GB/T 19281-2014 English PDFUS$669.00 · In stock
Delivery: <= 5 days. True-PDF full-copy in English will be manually translated and delivered via email. GB/T 19281-2014: Analytic method for calcium carbonate Status: Valid GB/T 19281: Historical versions
Basic dataStandard ID: GB/T 19281-2014 (GB/T19281-2014)Description (Translated English): Analytic method for calcium carbonate Sector / Industry: National Standard (Recommended) Classification of Chinese Standard: G10 Classification of International Standard: 71.060.01 Word Count Estimation: 29,271 Date of Issue: 7/8/2014 Date of Implementation: 12/1/2014 Older Standard (superseded by this standard): GB/T 19281-2003 Quoted Standard: GB/T 3049-2006; GB/T 4472-2011; GB/T 6682-2008; GB/T 12804-2011; GB/T 19587-2004; GB/T 21058-2007; GB/T 23769-2009; GB/T 23774-2009; HG/T 3696.1; HG/T 3696.2; HG/T 3696.3 Regulation (derived from): 2014 National Standards Bulletin No. 18 Issuing agency(ies): General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China, Standardization Administration of the People's Republic of China Summary: This standard specifies the calcium carbonate product analysis of physical and chemical parameters. This standard applies to industrial calcium carbonate products. GB/T 19281-2014: Analytic method for calcium carbonate---This is a DRAFT version for illustration, not a final translation. Full copy of true-PDF in English version (including equations, symbols, images, flow-chart, tables, and figures etc.) will be manually/carefully translated upon your order.Analytic method for calcium carbonate ICS 71.060.01 G10 National Standards of People's Republic of China Replacing GB/T 19281-2003 Calcium carbonate Analysis Issued on. 2014-07-08 2014-12-01 implementation Administration of Quality Supervision, Inspection and Quarantine of People's Republic of China Standardization Administration of China released Table of ContentsIntroduction Ⅲ 1 Scope 1 2 Normative references 1 3 Analysis 1 3.1 General Provisions 1 3.2 Identification Test 1 3.3 Determination of calcium content of 2 3.4 Determination of magnesium content of 3 3.5 Determination of alkali metal and magnesium content of 4 3.6 Determination of iron content 5 3.7 Determination of Fe and Al oxides 6 3.8 Determination of manganese content of 7 3.9 Determination of copper content of 8 Determination of heavy metal content of 3.10 9 Determination of arsenic content 10 3.11 Determination of barium content of 10 3.12 Determination of volatile matter content under 3.13 105 ℃ 11 Determination of loss on ignition 3.14 11 Determination of 3.15 hydrochloric acid insoluble matter content of 12 Determination of water-soluble substance 12 3.16 Determination of free alkali content of 3.17 13 Determination of 3.18 pH 14 3.19 Determination of the degree of activation of 14 Determination of oil absorption value of 15 3.20 3.21 Determination of sieve residue 15 Determination of sedimentation volume 16 3.22 Determination of whiteness 16 3.23 3.24 Density Determination 16 Determination of the specific surface area of \u200b\u200b16 3.25 Determination of particle size 17 3.26 Determination of aluminum content of 17 3.27 Determination of wear rate 18 3.28 Determination of cadmium content 20 3.29 3.30 Determination of lead content and nickel content of 21 Determination of hexavalent chromium content of 22 3.31 Determination of mercury content of 23 3.32 Processing Appendix A (informative) mercury-containing waste 25ForewordThis standard was drafted in accordance with GB/T 1.1-2009 given rules. This standard replaces GB/T 19281-2003 "calcium analysis methods," compared with the GB/T 19281-2003, in addition to editorial changes outside The main technical changes are as follows. --- Increasing the aluminum content, the wear rate, the content of cadmium, lead content, nickel content, hexavalent chromium and mercury content determination method (see 3.27 ~ 3.32); --- After the determination of the content of alkali metal and magnesium sulfate was added to the firing temperature was adjusted (see 354, 2003 edition of 3.6.3.); --- The determination of manganese content in heating boiling time has been adjusted (see 3841, 2003, edition of 3.9.4.1...); --- On the determination of loss on ignition temperature has been adjusted (see 3142, 2003 version 3.15.2.); --- The measurement time oil absorption values \u200b\u200bwere adjusted (see 3203, 2003 version 3.21.3.); --- Measure the particle size increases the laser particle size analyzer method (see 3.26 2, 2003 version 3.27). The standard proposed by China Petroleum and Chemical Industry Association. This standard by the National Standardization Technical Committee chemical inorganic chemicals Club (SAC/TC63/SC1) centralized. This standard was drafted. Jiande Tianshi Calcium Carbonate Co., Ltd., CNOOC Tianjin Chemical Research & Design Institute, Guangxi Hezhou Cologne Powder Co., Ltd. Zhejiang Xuefeng calcium carbonate, Jiande City Yunfeng calcium carbonate Ltd., southeast New Materials Co., Jiande Xinglong calcium Co., Jiande Hongxing calcium industry limited liability company. The main drafters of this standard. Chen Chunyu, Lusi Wei, Zhang Xiaoyan, Shen Nan Xing, Yao Yucheng, Wuxi Hai, Zhangen Song, Zhou Jianhong. This standard replaces the standards previously issued as follows. --- GB/T 19281-2003. Calcium carbonate Analysis1 ScopeThis standard specifies the calcium carbonate product analysis of physical and chemical parameters. This standard applies to industrial calcium carbonate products.2 Normative referencesThe following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document. General Method GB/T 3049-2006 industrial chemicals determination of iron content 1,10-phenanthroline spectrophotometry Determination of GB/T 4472-2011 Chemical density, relative density Laboratory use specifications and test methods GB/T 6682-2008 Analysis GB/T 12804-2011 laboratory glassware cylinder Determination of solid material surface area GB/T 19587-2004 gas adsorption BET method GB/T 21058-2007 inorganic chemical products common method of mercury determination flameless atomic absorption spectrometry GB/T 23769-2009 aqueous solution of inorganic chemical products - General method for determination of pH General Method GB/T 23774-2009 inorganic chemical products whiteness measurement HG/T 3696.1 inorganic chemical products, chemical analysis standard solution, Preparations Part 1. Standard titration solution Preparation liquid HG/T 3696.2 inorganic chemical products, chemical analysis standard solution, Preparations Part 2. impurity standard solution Preparation liquid HG/T 3696.3 inorganic chemical products, chemical analysis standard solution, Preparations Part 3. Formulation and products Preparation3 AnalysisWARNING. Some reagents used in this test method are toxic or corrosive, care should be taken immediately on contact with skin, such as! Rinsed with water, severe cases should be treated immediately. 3.1 General provisions This standard reagents and water in the absence of other specified requirements, refer to analytically pure reagents and GB/T 6682-2008 stipulated three Grade water. When used in the test standard titration solution, impurities measured by standard solution, preparations and products, not specified in other requirements, according HG/T 3696.1, HG/T 3696.2, HG/T 3696.3 regulations prepared. 3.2 Identification Test 3.2.1 Reagents 3.2.1.1 ethanol. ...... |
