figures 1 and 2 and Tables 1 to 4 for the form and dimensions of ends. Symbols and descriptions of dimensions are specified in GB/T 5276. 3.2 Ends which are included in the nominal length of the fastener ......
Source: Above contents are excerpted from the full-copy PDF -- translated/reviewed by: www.ChineseStandard.net / Wayne Zheng et al.
Image 1     Image 2     Image 3     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of English version of GB/T 2-2016 be delivered?Answer: The full copy PDF of English version of GB/T 2-2016 can be downloaded in 9 seconds, and it will also be emailed to you in 9 seconds (double mechanisms to ensure the delivery reliably), with PDF-invoice.

Question 2: Can I share the purchased PDF of GB/T 2-2016_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 2-2016_English will be deemed to be sold to your employer/organization who actually paid for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?Answer: Yes. www.ChineseStandard.us -- GB/T 2-2016 -- Click this link and select your country/currency to pay, the exact amount in your currency will be printed on the invoice. Full PDF will also be downloaded/emailed in 9 seconds.

Question 5: Should I purchase the latest version GB/T 2-2016?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 2-2016 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.

How to buy and download a true PDF of English version of GB/T 2-2016?

A step-by-step guide to download PDF of GB/T 2-2016_EnglishStep 1: Visit website https://www.ChineseStandard.net (Pay in USD), or https://www.ChineseStandard.us (Pay in any currencies such as Euro, KRW, JPY, AUD).
Step 2: Search keyword "GB/T 2-2016".
Step 3: Click "Add to Cart". If multiple PDFs are required, repeat steps 2 and 3 to add up to 12 PDFs to cart.
Step 4: Select payment option (Via payment agents Stripe or PayPal).
Step 5: Customize Tax Invoice -- Fill up your email etc.
Step 6: Click "Checkout".
Step 7: Make payment by credit card, PayPal, Google Pay etc. After the payment is completed and in 9 seconds, you will receive 2 emails attached with the purchased PDFs and PDF-invoice, respectively.
Step 8: Optional -- Go to download PDF.
Step 9: Optional -- Click Open/Download PDF to download PDFs and invoice.
See screenshots for above steps: Steps 1~3    Steps 4~6    Step 7    Step 8    Step 9