GB/T 1934.2-2009 English PDF

US$279.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 1934.2-2009: Method for determination of the swelling of wood
Status: Obsolete

GB/T 1934.2: Historical versions

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 1934.2-2009	279	Add to Cart	3 days	Method for determination of the swelling of wood	Obsolete
GB/T 1934.2-1991	199	Add to Cart	2 days	Method for determination of the swelling of wood	Obsolete

Similar standards

LY/T 2407   GB/T 30762   GB/T 26900   GB/T 45887   GB/T 4815   GB/T 6043   

Basic data

Standard ID: GB/T 1934.2-2009 (GB/T1934.2-2009)
Description (Translated English): Method for determination of the swelling of wood
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: B60
Classification of International Standard: 79.020
Word Count Estimation: 6,643
Date of Issue: 2009-02-23
Date of Implementation: 2009-08-01
Older Standard (superseded by this standard): GB/T 1934.2-1991
Quoted Standard: GB/T 1928-2009; GB/T 1929-2009; GB/T 1931-2009
Adopted Standard: ISO 4859-1982, MOD; ISO 4860-1982, MOD
Regulation (derived from): National Standard Approval Announcement 2009 No.3 (Total No.143)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the expansion of test equipment measuring timber wet, specimens, test procedures and results of calculations. This section applies to a small sample timber unblemished radial, tangential swelling and swelling of volume measurement.

GB/T 1934.2-2009: Method for determination of the swelling of wood

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Method for determination of the swelling of wood ICS 79.020 B60 National Standards of People's Republic of China Replacing GB/T 1934.2-1991 Swelling of wood measuring method (ISO 4859. 1982, Wood-Determinationofradialandtangentialsweling; ISO 4860. 1982, Wood-Determinationofvolumetricsweling, MOD) Posted 2009-02-23 2009-08-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Foreword

GB/T 1934 is divided into two parts. --- Determination of water absorption of wood; --- Wood Swelling of the measurement method. This section GB/T 1934.2 "measuring method dilation wet wood." The partial modification of the use of ISO 4859. 1982 "Wood radial and tangential swelling determination" and ISO 4860. 1982 "Timber volume wet Expansion determination. " This part of ISO 4859. 1982 and ISO 4860. 1982 The main technical differences compared as follows. --- The above two international standards into a single standard. This Part replaces GB/T 1934.2-1991 "timber method Swelling determination." This section compared with the GB/T 1934.2-1991, the main changes are as follows. --- Revised principles; --- Combined volume swelling and swelling of the line measured in the "sample" and "test steps" and the title number accordingly modify; --- In Chapter 6, the test procedure increases the "need to calculate when the volume swelling ratio, measured parallel to the grain direction of the length of the sample to the nearest 0.001mm "requirements; --- Appendix A partly modified. Appendix A of this part is a normative appendix. This part by the State Forestry Administration. This part of the National Standardization Technical Committee centralized timber. This section is responsible for drafting units. China Forestry Science Institute of Wood Industry. This section participated in the drafting unit. China Academy of Forestry Forest Research Institute of New Technology, Chinese Academy of Forestry Beijing forest machines. The main drafters of this section. Huangrong Feng, Zhao ke, Lv Jianxiong, this fee Hua Zhao Rongjun, Yuhua Jiang, Huang Anmin. This section was first released in 1980, the first revision in 1991, this is the second revision. This part of the National Standardization Technical Committee responsible for the interpretation of wood. Swelling of wood measuring method

1 Scope

GB/T 1934 This section provides the expansion of test equipment, samples, test procedures and results of calculation of measured wet wood. This section applies to a small wood unblemished specimens of radial and tangential swelling and swelling of volume measurement.

2 Normative references

The following documents contain provisions which, through reference to GB/T 1934 to the present, constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. GB/T 1928-2009 physical and mechanical test methods - General GB/T 1929-2009 physical and mechanical test materials and test specimens sawing method GB/T 1931-2009 Method for determination of moisture content of wood Principle 3 Dry wood absorbs moisture or water, its size and volume with increasing moisture content and expansion. From wood to-dry moisture to the atmosphere with a relative humidity Degree of balance or water to change the size or volume ratio, when saturated at full size or volume of the dry, wet wood showing dilatancy.

4 Test Equipment

4.1 length measurement tool, measurements should be accurate to 0.001mm. 4.2 container impregnated sample. 4.3 GB/T 1931-2009 Chapter 3 test equipment requirements.

5 Sample

5.1 test material sawing and test specimens according to the provisions of GB/T 1929-2009 Chapter 3 performed. 5.2 Sample size is 20mm × 20mm × 20mm. Sample preparation and testing accuracy specified by GB/T 1928-2009 Chapter 3 get on.

6 Test procedure

6.1 The sample was placed in an oven starting temperature 60 ℃ for about 4h, then press 1931-2009 specified in GB/T 5.2 of the sample 6.2 The sample was placed in a temperature (20 ± 2) ℃, relative humidity (65 ± 3)% of moisture to dimensionally stable condition. In the adsorption process, with When two or three specimens, the test measured once every 6h chord dimension changes, to the difference between the two measurements is not more than 0.2mm, namely that the foot Length, accurate to 0.001mm. 6.3 Measurement sample size after immersion in distilled water filled container, the size of the water to be absorbed stable. To test the sample size As the two measurements no greater than 0.02mm, the size that is considered to stabilize and then measure the radial chord all the samples to size. ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 1934.2-2009_English be delivered?

Answer: Upon your order, we will start to translate GB/T 1934.2-2009_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 1934.2-2009_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 1934.2-2009_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.

Question 5: Should I purchase the latest version GB/T 1934.2-2009?

Answer: Yes. Unless special scenarios such as technical constraints or academic study, you should always prioritize to purchase the latest version GB/T 1934.2-2009 even if the enforcement date is in future. Complying with the latest version means that, by default, it also complies with all the earlier versions, technically.