GB/T 19769.4-2022 English PDFUS$244.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19769.4-2022: Function blocks - Part 4: Rules for compliance profiles Status: Valid GB/T 19769.4: Historical versions
Basic dataStandard ID: GB/T 19769.4-2022 (GB/T19769.4-2022)Description (Translated English): Function blocks - Part 4: Rules for compliance profiles Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: N10 Word Count Estimation: 13,111 Issuing agency(ies): State Administration for Market Regulation, China National Standardization Administration GB/T 19769.4-2022: Function blocks - Part 4: Rules for compliance profiles---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Function blocks -- Part 4.Rules for compliance profiles ICS 25.040.40 CCSN10 National Standards of People's Republic of China Replacing GB/T 19769.4-2015 Function Blocks Part 4.Rules for Conformance Profiles (IEC 61499-4.2013, IDT) Published on 2022-04-15 2022-11-01 Implementation State Administration for Market Regulation Released by the National Standardization Administration directory Preface III Introduction V 1 Scope 1 2 Normative references 1 3 Terms and Definitions 2 4 Contents of Conformance Profile 3 4.1 Structure of Conformance Profile 3 4.2 General Clause 3 of the Conformance Profile 4.2.1 Scope 3 4.2.2 Normative references 3 4.2.3 Terms and Definitions 4 4.3 Portability Clause 4 4.4 Interoperability Clause 4 4.5 Configurability Clause 4 4.6 Test Requirements 4 4.7 Appendix 4 Appendix A (Informative) Conformance Profile Example 5 Appendix B (Informative) Device Configurability Class Example 6 Reference 7 Figure 1 Typical Conformance Profile 1 Table 1 Contents of Conformance Profiles 3 Table B.1 Equipment Configurability Class (Informative) 6 forewordThis document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1.Structure and Drafting Rules of Standardization Documents" drafted. This document is part 4 of GB/T 19769.GB/T 19769 has released the following parts. ---GB/T 19769.1 Function Block Part 1.Structure; ---GB/T 19769.2 Function Block Part 2.Requirements for Software Tools; --- GB/T 19769.3 Industrial Process Measurement and Control Systems - Part 3.Guidance Information; ---GB/T 19769.4 Function Block Part 4.Rules for Conformance Profiles. This document replaces GB/T 19769.4-2015 "Function Block Part 4.Guidelines for Conformance Profiles", and GB/T 19769.4-2015 In contrast, except for structural adjustments and editorial changes, the main technical changes are as follows. --- "Here < yyy > indicates the scope of applicability of this profile" and added "such as 'feasibility demonstration'" (see 4.1, 4.1 of the.2015 edition); --- Deleted "General Provisions" in Table 1 (see Table 1, Table 1 of the.2015 edition); --- "The type of application proposed by the conformance profile" is changed to "the intended use of the conformance profile" [see 4.2.1a),.2015 edition 4.2.1a)]; --- "Chapter 3 of the Conformance Profile should follow ISO /IEC Guidelines Part 2.6.3.1 of.2011" added "and Appendix D" (See 4.2.3, 4.2.3 of the.2015 edition); --- "Note. The syntax of the input and output of events and data of the communication function block can be, but is not required to be used to meet the requirements of this article." More Changed to text (see 4.4, 4.4 of the.2015 edition); --- "In order to obtain the configurability of software tools to equipment, Chapter 4 of the conformance profile shall specify what equipment and software tools are to achieve. method (if any). This may include one or more configurability classes about the device. " to "Consistent Profile's Clause 6 shall specify the means by which devices and software tools achieve configurability. This may include one or more device configurable classes of definition. " (see 4.5, 4.5 of the.2015 edition); --- "Chapter 5 of the conformance profile shall define the tests to be performed" is changed to "Chapter 7 of the conformance profile shall specify the tests to be performed try (if any)" (see 4.6, 4.6 of the.2015 edition); --- "Object" removed all "access_path_name" lines; changed "READ" and "WRITE" lines; added Added "RESET" line; deleted footnotes b and c (see Table B.1,.2015 edition of Table B.1). This document is identical to IEC 61499-4.2013 "Function Block Part 4.Rules for Conformance Profiles". Please note that some content of this document may be patented. The issuing agency of this document assumes no responsibility for identifying patents. This document is proposed by China Machinery Industry Federation. This document is under the jurisdiction of the National Technical Committee for Standardization of Industrial Process Measurement and Control (SAC/TC124). This document is drafted by. Southwest University, Xiamen Yudian Automation Technology Co., Ltd., Chongqing Naide Automation Technology Co., Ltd., Hanweike Technology Group Co., Ltd., Anhui Automation Instrument Co., Ltd., Shaanxi Chuangwei Technology Co., Ltd., EVOC Intelligent Technology Co., Ltd., Shenzhen Future Intelligent Control Technology Co., Ltd., Qingdao Automation Instrument Co., Ltd., Jiangsu Huaxia Instrument Co., Ltd., Shandong Frederic Measurement and Control System Co., Ltd., Xiamen Anton Electronics Co., Ltd., Zhejiang Zhongtuo Hekong Technology Co., Ltd., Shanghai Jiaotong University, Schneider Electric (China) Co., Ltd. Company Shanghai Branch, Shenzhen Ertai Technology Co., Ltd., Anhui Tiankang (Group) Co., Ltd., Nanjing Keda New Control Instrument Co., Ltd. Company, Chongqing Wei'an Tester Manufacturing Co., Ltd., Shenzhen Hengliu Technology Co., Ltd., Zhongshan Dongfeng Town Burlington Electronic Appliance Factory, Luo Kwell Automation (China) Co., Ltd., Dandong Tongbo Electric (Group) Co., Ltd., Chongqing Industrial Automation Instrumentation Research Institute, Shenyang Zhongke Bowei Technology Co., Ltd. The main drafters of this document. Xie Tangtang, Zhou Xuelian, Qi Qian, Liu Feng, Zhang Xinguo, Jiang Yanfang, Wang Wansheng, Wu Chuanwei, Ke Youxi, Wu Hongwei, Pang Guanshi, Wei Tiancai, Yang Weishan, Sun Jianyu, Ji Xingfang, Xiao Guozhuan, Chen Haidong, Dai Wenbin, Chen Xiaocong, Zheng Yanzhe, Mao Wenwen, Liu Yanshan, Tang Tian, Liao Qiong, Liang Wanqing, Gao Jingmei, Zhang Yiding, Liu Chunlei, Jin Guangshu, Zhou Zhiran, Wang Tongyu. The previous versions of the documents replaced by this document are as follows. ---GB/T 19769.4-2007, GB/T 19769.4-2015.IntroductionGB/T 19769 consists of the following parts. ---GB/T 19769.1, including the following. ● general requirements, including scope, normative references, definitions and reference models; ● Rules for declaring function block types and rules for the behavior of instances of that type; ● Rules for the use of function blocks in configuring a distributed industrial process measurement and control system (IPMCS); ● Rules for the use of function blocks in meeting the communication requirements of distributed IPMCS; ● In the distributed IPMCS, when managing applications, resources and equipment, the rules for the use of function blocks. ---GB/T 19769.2, defines the software tool requirements to support the following system engineering tasks. ● Specification of function block types; ● Functional specification of resource types and device types; ● Specification, analysis and verification of distributed IPMCS; ● Configuration, implementation, operation and maintenance of distributed IPMCS; ● Information exchange between software tools. --- GB/T 19769.3, the purpose is to promote understanding and acceptance, promote the general and domain-specific applicability of IPMCS structure, promote Advanced software tools meet the needs of other parts by providing. ● FAQs about GB/T 19769 (all parts); ● An example of using GB/T 19769.1 to solve problems commonly encountered in control and automation engineering. The IEC standard adopted in this part has been withdrawn, but subsequent IEC editions may be updated in the future, so this part will follow the IEC edition Revised in this update. --- GB/T 19769.4, specifies the characteristics of GB/T 19769.1 and GB/T 19769.2 to be implemented in order to promote The following attributes of systems, equipment and software tools of GB/T 19769. ● Interoperability of equipment from multiple vendors; ● portability between software tools provided by multiple vendors; ● Configurability of multiple vendor software for equipment from different manufacturers. Function Blocks Part 4.Rules for Conformance Profiles1 ScopeThis document specifies the rules for the development of a conforming profile that specifies what IEC 61499-1 and IEC 61499-2 are to achieve characteristics to exploit the following properties of systems, equipment and software tools based on IEC 61499 (all parts). --- Interoperability of equipment from multiple vendors; --- software portability between software tools from multiple vendors; ---Multiple vendor software tools, configurability to devices from multiple vendors. These properties are illustrated in Figure 1. Note 1.The sensor/actuator link indicated in Figure 1 The contents of the following documents constitute essential provisions of this document through normative references in the text. Among them, dated citations documents, only the version corresponding to that date applies to this document; for undated references, the latest edition (including all amendments) applies to this document. GB/T 19769.2-2022 Function blocks Part 2.Requirements for software tools (IEC 61499-2.2012, IDT) ......Tips & Frequently Asked Questions:Question 1: How long will the true-PDF of GB/T 19769.4-2022_English be delivered?Answer: Upon your order, we will start to translate GB/T 19769.4-2022_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.Question 2: Can I share the purchased PDF of GB/T 19769.4-2022_English with my colleagues?Answer: Yes. The purchased PDF of GB/T 19769.4-2022_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.Question 3: Does the price include tax/VAT?Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countriesQuestion 4: Do you accept my currency other than USD?Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.Question 5: Should I purchase the latest version GB/T 19769.4-2022?Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 19769.4-2022 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically. |
