GB/T 19290.3-2008 English PDF

US$194.00 · In stock
Delivery: <= 3 days. True-PDF full-copy in English will be manually translated and delivered via email.
GB/T 19290.3-2008: Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an
Status: Valid

Standard ID	USD	BUY PDF	Lead-Days	Standard Title (Description)	Status
GB/T 19290.3-2008	194	Add to Cart	3 days	Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an	Valid

Similar standards

GB/T 30137   NB/T 10613   GB/T 20877   GB/T 19290.7   GB/T 19290.6   GB/T 19290.5   

Basic data

Standard ID: GB/T 19290.3-2008 (GB/T19290.3-2008)
Description (Translated English): Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an
Sector / Industry: National Standard (Recommended)
Classification of Chinese Standard: K05
Classification of International Standard: 31.240
Word Count Estimation: 10,170
Date of Issue: 2008-11-13
Date of Implementation: 2009-11-01
Quoted Standard: GB/T 19290.1-2003; GB/T 19290.2-2003; IEC 60917-2-2-1994
Adopted Standard: IEC 60917-2-1-1993, IDT
Regulation (derived from): Announcement of Newly Approved National Standards No. 19 of 2008 (No. 132 overall)
Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China
Summary: This standard specifies the cabinet or rack, and insert box installed with mechanical interchangeability dimensions. Cabinets and racks can be configured to work together to form a larger unit. Specific cabinet or rack applications,

GB/T 19290.3-2008: Modular order for the development of mechanical structures for electronic equipment practices -- Part 2-1: Sectional specification -- Interface co-ordination dimensions for the 25 mm equipment practice -- Detail specification -- Dimensions for cabinets an

---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.
Modular order for the development of mechanical structures for electronic equipment practices Part 2-1. Sectional specification Interface co-ordination dimensions for the 25 mm equipment practice Detail specification Dimensions for cabinets and racks.. ICS 31.240 K05 National Standards of People's Republic of China GB/T 19290.3-2008/IEC 60917-2-1.1993 The development of an electronic device mechanical structure isomer number sequence mode Part 2-1. Sectional specification 25 m1 m1 equipment practice Interface coordination dimensions detail specification Size cabinets and racks (IEC 60917-2-1.1993, IDT) Posted 2009-11-01 2008-11-13 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released

Table of Contents

Preface Ⅰ 1 Scope 1 2 Normative references 1 3 1 configuration profiles Size 2 4 4.1 Cabinet 2 4.2 Rack 6 5 Internal Connection size 6 GB/T 19290.3-2008/IEC 60917-2-1.1993

Foreword

GB/T 19290 "in the development of mechanical structures for electronic equipment modulus sequence" is divided into the following five sections. --- Part 1. Generic specification; --- Part 2. Sectional specification - Interface coordination dimensions 25mm equipment practice; --- Part 2-1. Sectional specification - Interface co - ordination dimensions for the 25mm equipment detailed specifications and dimensions of the cabinet rack; --- Part 2-2. Sectional specification - Interface co - ordination dimensions for the 25mm equipment detailed specification into me, chassis, backplane, and panel Size plug-in; --- Part 2-3. Sectional specification detailed specification of the interface coordination dimensions for the 25mm equipment expansion subracks, chassis, backplanes, Size panels and plug-ins. This section GB/T 19290 Part 2-1. This section identical with IEC 60917-2-1.1993 "in the development of electronic equipment - Part 2 isomer mechanical structure number sequence mode. dividers Fan Interface coordination dimensions for the 25mm equipment of the first one. Detailed specifications and dimensions of the cabinet rack "(in English). For ease of use, this section made the following editorial changes. a) "This is a" replaced by "this section"; b) Remove the preface international standards; c) the decimal point "," to "."; d) According to GB/T 1.1-2000 provisions of the table to note table footnote. This part of the electrical and electronic equipment by the National Standardization Technical Committee integrated structure (SAC/TC34) and focal points. This section is drafted. ZTE Corporation, State Grid Electric Power Research Institute, Hong Kong cabinet Jiangsu days Ltd., the Quartet Electric (Group) Co., Ltd., Guodian Nanjing Automation Co., Ltd., China Shipbuilding Industry Corporation seventh fifteen Institute. The main drafters of this section. Bo, Yin sword, Wang Wei, Zhang Yu, Wuzhen Xiang, Zhang Kaiguo, Wu Bei Guo. GB/T 19290.3-2008/IEC 60917-2-1.1993 The development of an electronic device mechanical structure isomer number sequence mode Part 2-1. Sectional specification 25 m1 m1 equipment practice Interface coordination dimensions detail specification Size cabinets and racks

1 Scope

This section is full or in part in accordance with all the electronics field specification GB/T 19290.2-2003 design devices and systems A detailed specification. This section table size selected specification GB/T 19290.2-2003. Retained all the other specification of this section provides foot Effective size inch relations, retains the coordination dimension Hc Tables 1 to 3 represented, Wc and Dc and size Hc0, Hc1, Hc2, Wc0, Wc1 and Dc0, the difference in size between the Dc1. This part of the purpose is to regulate to ensure that the cabinet or rack, and insert those dimensions box with mechanical interchangeability. Cabinets and racks It can be configured together to form a larger unit of work. Application specific cabinet or rack, fittings and accessories (such as heat exchangers, control units, switches, etc.), not as an integral part of this section.

2 Normative references

The following documents contain provisions which, through reference GB/T 19290 in this section constitute provisions of this section. For dated reference documents Member, all subsequent amendments (not including errata content) or revisions do not apply to this section, however, encouraged to reach under this section Parties to research agreement to use the latest versions of these documents. For undated reference documents, the latest versions apply to this section. Mechanical structures for electronic equipment modulo sequence Part 1 Development of GB/T 19290.1-2003. Generic specification (IEC 60917-11).1998, IDT) GB/T 19290.2-2003 development of electronic equipment - Part 2 isomer mechanical structure number sequence mode. Sectional specification set 25mm Interface coordination dimensions prepared isomer of (IEC 60917-2.1992, IDT) IEC 60917-2-2.1994 in the development of electronic equipment - Part 2 isomer mechanical structure number sequence mode. Sectional specification set 25mm Interface coordination dimensions isomer prepared the first two. Detailed specifications Dimensions plug-in box, chassis, backplanes, panels and plug-ins 1) IEC 60917-1.1998 has been replaced by IEC 60916. 1988, IEC 60917. 1988 and its Amendment 1 and IEC 60917-0. 1989. In a later article In this paper, if the above is replaced by the standard appears, are replaced by IEC 60917-1.

3 configuration profiles

Subracks and panel details, see IEC 60917-2-2.1994. With plug boxes, panels and installation accessories cabinet shown in Figure 1. GB/T 19290.3-2008/IEC 60917-2-1.1993 ......

Image     

Tips & Frequently Asked Questions:

Question 1: How long will the true-PDF of GB/T 19290.3-2008_English be delivered?

Answer: Upon your order, we will start to translate GB/T 19290.3-2008_English as soon as possible, and keep you informed of the progress. The lead time is typically 1 ~ 3 working days. The lengthier the document the longer the lead time.

Question 2: Can I share the purchased PDF of GB/T 19290.3-2008_English with my colleagues?

Answer: Yes. The purchased PDF of GB/T 19290.3-2008_English will be deemed to be sold to your employer/organization who actually pays for it, including your colleagues and your employer's intranet.

Question 3: Does the price include tax/VAT?

Answer: Yes. Our tax invoice, downloaded/delivered in 9 seconds, includes all tax/VAT and complies with 100+ countries' tax regulations (tax exempted in 100+ countries) -- See Avoidance of Double Taxation Agreements (DTAs): List of DTAs signed between Singapore and 100+ countries

Question 4: Do you accept my currency other than USD?

Answer: Yes. If you need your currency to be printed on the invoice, please write an email to Sales@ChineseStandard.net. In 2 working-hours, we will create a special link for you to pay in any currencies. Otherwise, follow the normal steps: Add to Cart -- Checkout -- Select your currency to pay.